From: Pankaj Gupta <pagupta@redhat.com>
To: Yuval Shaia <yuval.shaia@oracle.com>
Cc: cohuck@redhat.com, jack@suse.cz, kvm@vger.kernel.org,
mst@redhat.com, jasowang@redhat.com, david@fromorbit.com,
qemu-devel@nongnu.org, virtualization@lists.linux-foundation.org,
adilger kernel <adilger.kernel@dilger.ca>,
zwisler@kernel.org, aarcange@redhat.com,
dave jiang <dave.jiang@intel.com>,
linux-nvdimm@lists.01.org,
vishal l verma <vishal.l.verma@intel.com>,
david@redhat.com, willy@infradead.org, hch@infradead.org,
linux-acpi@vger.kernel.org, jmoyer@redhat.com,
linux-ext4@vger.kernel.org, lenb@kernel.org, kilobyte@angband.pl,
riel@surriel.com, stefanha@redhat.com, imammedo@redhat.com,
dan j williams <dan.j.williams@intel.com>,
lcapitulino@redhat.com, kwolf@redhat.com, nilal@redhat.com,
tytso@mit.edu, xiaoguangrong eric <xiaoguangrong.eric@gmail.com>,
darrick wong <darrick.wong@oracle.com>,
rjw@rjwysocki.net, linux-kernel@vger.kernel.org,
linux-xfs@vger.kernel.org, linux-fsdevel@vger.kernel.org,
pbonzini@redhat.com
Subject: Re: [Qemu-devel] [PATCH v7 2/6] virtio-pmem: Add virtio pmem driver
Date: Tue, 30 Apr 2019 02:06:59 -0400 (EDT) [thread overview]
Message-ID: <3322630.24640048.1556604419234.JavaMail.zimbra@redhat.com> (raw)
In-Reply-To: <20190430055318.GA5108@lap1>
>
> On Fri, Apr 26, 2019 at 10:30:35AM +0530, Pankaj Gupta wrote:
> > This patch adds virtio-pmem driver for KVM guest.
> >
> > Guest reads the persistent memory range information from
> > Qemu over VIRTIO and registers it on nvdimm_bus. It also
> > creates a nd_region object with the persistent memory
> > range information so that existing 'nvdimm/pmem' driver
> > can reserve this into system memory map. This way
> > 'virtio-pmem' driver uses existing functionality of pmem
> > driver to register persistent memory compatible for DAX
> > capable filesystems.
> >
> > This also provides function to perform guest flush over
> > VIRTIO from 'pmem' driver when userspace performs flush
> > on DAX memory range.
> >
> > Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
> > ---
> > drivers/nvdimm/virtio_pmem.c | 114 +++++++++++++++++++++++++++++
> > drivers/virtio/Kconfig | 10 +++
> > drivers/virtio/Makefile | 1 +
> > drivers/virtio/pmem.c | 118 +++++++++++++++++++++++++++++++
> > include/linux/virtio_pmem.h | 60 ++++++++++++++++
> > include/uapi/linux/virtio_ids.h | 1 +
> > include/uapi/linux/virtio_pmem.h | 10 +++
> > 7 files changed, 314 insertions(+)
> > create mode 100644 drivers/nvdimm/virtio_pmem.c
> > create mode 100644 drivers/virtio/pmem.c
> > create mode 100644 include/linux/virtio_pmem.h
> > create mode 100644 include/uapi/linux/virtio_pmem.h
> >
> > diff --git a/drivers/nvdimm/virtio_pmem.c b/drivers/nvdimm/virtio_pmem.c
> > new file mode 100644
> > index 000000000000..66b582f751a3
> > --- /dev/null
> > +++ b/drivers/nvdimm/virtio_pmem.c
> > @@ -0,0 +1,114 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * virtio_pmem.c: Virtio pmem Driver
> > + *
> > + * Discovers persistent memory range information
> > + * from host and provides a virtio based flushing
> > + * interface.
