From: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
To: maciej.rutecki@gmail.com
Cc: linux-kernel@vger.kernel.org, linux-fsdevel@vger.kernel.org,
linux-pm@lists.linux-foundation.org
Subject: Re: [BUG] Soft-lockup during cpu-hotplug in VFS callpaths
Date: Mon, 05 Sep 2011 14:37:55 +0530 [thread overview]
Message-ID: <4E64916B.4090205@linux.vnet.ibm.com> (raw)
In-Reply-To: <201108312040.32531.maciej.rutecki@gmail.com>
On 09/01/2011 12:10 AM, Maciej Rutecki wrote:
> On środa, 24 sierpnia 2011 o 15:44:55 Srivatsa S. Bhat wrote:
>> Hi,
>>
>> While running stressful cpu hotplug tests along with kernel compilation
>> running in background, soft-lockups are detected on multiple CPUs.
>> Sometimes this also leads to hard lockups and kernel panic.
>> All the soft-lockups seem to occur at vfsmount_lock_local_cpu() or other
>> VFS callpaths.
>>
>>
>> [37108.410813] BUG: soft lockup - CPU#5 stuck for 22s! [cc1:29669]
>> <snip>
>> [37108.694781] Call Trace:
>> [37108.697306] [<ffffffff81199e70>] ?
>> vfsmount_lock_local_lock_cpu+0x70/0x70 [37108.704258]
>> [<ffffffff81187cb5>] path_init+0x315/0x400
>> [37108.709558] [<ffffffff8127c398>] ? __raw_spin_lock_init+0x38/0x70
>> [37108.715812] [<ffffffff8118961c>] path_openat+0x8c/0x3f0
>> [37108.721203] [<ffffffff81012129>] ? sched_clock+0x9/0x10
>> [37108.726597] [<ffffffff8109416d>] ? sched_clock_cpu+0xcd/0x110
>> [37108.732508] [<ffffffff810a178d>] ? trace_hardirqs_off+0xd/0x10
>> [37108.738498] [<ffffffff8109421f>] ? local_clock+0x6f/0x80
>> [37108.743970] [<ffffffff81189a99>] do_filp_open+0x49/0xa0
>> [37108.749362] [<ffffffff811982f3>] ? alloc_fd+0xc3/0x210
>> [37108.754665] [<ffffffff8152584b>] ? _raw_spin_unlock+0x2b/0x40
>> [37108.760575] [<ffffffff811982f3>] ? alloc_fd+0xc3/0x210
>> [37108.765875] [<ffffffff81179607>] do_sys_open+0x107/0x1e0
>> [37108.771352] [<ffffffff810d610f>] ? audit_syscall_entry+0x1bf/0x1f0
>> [37108.777695] [<ffffffff81179720>] sys_open+0x20/0x30
>> [37108.782741] [<ffffffff8152e202>] system_call_fastpath+0x16/0x1b
>>
>> Kernel version: 3.0.1, 3.0.3
>> Hardware: Dual socket quad-core hyper-threaded Intel x86 machine
>> Scenario:
>> (a) Stressful cpu hotplug tests + kernel compilation
>>
>> (b) IRQ balancing had been disabled and all the IRQs were made to be
>> routed to CPU 0 (except the ones that couldn't be routed).
>>
>> (c) Lockdep was enabled during kernel configuration.
>>
>> Steps (b) and (c) were done to dig deeper into the issue. However the same
>> issue was observed by just doing step (a).
>>
>> Definitely there seems to be a race condition occurring here, because this
>> issue is hit after sometime, after starting the tests. And the time it
>> takes to hit the issue increases as we increase the number of debug print
>> statements. In some cases (especially when the number of debug print
>> statements were quite high), the stress on the machine had to be increased
>> in order to hit the issue within measurable time. In my tests, a maximum
>> of about 2 to 2.5 hours was sufficient, to hit this bug.
>>
>> Please find the console log attached with this mail.
>>
>> Any ideas on how to go about fixing this bug?
>
> It is a regression?
Hi Maciej,
Thank you for taking a look.
Yes, it seems to be a regression. I tested out kernel 2.6.39.3 with similar test cases
for quite a long time, and it did not hit any soft-lockup issues.
--
Regards,
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Linux Technology Center,
IBM India Systems and Technology Lab
--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2011-09-05 9:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-24 13:44 [BUG] Soft-lockup during cpu-hotplug in VFS callpaths Srivatsa S. Bhat
2011-08-24 23:02 ` Andrew Morton
2011-08-31 18:40 ` Maciej Rutecki
2011-09-05 9:07 ` Srivatsa S. Bhat [this message]
2011-09-05 19:18 ` Maciej Rutecki
2011-09-06 5:03 ` Srivatsa S. Bhat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E64916B.4090205@linux.vnet.ibm.com \
--to=srivatsa.bhat@linux.vnet.ibm.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=maciej.rutecki@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).