linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gabriel Krisman Bertazi <gabriel@krisman.be>
To: Amir Goldstein <amir73il@gmail.com>
Cc: Jan Kara <jack@suse.cz>,  Jan Stancek <jstancek@redhat.com>,
	 Christian Brauner <brauner@kernel.org>,  Ted Tso <tytso@mit.edu>,
	linux-fsdevel@vger.kernel.org,  linux-ext4@vger.kernel.org,
	ltp@lists.linux.it,  Gabriel Krisman Bertazi <gabriel@krisman.be>
Subject: Re: [LTP] [PATCH] ext4: don't set SB_RDONLY after filesystem errors
Date: Fri, 04 Oct 2024 15:33:56 -0400	[thread overview]
Message-ID: <877canu0gr.fsf@mailhost.krisman.be> (raw)
In-Reply-To: <CAOQ4uxjXE7Tyz39wLUcuSTijy37vgUjYxvGL21E32cxStAgQpQ@mail.gmail.com> (Amir Goldstein's message of "Fri, 4 Oct 2024 14:32:07 +0200")

Amir Goldstein <amir73il@gmail.com> writes:

> On Mon, Sep 30, 2024 at 1:34 PM Jan Kara <jack@suse.cz> wrote:
>>
>> On Mon 30-09-24 12:15:11, Jan Stancek wrote:
>> > On Mon, Aug 05, 2024 at 10:12:41PM +0200, Jan Kara wrote:
>> > > When the filesystem is mounted with errors=remount-ro, we were setting
>> > > SB_RDONLY flag to stop all filesystem modifications. We knew this misses
>> > > proper locking (sb->s_umount) and does not go through proper filesystem
>> > > remount procedure but it has been the way this worked since early ext2
>> > > days and it was good enough for catastrophic situation damage
>> > > mitigation. Recently, syzbot has found a way (see link) to trigger
>> > > warnings in filesystem freezing because the code got confused by
>> > > SB_RDONLY changing under its hands. Since these days we set
>> > > EXT4_FLAGS_SHUTDOWN on the superblock which is enough to stop all
>> > > filesystem modifications, modifying SB_RDONLY shouldn't be needed. So
>> > > stop doing that.
>> > >
>> > > Link: https://lore.kernel.org/all/000000000000b90a8e061e21d12f@google.com
>> > > Reported-by: Christian Brauner <brauner@kernel.org>
>> > > Signed-off-by: Jan Kara <jack@suse.cz>
>> > > ---
>> > > fs/ext4/super.c | 9 +++++----
>> > > 1 file changed, 5 insertions(+), 4 deletions(-)
>> > >
>> > > Note that this patch introduces fstests failure with generic/459 test because
>> > > it assumes that either freezing succeeds or 'ro' is among mount options. But
>> > > we fail the freeze with EFSCORRUPTED. This needs fixing in the test but at this
>> > > point I'm not sure how exactly.
>> > >
>> > > diff --git a/fs/ext4/super.c b/fs/ext4/super.c
>> > > index e72145c4ae5a..93c016b186c0 100644
>> > > --- a/fs/ext4/super.c
>> > > +++ b/fs/ext4/super.c
>> > > @@ -735,11 +735,12 @@ static void ext4_handle_error(struct super_block *sb, bool force_ro, int error,
>> > >
>> > >     ext4_msg(sb, KERN_CRIT, "Remounting filesystem read-only");
>> > >     /*
>> > > -    * Make sure updated value of ->s_mount_flags will be visible before
>> > > -    * ->s_flags update
>> > > +    * EXT4_FLAGS_SHUTDOWN was set which stops all filesystem
>> > > +    * modifications. We don't set SB_RDONLY because that requires
>> > > +    * sb->s_umount semaphore and setting it without proper remount
>> > > +    * procedure is confusing code such as freeze_super() leading to
>> > > +    * deadlocks and other problems.
>> > >      */
>> > > -   smp_wmb();
>> > > -   sb->s_flags |= SB_RDONLY;
>> >
>> > Hi,
>> >
>> > shouldn't the SB_RDONLY still be set (in __ext4_remount()) for the case
>> > when user triggers the abort with mount(.., "abort")? Because now we seem
>> > to always hit the condition that returns EROFS to user-space.
>>
>> Thanks for report! I agree returning EROFS from the mount although
>> 'aborting' succeeded is confusing and is mostly an unintended side effect
>> that after aborting the fs further changes to mount state are forbidden but
>> the testcase additionally wants to remount the fs read-only.
>
> Regardless of what is right or wrong to do in ext4, I don't think that the test
> really cares about remount read-only.
> I don't see anything in the test that requires it. Gabriel?
> If I remove MS_RDONLY from the test it works just fine.

If I recall correctly, no, there is no need for the MS_RDONLY.  We only
care about getting the event to test FS_ERROR.

Thanks,

>
> Any objection for LTP maintainers to apply this simple test fix?
>
> Thanks,
> Amir.
>
> --- a/testcases/kernel/syscalls/fanotify/fanotify22.c
> +++ b/testcases/kernel/syscalls/fanotify/fanotify22.c
> @@ -57,7 +57,7 @@ static struct fanotify_fid_t bad_link_fid;
>  static void trigger_fs_abort(void)
>  {
>         SAFE_MOUNT(tst_device->dev, MOUNT_PATH, tst_device->fs_type,
> -                  MS_REMOUNT|MS_RDONLY, "abort");
> +                  MS_REMOUNT, "abort");
>  }

-- 
Gabriel Krisman Bertazi

  parent reply	other threads:[~2024-10-04 19:34 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-05 20:12 [PATCH] ext4: don't set SB_RDONLY after filesystem errors Jan Kara
2024-08-06 10:50 ` Christian Brauner
2024-08-08 16:16 ` Jan Kara
2024-08-27 12:47 ` Theodore Ts'o
2024-09-30 10:15 ` Jan Stancek
2024-09-30 11:34   ` Jan Kara
2024-10-04 12:32     ` [LTP] " Amir Goldstein
2024-10-04 12:50       ` Jan Stancek
2024-10-04 13:28         ` Amir Goldstein
2024-10-04 14:31           ` Jan Kara
2024-10-04 19:33       ` Gabriel Krisman Bertazi [this message]
2024-10-06  3:38         ` Theodore Ts'o

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=877canu0gr.fsf@mailhost.krisman.be \
    --to=gabriel@krisman.be \
    --cc=amir73il@gmail.com \
    --cc=brauner@kernel.org \
    --cc=jack@suse.cz \
    --cc=jstancek@redhat.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=ltp@lists.linux.it \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).