> > + */
> > +#include <linux/virtio_pmem.h>
> > +#include "nd.h"
> > +
> > + /* The interrupt handler */
> > +void host_ack(struct virtqueue *vq)
> > +{
> > + unsigned int len;
> > + unsigned long flags;
> > + struct virtio_pmem_request *req, *req_buf;
> > + struct virtio_pmem *vpmem = vq->vdev->priv;
> > +
> > + spin_lock_irqsave(&vpmem->pmem_lock, flags);
> > + while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
> > + req->done = true;
> > + wake_up(&req->host_acked);
> > +
> > + if (!list_empty(&vpmem->req_list)) {
> > + req_buf = list_first_entry(&vpmem->req_list,
> > + struct virtio_pmem_request, list);
> > + list_del(&vpmem->req_list);
> > + req_buf->wq_buf_avail = true;
> > + wake_up(&req_buf->wq_buf);
> > + }
> > + }
> > + spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
> > +}
> > +EXPORT_SYMBOL_GPL(host_ack);
> > +
> > + /* The request submission function */
> > +int virtio_pmem_flush(struct nd_region *nd_region)
> > +{
> > + int err;
> > + unsigned long flags;
> > + struct scatterlist *sgs[2], sg, ret;
> > + struct virtio_device *vdev = nd_region->provider_data;
> > + struct virtio_pmem *vpmem = vdev->priv;
> > + struct virtio_pmem_request *req;
> > +
> > + might_sleep();
> > + req = kmalloc(sizeof(*req), GFP_KERNEL);
> > + if (!req)
> > + return -ENOMEM;
> > +
> > + req->done = req->wq_buf_avail = false;
> > + strcpy(req->name, "FLUSH");
> > + init_waitqueue_head(&req->host_acked);
> > + init_waitqueue_head(&req->wq_buf);
> > + sg_init_one(&sg, req->name, strlen(req->name));
> > + sgs[0] = &sg;
> > + sg_init_one(&ret, &req->ret, sizeof(req->ret));
> > + sgs[1] = &ret;
> > +
> > + spin_lock_irqsave(&vpmem->pmem_lock, flags);
> > + err = virtqueue_add_sgs(vpmem->req_vq, sgs, 1, 1, req, GFP_ATOMIC);
> > + if (err) {
> > + dev_err(&vdev->dev, "failed to send command to virtio pmem device\n");
> > +
> > + list_add_tail(&vpmem->req_list, &req->list);
> > + spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
> > +
> > + /* When host has read buffer, this completes via host_ack */
> > + wait_event(req->wq_buf, req->wq_buf_avail);
> > + spin_lock_irqsave(&vpmem->pmem_lock, flags);
> > + }
> > + err = virtqueue_kick(vpmem->req_vq);
> > + spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
> > +
> > + if (!err) {
> > + err = -EIO;
> > + goto ret;
> > + }
> > + /* When host has read buffer, this completes via host_ack */
> > + wait_event(req->host_acked, req->done);
> > + err = req->ret;
> > +ret:
> > + kfree(req);
> > + return err;
> > +};
> > +
> > + /* The asynchronous flush callback function */
> > +int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
> > +{
> > + int rc = 0;
> > +
> > + /* Create child bio for asynchronous flush and chain with
> > + * parent bio. Otherwise directly call nd_region flush.
> > + */
> > + if (bio && bio->bi_iter.bi_sector != -1) {
> > + struct bio *child = bio_alloc(GFP_ATOMIC, 0);
> > +
> > + if (!child)
> > + return -ENOMEM;
> > + bio_copy_dev(child, bio);
> > + child->bi_opf = REQ_PREFLUSH;
> > + child->bi_iter.bi_sector = -1;
> > + bio_chain(child, bio);
> > + submit_bio(child);
> > + } else {
> > + if (virtio_pmem_flush(nd_region))
> > + rc = -EIO;
> > + }
> > +
> > + return rc;
> > +};
> > +EXPORT_SYMBOL_GPL(async_pmem_flush);
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
> > index 35897649c24f..9f634a2ed638 100644
> > --- a/drivers/virtio/Kconfig
> > +++ b/drivers/virtio/Kconfig
> > @@ -42,6 +42,16 @@ config VIRTIO_PCI_LEGACY
> >
> > If unsure, say Y.
