From: Carsten Otte <cotte@de.ibm.com>
To: cotte@freenet.de
Cc: linux-kernel@vger.kernel.org, linux-fsdevel@vger.kernel.org,
schwidefsky@de.ibm.com, akpm@osdl.org
Subject: [RFC/PATCH 1/5] bdev: add execute in place support
Date: Wed, 11 May 2005 16:30:08 +0200 [thread overview]
Message-ID: <428216F0.8090203@de.ibm.com> (raw)
[RFC/PATCH 1/5] bdev: add execute in place support
This patch introduces a new block device operation called direct_access.
It is used to retrieve a reference to the data on disk behind a given
sector. This reference is supposed to be cpu addressable, physical
address, and remain valid until release is called.
This patch also implements this operation for our dcssblk device driver.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
---
diff -ruN linux-2.6-git/drivers/s390/block/dcssblk.c linux-2.6-git-xip/drivers/s390/block/dcssblk.c
--- linux-2.6-git/drivers/s390/block/dcssblk.c 2005-05-10 11:17:01.000000000 +0200
+++ linux-2.6-git-xip/drivers/s390/block/dcssblk.c 2005-05-10 12:43:00.629009384 +0200
@@ -35,14 +35,17 @@
static int dcssblk_open(struct inode *inode, struct file *filp);
static int dcssblk_release(struct inode *inode, struct file *filp);
static int dcssblk_make_request(struct request_queue *q, struct bio *bio);
+static int dcssblk_direct_access(struct inode *inode, sector_t secnum,
+ unsigned long *data);
static char dcssblk_segments[DCSSBLK_PARM_LEN] = "\0";
static int dcssblk_major;
static struct block_device_operations dcssblk_devops = {
- .owner = THIS_MODULE,
- .open = dcssblk_open,
- .release = dcssblk_release,
+ .owner = THIS_MODULE,
+ .open = dcssblk_open,
+ .release = dcssblk_release,
+ .direct_access = dcssblk_direct_access,
};
static ssize_t dcssblk_add_store(struct device * dev, const char * buf,
@@ -641,6 +644,20 @@
/* Request beyond end of DCSS segment. */
goto fail;
}
+ /* verify data transfer direction */
+ if (dev_info->is_shared) {
+ switch (dev_info->segment_type) {
+ case SEG_TYPE_SR:
+ case SEG_TYPE_ER:
+ case SEG_TYPE_SC:
+ /* cannot write to these segments */
+ if (bio_data_dir(bio) == WRITE) {
+ PRINT_WARN("rejecting write to ro segment %s\n", dev_info->dev.bus_id);
+ goto fail;
+ }
+ }
+ }
+
index = (bio->bi_sector >> 3);
bio_for_each_segment(bvec, bio, i) {
page_addr = (unsigned long)
@@ -661,7 +678,26 @@
bio_endio(bio, bytes_done, 0);
return 0;
fail:
- bio_io_error(bio, bytes_done);
+ bio_io_error(bio, bio->bi_size);
+ return 0;
+}
+
+static int
+dcssblk_direct_access (struct inode *inode, sector_t secnum,
+ unsigned long *data)
+{
+ struct dcssblk_dev_info *dev_info;
+ unsigned long pgoff;
+
+ dev_info = inode->i_sb->s_bdev->bd_disk->private_data;
+ if (!dev_info)
+ return -ENODEV;
+ if (secnum % (PAGE_SIZE/512))
+ return -EINVAL;
+ pgoff = secnum / (PAGE_SIZE / 512);
+ if ((pgoff+1)*PAGE_SIZE-1 > dev_info->end - dev_info->start)
+ return -ERANGE;
+ *data = (unsigned long) (dev_info->start+pgoff*PAGE_SIZE);
return 0;
}
diff -ruN linux-2.6-git/include/linux/fs.h linux-2.6-git-xip/include/linux/fs.h
--- linux-2.6-git/include/linux/fs.h 2005-05-10 11:17:25.000000000 +0200
+++ linux-2.6-git-xip/include/linux/fs.h 2005-05-10 12:43:00.704997832 +0200
@@ -883,6 +883,7 @@
int (*open) (struct inode *, struct file *);
int (*release) (struct inode *, struct file *);
int (*ioctl) (struct inode *, struct file *, unsigned, unsigned long);
+ int (*direct_access) (struct inode *, sector_t, unsigned long *);
long (*compat_ioctl) (struct file *, unsigned, unsigned long);
int (*media_changed) (struct gendisk *);
int (*revalidate_disk) (struct gendisk *);
reply other threads:[~2005-05-11 14:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=428216F0.8090203@de.ibm.com \
--to=cotte@de.ibm.com \
--cc=akpm@osdl.org \
--cc=cotte@freenet.de \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=schwidefsky@de.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).