From: Rob Ross <rross@mcs.anl.gov>
To: Matthew Wilcox <matthew@wil.cx>
Cc: Latchesar Ionkov <lionkov@lanl.gov>, linux-fsdevel@vger.kernel.org
Subject: Re: NFSv4/pNFS possible POSIX I/O API standards
Date: Tue, 05 Dec 2006 15:55:12 -0600 [thread overview]
Message-ID: <4575EAC0.5070408@mcs.anl.gov> (raw)
In-Reply-To: <20061205173953.GQ3013@parisc-linux.org>
Matthew Wilcox wrote:
> On Tue, Dec 05, 2006 at 06:09:03PM +0100, Latchesar Ionkov wrote:
>> It could be wasteful, but it could (most likely) also be useful. Name
>> resolution is not that expensive on either side of the network. The
>> latency introduced by the single-name lookups is :)
>
> *is* latency the problem here? Last I heard, it was the intolerable
> load placed on the DLM by having clients bounce the read locks for each
> directory element all over the cluster.
I think you're both right: it's either the time spent on all the actual
lookups or the time involved in all the lock traffic, depending on FS
and network of course.
Rob
next prev parent reply other threads:[~2006-12-05 21:55 UTC|newest]
Thread overview: 124+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-28 4:34 NFSv4/pNFS possible POSIX I/O API standards Gary Grider
2006-11-28 5:54 ` Christoph Hellwig
2006-11-28 10:54 ` Andreas Dilger
2006-11-28 11:28 ` Anton Altaparmakov
2006-11-28 20:17 ` Russell Cattelan
2006-11-28 23:28 ` Wendy Cheng
2006-11-29 9:12 ` Christoph Hellwig
2006-11-29 9:04 ` Christoph Hellwig
2006-11-29 9:14 ` Christoph Hellwig
2006-11-29 9:48 ` Andreas Dilger
2006-11-29 10:18 ` Anton Altaparmakov
2006-11-29 8:26 ` Brad Boyer
2006-11-30 9:25 ` Christoph Hellwig
2006-11-30 17:49 ` Sage Weil
2006-12-01 5:26 ` Trond Myklebust
2006-12-01 7:08 ` Sage Weil
2006-12-01 14:41 ` Trond Myklebust
2006-12-01 16:47 ` Sage Weil
2006-12-01 18:07 ` Trond Myklebust
2006-12-01 18:42 ` Sage Weil
2006-12-01 19:13 ` Trond Myklebust
2006-12-01 20:32 ` Sage Weil
2006-12-04 18:02 ` Peter Staubach
2006-12-05 23:20 ` readdirplus() as possible POSIX I/O API Sage Weil
2006-12-06 15:48 ` Peter Staubach
2006-12-03 1:57 ` NFSv4/pNFS possible POSIX I/O API standards Andreas Dilger
2006-12-03 7:34 ` Kari Hurtta
2006-12-03 1:52 ` Andreas Dilger
2006-12-03 16:10 ` Sage Weil
2006-12-04 7:32 ` Andreas Dilger
2006-12-04 15:15 ` Trond Myklebust
2006-12-05 0:59 ` Rob Ross
2006-12-05 4:44 ` Gary Grider
2006-12-05 10:05 ` Christoph Hellwig
2006-12-05 5:56 ` Trond Myklebust
2006-12-05 10:07 ` Christoph Hellwig
2006-12-05 14:20 ` Matthew Wilcox
2006-12-06 15:04 ` Rob Ross
2006-12-06 15:44 ` Matthew Wilcox
2006-12-06 16:15 ` Rob Ross
2006-12-05 14:55 ` Trond Myklebust
2006-12-05 22:11 ` Rob Ross
2006-12-05 23:24 ` Trond Myklebust
2006-12-06 16:42 ` Rob Ross
2006-12-06 12:22 ` Ragnar Kjørstad
2006-12-06 15:14 ` Trond Myklebust
2006-12-05 16:55 ` Latchesar Ionkov
2006-12-05 22:12 ` Christoph Hellwig
2006-12-06 23:12 ` Latchesar Ionkov
2006-12-06 23:33 ` Trond Myklebust
2006-12-05 21:50 ` Rob Ross
2006-12-05 22:05 ` Christoph Hellwig