> >
> > +config VIRTIO_PMEM
> > + tristate "Support for virtio pmem driver"
> > + depends on VIRTIO
> > + depends on LIBNVDIMM
> > + help
> > + This driver provides support for virtio based flushing interface
> > + for persistent memory range.
> > +
> > + If unsure, say M.
> > +
> > config VIRTIO_BALLOON
> > tristate "Virtio balloon driver"
> > depends on VIRTIO
> > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > index 3a2b5c5dcf46..143ce91eabe9 100644
> > --- a/drivers/virtio/Makefile
> > +++ b/drivers/virtio/Makefile
> > @@ -6,3 +6,4 @@ virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > virtio_pci-$(CONFIG_VIRTIO_PCI_LEGACY) += virtio_pci_legacy.o
> > obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
> > obj-$(CONFIG_VIRTIO_INPUT) += virtio_input.o
> > +obj-$(CONFIG_VIRTIO_PMEM) += pmem.o ../nvdimm/virtio_pmem.o
> > diff --git a/drivers/virtio/pmem.c b/drivers/virtio/pmem.c
> > new file mode 100644
> > index 000000000000..309788628e41
> > --- /dev/null
> > +++ b/drivers/virtio/pmem.c
> > @@ -0,0 +1,118 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * virtio_pmem.c: Virtio pmem Driver
> > + *
> > + * Discovers persistent memory range information
> > + * from host and registers the virtual pmem device
> > + * with libnvdimm core.
> > + */
> > +#include <linux/virtio_pmem.h>
> > +#include <../../drivers/nvdimm/nd.h>
> > +
> > +static struct virtio_device_id id_table[] = {
> > + { VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
> > + { 0 },
> > +};
> > +
> > + /* Initialize virt queue */
> > +static int init_vq(struct virtio_pmem *vpmem)
> > +{
> > + /* single vq */
> > + vpmem->req_vq = virtio_find_single_vq(vpmem->vdev,
> > + host_ack, "flush_queue");
> > + if (IS_ERR(vpmem->req_vq))
> > + return PTR_ERR(vpmem->req_vq);
> > +
> > + spin_lock_init(&vpmem->pmem_lock);
> > + INIT_LIST_HEAD(&vpmem->req_list);
> > +
> > + return 0;
> > +};
> > +
> > +static int virtio_pmem_probe(struct virtio_device *vdev)
> > +{
> > + int err = 0;
> > + struct resource res;
> > + struct virtio_pmem *vpmem;
> > + struct nd_region_desc ndr_desc = {};
> > + int nid = dev_to_node(&vdev->dev);
> > + struct nd_region *nd_region;
> > +
> > + if (!vdev->config->get) {
> > + dev_err(&vdev->dev, "%s failure: config access disabled\n",
> > + __func__);
> > + return -EINVAL;
> > + }
> > +
> > + vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
> > + if (!vpmem) {
> > + err = -ENOMEM;
> > + goto out_err;
> > + }
> > +
> > + vpmem->vdev = vdev;
> > + vdev->priv = vpmem;
> > + err = init_vq(vpmem);
> > + if (err)
> > + goto out_err;
> > +
> > + virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> > + start, &vpmem->start);
> > + virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> > + size, &vpmem->size);
> > +
> > + res.start = vpmem->start;
> > + res.end = vpmem->start + vpmem->size-1;
> > + vpmem->nd_desc.provider_name = "virtio-pmem";
> > + vpmem->nd_desc.module = THIS_MODULE;
> > +
> > + vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
> > + &vpmem->nd_desc);
> > + if (!vpmem->nvdimm_bus)
> > + goto out_vq;
> > +
> > + dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
> > +
> > + ndr_desc.res = &res;
> > + ndr_desc.numa_node = nid;
> > + ndr_desc.flush = async_pmem_flush;
> > + set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
> > + set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
> > + nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
> > +
> > + if (!nd_region)
> > + goto out_nd;
> > + nd_region->provider_data = dev_to_virtio
>
> Delete extra space here ----------^^
ah. Sure.
> I think this will let you join the two lines.
