From: "Américo Wang" <xiyou.wangcong@gmail.com>
To: Earl Chew <earl_chew@agilent.com>
Cc: linux-kernel@vger.kernel.org, Al Viro <viro@zeniv.linux.org.uk>,
linux-fsdevel@vger.kernel.org
Subject: Re: [PATCH v4 1/1]: fs: pipe.c null pointer dereference + really sign off + unmangled diffs
Date: Wed, 21 Oct 2009 17:38:22 +0800 [thread overview]
Message-ID: <2375c9f90910210238i744fec42gb4d9a1c5229696f0@mail.gmail.com> (raw)
In-Reply-To: <4ADCEE6D.6050008@agilent.com>
On Tue, Oct 20, 2009 at 6:55 AM, Earl Chew <earl_chew@agilent.com> wrote:
> [ Exactly as before, but really sign off and tabs preserved ]
>
>
> This patch fixes a null pointer exception in pipe_rdwr_open() which
> generates the stack trace:
>
>
>> Unable to handle kernel NULL pointer dereference at 0000000000000028 RIP:
>> [<ffffffff802899a5>] pipe_rdwr_open+0x35/0x70
>> [<ffffffff8028125c>] __dentry_open+0x13c/0x230
>> [<ffffffff8028143d>] do_filp_open+0x2d/0x40
>> [<ffffffff802814aa>] do_sys_open+0x5a/0x100
>> [<ffffffff8021faf3>] sysenter_do_call+0x1b/0x67
>
>
> The failure mode is triggered by an attempt to open an anonymous
> pipe via /proc/pid/fd/* as exemplified by this script:
>
> =============================================================
> #!/bin/sh
> while : ; do
> { echo y ; sleep 1 ; } | { while read ; do echo z$REPLY; done ; } &
> PID=$!
> OUT=$(ps -efl | grep 'sleep 1' | grep -v grep |
> { read PID REST ; echo $PID; } )
> OUT="${OUT%% *}"
Well, you can use 'pgrep', it will save you a lot here.
Try: pgrep -f 'sleep 1' -n
> DELAY=$((RANDOM * 1000 / 32768))
> usleep $((DELAY * 1000 + RANDOM % 1000 ))
> echo n > /proc/$OUT/fd/1 # Trigger defect
> done
> =============================================================
>
This still has very little chance to trigger it, I am afraid.
I tried on my machine, didn't get any oops.
Trying to use C to write it may be better.
> Note that the failure window is quite small and I could only
> reliably reproduce the defect by inserting a small delay
> in pipe_rdwr_open(). For example:
>
> static int
> pipe_rdwr_open(struct inode *inode, struct file *filp)
> {
> msleep(100);
> mutex_lock(&inode->i_mutex);
>
>
> Although the defect was observed in pipe_rdwr_open(), I think it
> makes sense to replicate the change through all the pipe_*_open()
> functions.
>
> The core of the change is to verify that inode->i_pipe has not
> been released before attempting to manipulate it. If inode->i_pipe
> is no longer present, return ENOENT to indicate so.
>
> The comment about potentially using atomic_t for i_pipe->readers
> and i_pipe->writers has also been removed because it is no longer
> relevant in this context. The inode->i_mutex lock must be used so
> that inode->i_pipe can be dealt with correctly.
So, if I understand you correctly, you mean we have a small window
between calling sys_open() and fifo_open(), during this little period,
we don't have i_mutex held, thun another process have a chance
to release that pipe and make i_pipe NULL. Right?
Hmm, sounds reasonable. :-/
I'd like you to put the explanations into the code, as comments.
>
>
> Signed-off-by: Earl Chew <earl_chew@agilent.com>
Add some Cc, fs-devel and Al.
>
>
> --- linux-2.6.21_mvlcge500/fs/pipe.c.orig 2009-10-15 20:33:53.000000000 -0700
> +++ linux-2.6.21_mvlcge500/fs/pipe.c 2009-10-15 21:21:25.000000000 -0700
> @@ -712,36 +712,55 @@ pipe_rdwr_release(struct inode *inode, s
> static int
> pipe_read_open(struct inode *inode, struct file *filp)
> {
> - /* We could have perhaps used atomic_t, but this and friends
> - below are the only places. So it doesn't seem worthwhile. */
> + int ret = -ENOENT;
> +
> mutex_lock(&inode->i_mutex);
> - inode->i_pipe->readers++;
> +
> + if (inode->i_pipe) {
> + ret = 0;
> + inode->i_pipe->readers++;
> + }
> +
> mutex_unlock(&inode->i_mutex);
>
> - return 0;
> + return ret;
> }
>
> static int
> pipe_write_open(struct inode *inode, struct file *filp)
> {
> + int ret = -ENOENT;
> +
> mutex_lock(&inode->i_mutex);
> - inode->i_pipe->writers++;
> +
> + if (inode->i_pipe) {
> + ret = 0;
> + inode->i_pipe->writers++;
> + }
> +
> mutex_unlock(&inode->i_mutex);
>
> - return 0;
> + return ret;
> }
>
> static int
> pipe_rdwr_open(struct inode *inode, struct file *filp)
> {
> + int ret = -ENOENT;
> +
> mutex_lock(&inode->i_mutex);
> - if (filp->f_mode & FMODE_READ)
> - inode->i_pipe->readers++;
> - if (filp->f_mode & FMODE_WRITE)
> - inode->i_pipe->writers++;
> +
> + if (inode->i_pipe) {
> + ret = 0;
> + if (filp->f_mode & FMODE_READ)
> + inode->i_pipe->readers++;
> + if (filp->f_mode & FMODE_WRITE)
> + inode->i_pipe->writers++;
> + }
> +
> mutex_unlock(&inode->i_mutex);
>
> - return 0;
> + return ret;
> }
>
> /*
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
parent reply other threads:[~2009-10-21 9:38 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <4ADCEE6D.6050008@agilent.com>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2375c9f90910210238i744fec42gb4d9a1c5229696f0@mail.gmail.com \
--to=xiyou.wangcong@gmail.com \
--cc=earl_chew@agilent.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).