2006-12-05 23:18 ` Sage Weil
2006-12-05 23:55 ` Ulrich Drepper
2006-12-06 10:06 ` Andreas Dilger
2006-12-06 17:19 ` Ulrich Drepper
2006-12-06 17:27 ` Rob Ross
2006-12-06 17:42 ` Ulrich Drepper
2006-12-06 18:01 ` Ragnar Kjørstad
2006-12-06 18:13 ` Ulrich Drepper
2006-12-17 14:41 ` Ragnar Kjørstad
2006-12-17 19:07 ` Ulrich Drepper
2006-12-17 19:38 ` Matthew Wilcox
2006-12-17 21:51 ` Ulrich Drepper
2006-12-18 2:57 ` Ragnar Kjørstad
2006-12-18 3:54 ` Gary Grider
2006-12-07 5:57 ` Andreas Dilger
2006-12-15 22:37 ` Ulrich Drepper
2006-12-16 18:13 ` Andreas Dilger
2006-12-16 19:08 ` Ulrich Drepper
2006-12-14 23:58 ` statlite() Rob Ross
2006-12-07 23:39 ` NFSv4/pNFS possible POSIX I/O API standards Nikita Danilov
2006-12-05 14:37 ` Peter Staubach
2006-12-05 10:26 ` readdirplus() as possible POSIX I/O API Andreas Dilger
2006-12-05 15:23 ` Trond Myklebust
2006-12-06 10:28 ` Andreas Dilger
2006-12-06 15:10 ` Trond Myklebust
2006-12-05 17:06 ` Latchesar Ionkov
2006-12-05 22:48 ` Rob Ross
2006-11-29 10:25 ` NFSv4/pNFS possible POSIX I/O API standards Steven Whitehouse
2006-11-30 12:29 ` Christoph Hellwig
2006-12-01 15:52 ` Ric Wheeler
2006-11-29 12:23 ` Matthew Wilcox
2006-11-29 12:35 ` Matthew Wilcox
2006-11-29 16:26 ` Gary Grider
2006-11-29 17:18 ` Christoph Hellwig
2006-11-29 12:39 ` Christoph Hellwig
2006-12-01 22:29 ` Rob Ross
2006-12-02 2:35 ` Latchesar Ionkov
2006-12-05 0:37 ` Rob Ross
2006-12-05 10:02 ` Christoph Hellwig
2006-12-05 16:47 ` Latchesar Ionkov
2006-12-05 17:01 ` Matthew Wilcox
[not found] ` <f158dc670612050909m366594c5ubaa87d9a9ecc8c2a@mail.gmail.com>
2006-12-05 17:10 ` Latchesar Ionkov
2006-12-05 17:39 ` Matthew Wilcox
2006-12-05 21:55 ` Rob Ross [this message]
2006-12-05 21:50 ` Peter Staubach
2006-12-05 21:44 ` Rob Ross
2006-12-06 11:01 ` openg Christoph Hellwig
2006-12-06 15:41 ` openg Trond Myklebust
2006-12-06 15:42 ` openg Rob Ross
2006-12-06 23:32 ` openg Christoph Hellwig
2006-12-14 23:36 ` openg Rob Ross
2006-12-06 23:25 ` Re: NFSv4/pNFS possible POSIX I/O API standards Latchesar Ionkov
2006-12-06 9:48 ` David Chinner
2006-12-06 15:53 ` openg and path_to_handle Rob Ross
2006-12-06 16:04 ` Matthew Wilcox
2006-12-06 16:20 ` Rob Ross
2006-12-06 20:57 ` David Chinner
2006-12-06 20:40 ` David Chinner
2006-12-06 20:50 ` Matthew Wilcox
2006-12-06 21:09 ` David Chinner
2006-12-06 22:09 ` Andreas Dilger
2006-12-06 22:17 ` Matthew Wilcox
2006-12-06 22:41 ` Andreas Dilger
2006-12-06 23:39 ` Christoph Hellwig
2006-12-14 22:52 ` Rob Ross
2006-12-06 20:50 ` Rob Ross
2006-12-06 21:01 ` David Chinner
2006-12-06 23:19 ` Latchesar Ionkov
2006-12-14 21:00 ` Rob Ross
2006-12-14 21:20 ` Matthew Wilcox
2006-12-14 23:02 ` Rob Ross
2006-11-28 15:08 ` NFSv4/pNFS possible POSIX I/O API standards Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4575EAC0.5070408@mcs.anl.gov \
--to=rross@mcs.anl.gov \
--cc=linux-fsdevel@vger.kernel.org \
--cc=lionkov@lanl.gov \
--cc=matthew@wil.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).