>
> > + (nd_region->dev.parent->parent);
> > + return 0;
> > +out_nd:
> > + err = -ENXIO;
> > + nvdimm_bus_unregister(vpmem->nvdimm_bus);
> > +out_vq:
> > + vdev->config->del_vqs(vdev);
> > +out_err:
> > + dev_err(&vdev->dev, "failed to register virtio pmem memory\n");
> > + return err;
> > +}
> > +
> > +static void virtio_pmem_remove(struct virtio_device *vdev)
> > +{
> > + struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
> > +
> > + nvdimm_bus_unregister(nvdimm_bus);
> > + vdev->config->del_vqs(vdev);
> > + vdev->config->reset(vdev);
> > +}
> > +
> > +static struct virtio_driver virtio_pmem_driver = {
> > + .driver.name = KBUILD_MODNAME,
> > + .driver.owner = THIS_MODULE,
> > + .id_table = id_table,
> > + .probe = virtio_pmem_probe,
> > + .remove = virtio_pmem_remove,
> > +};
> > +
> > +module_virtio_driver(virtio_pmem_driver);
> > +MODULE_DEVICE_TABLE(virtio, id_table);
> > +MODULE_DESCRIPTION("Virtio pmem driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/include/linux/virtio_pmem.h b/include/linux/virtio_pmem.h
> > new file mode 100644
> > index 000000000000..ab1da877575d
> > --- /dev/null
> > +++ b/include/linux/virtio_pmem.h
> > @@ -0,0 +1,60 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * virtio_pmem.h: virtio pmem Driver
> > + *
> > + * Discovers persistent memory range information
> > + * from host and provides a virtio based flushing
> > + * interface.
> > + **/
> > +
> > +#ifndef _LINUX_VIRTIO_PMEM_H
> > +#define _LINUX_VIRTIO_PMEM_H
> > +
> > +#include <linux/virtio_ids.h>
> > +#include <linux/module.h>
> > +#include <linux/virtio_config.h>
> > +#include <uapi/linux/virtio_pmem.h>
> > +#include <linux/libnvdimm.h>
> > +#include <linux/spinlock.h>
> > +
> > +struct virtio_pmem_request {
> > + /* Host return status corresponding to flush request */
> > + int ret;
> > +
> > + /* command name*/
> > + char name[16];
> > +
> > + /* Wait queue to process deferred work after ack from host */
> > + wait_queue_head_t host_acked;
> > + bool done;
> > +
> > + /* Wait queue to process deferred work after virt queue buffer avail */
> > + wait_queue_head_t wq_buf;
> > + bool wq_buf_avail;
> > + struct list_head list;
> > +};
> > +
> > +struct virtio_pmem {
> > + struct virtio_device *vdev;
> > +
> > + /* Virtio pmem request queue */
> > + struct virtqueue *req_vq;
> > +
> > + /* nvdimm bus registers virtio pmem device */
> > + struct nvdimm_bus *nvdimm_bus;
> > + struct nvdimm_bus_descriptor nd_desc;
> > +
> > + /* List to store deferred work if virtqueue is full */
> > + struct list_head req_list;
> > +
> > + /* Synchronize virtqueue data */
> > + spinlock_t pmem_lock;
> > +
> > + /* Memory region information */
> > + uint64_t start;
> > + uint64_t size;
> > +};
> > +
> > +void host_ack(struct virtqueue *vq);
> > +int async_pmem_flush(struct nd_region *nd_region, struct bio *bio);
> > +#endif
> > diff --git a/include/uapi/linux/virtio_ids.h
> > b/include/uapi/linux/virtio_ids.h
> > index 6d5c3b2d4f4d..32b2f94d1f58 100644
> > --- a/include/uapi/linux/virtio_ids.h
> > +++ b/include/uapi/linux/virtio_ids.h
> > @@ -43,5 +43,6 @@
> > #define VIRTIO_ID_INPUT 18 /* virtio input */
> > #define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */
> > #define VIRTIO_ID_CRYPTO 20 /* virtio crypto */
> > +#define VIRTIO_ID_PMEM 27 /* virtio pmem */
> >
> > #endif /* _LINUX_VIRTIO_IDS_H */
> > diff --git a/include/uapi/linux/virtio_pmem.h
> > b/include/uapi/linux/virtio_pmem.h
> > new file mode 100644
> > index 000000000000..fa3f7d52717a
> > --- /dev/null
> > +++ b/include/uapi/linux/virtio_pmem.h
> > @@ -0,0 +1,10 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +
> > +#ifndef _UAPI_LINUX_VIRTIO_PMEM_H
> > +#define _UAPI_LINUX_VIRTIO_PMEM_H
> > +
> > +struct virtio_pmem_config {
> > + __le64 start;
> > + __le64 size;
> > +};
> > +#endif
>
> Suggesting to fix the above minor formatting error.
>
> With this:
>
> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Thank You!
Best regards,
Pankaj
>
> > --
> > 2.20.1
> >
> >
>
>
next prev parent reply other threads:[~2019-04-30 6:07 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-26 5:00 [PATCH v7 0/6] virtio pmem driver Pankaj Gupta
2019-04-26 5:00 ` [PATCH v7 1/6] libnvdimm: nd_region flush callback support Pankaj Gupta
2019-04-26 5:00 ` [PATCH v7 2/6] virtio-pmem: Add virtio pmem driver Pankaj Gupta
2019-04-30 5:53 ` [Qemu-devel] " Yuval Shaia
2019-04-30 6:06 ` Pankaj Gupta [this message]
2019-05-07 15:35 ` Dan Williams
2019-05-08 11:19 ` [Qemu-devel] " Pankaj Gupta
2019-05-10 23:33 ` Dan Williams
2019-05-11 1:26 ` Pankaj Gupta
2019-05-07 20:25 ` Jakub Staroń
2019-05-08 11:12 ` Pankaj Gupta
2019-05-08 15:23 ` Pankaj Gupta
2019-05-08 19:05 ` Jakub Staroń
2019-04-26 5:00 ` [PATCH v7 3/6] libnvdimm: add dax_dev sync flag Pankaj Gupta
2019-05-07 15:40 ` Dan Williams
2019-05-09 12:24 ` Pankaj Gupta
2019-04-26 5:00 ` [PATCH v7 4/6] dax: check synchronous mapping is supported Pankaj Gupta
2019-05-07 19:24 ` [Qemu-devel] " Jakub Staroń
2019-05-08 5:31 ` Pankaj Gupta
2019-04-26 5:00 ` [PATCH v7 5/6] ext4: disable map_sync for async flush Pankaj Gupta
2019-04-26 5:00 ` [PATCH v7 6/6] xfs: " Pankaj Gupta
2019-05-07 15:37 ` Dan Williams
2019-05-07 16:17 ` Darrick J. Wong
2019-05-08 5:49 ` [Qemu-devel] " Pankaj Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3322630.24640048.1556604419234.JavaMail.zimbra@redhat.com \
--to=pagupta@redhat.com \
--cc=aarcange@redhat.com \
--cc=adilger.kernel@dilger.ca \
--cc=cohuck@redhat.com \
--cc=dan.j.williams@intel.com \
--cc=darrick.wong@oracle.com \
--cc=dave.jiang@intel.com \
--cc=david@fromorbit.com \
--cc=david@redhat.com \
--cc=hch@infradead.org \
--cc=imammedo@redhat.com \
--cc=jack@suse.cz \
--cc=jasowang@redhat.com \
--cc=jmoyer@redhat.com \
--cc=kilobyte@angband.pl \
--cc=kvm@vger.kernel.org \
--cc=kwolf@redhat.com \
--cc=lcapitulino@redhat.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvdimm@lists.01.org \
--cc=linux-xfs@vger.kernel.org \
--cc=mst@redhat.com \
--cc=nilal@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=riel@surriel.com \
--cc=rjw@rjwysocki.net \
--cc=stefanha@redhat.com \
--cc=tytso@mit.edu \
--cc=virtualization@lists.linux-foundation.org \
--cc=vishal.l.verma@intel.com \
--cc=willy@infradead.org \
--cc=xiaoguangrong.eric@gmail.com \
--cc=yuval.shaia@oracle.com \
--cc=zwisler@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).