From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
To: Hungyu Lin <dennylin0707@gmail.com>
Cc: akpm@linux-foundation.org, brauner@kernel.org,
linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] fat: fix parent link count when replacing a sibling directory
Date: Fri, 30 Oct 2026 15:19:42 +0900 [thread overview]
Message-ID: <87ecd7soap.fsf@mail.parknet.co.jp> (raw)
In-Reply-To: <20261030060011.70237-1-dennylin0707@gmail.com>
Hungyu Lin <dennylin0707@gmail.com> writes:
> vfat_rename() and do_msdos_rename() adjust parent link counts only when
> updating the dotdot entry for a move between different parents. Replacing
> an existing empty directory in the same parent also removes a
> subdirectory, but leaves the parent's link count unchanged.
>
> For example, renaming one of two sibling directories over the other
> leaves the parent with four links instead of three. stat and ls report
> the stale count, and find -links 3 does not match the parent.
>
> Drop the parent's link count for this case after the source entry has
> been removed successfully. Leave cross-parent renames, regular files
> and the existing error paths unchanged.
>
> Share the parent link count check with rmdir through fat_dir_drop_nlink().
> Only decrement counts of at least three and report a filesystem error
> otherwise, rather than reducing a corrupted directory's count below two.
> Export the helper for the VFAT and MSDOS modules.
>
> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
> Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Looks good. Thank you!
> ---
> Changes in v3:
> - Move the parent link count check into fat_dir_drop_nlink() in the FAT
> module and export it with EXPORT_SYMBOL_GPL(), as requested by
> OGAWA Hirofumi.
> - Use the helper in all four places: the VFAT and MSDOS rmdir paths and
> the two sibling-directory replacement paths.
> - Retain Hirofumi's Acked-by from v1.
>
> Changes in v2:
> - Check the parent link count before decrementing it and report low
> counts with fat_fs_error(), matching rmdir(), as noted by Sashiko.
>
> v1: https://lore.kernel.org/r/20261028211626.26103-1-dennylin0707@gmail.com
>
> fs/fat/dir.c | 10 ++++++++++
> fs/fat/fat.h | 1 +
> fs/fat/namei_msdos.c | 9 +++------
> fs/fat/namei_vfat.c | 9 +++------
> 4 files changed, 17 insertions(+), 12 deletions(-)
>
> diff --git a/fs/fat/dir.c b/fs/fat/dir.c
> index 35bdb62944a2..0cebcaf82426 100644
> --- a/fs/fat/dir.c
> +++ b/fs/fat/dir.c
> @@ -963,6 +963,16 @@ int fat_dir_empty(struct inode *dir)
> }
> EXPORT_SYMBOL_GPL(fat_dir_empty);
>
> +void fat_dir_drop_nlink(struct inode *dir)
> +{
> + if (dir->i_nlink >= 3)
> + drop_nlink(dir);
> + else
> + fat_fs_error(dir->i_sb, "parent dir link count too low (%u)",
> + dir->i_nlink);
> +}
> +EXPORT_SYMBOL_GPL(fat_dir_drop_nlink);
> +
> /*
> * fat_subdirs counts the number of sub-directories of dir. It can be run
> * on directories being created.
> diff --git a/fs/fat/fat.h b/fs/fat/fat.h
> index 76978a268410..a8a3ca4f465b 100644
> --- a/fs/fat/fat.h
> +++ b/fs/fat/fat.h
> @@ -332,6 +332,7 @@ extern const struct file_operations fat_dir_operations;
> extern int fat_search_long(struct inode *inode, const unsigned char *name,
> int name_len, struct fat_slot_info *sinfo);
> extern int fat_dir_empty(struct inode *dir);
> +void fat_dir_drop_nlink(struct inode *dir);
> extern int fat_subdirs(struct inode *dir);
> extern int fat_scan(struct inode *dir, const unsigned char *name,
> struct fat_slot_info *sinfo);
> diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c
> index c7500c2859e0..5a43d042eb01 100644
> --- a/fs/fat/namei_msdos.c
> +++ b/fs/fat/namei_msdos.c
> @@ -333,12 +333,7 @@ static int msdos_rmdir(struct inode *dir, struct dentry *dentry)
> err = fat_remove_entries(dir, &sinfo); /* and releases bh */
> if (err)
> goto out;
> - if (dir->i_nlink >= 3)
> - drop_nlink(dir);
> - else {
> - fat_fs_error(sb, "parent dir link count too low (%u)",
> - dir->i_nlink);
> - }
> + fat_dir_drop_nlink(dir);
>
> clear_nlink(inode);
> fat_detach(inode);
> @@ -565,6 +560,8 @@ static int do_msdos_rename(struct inode *old_dir, unsigned char *old_name,
> (void)sync_inode_metadata(old_dir, 1);
>
> if (new_inode) {
> + if (is_dir && old_dir == new_dir)
> + fat_dir_drop_nlink(old_dir);
> drop_nlink(new_inode);
> if (is_dir)
> drop_nlink(new_inode);
> diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
> index ff7652bf0410..791f2d7b8509 100644
> --- a/fs/fat/namei_vfat.c
> +++ b/fs/fat/namei_vfat.c
> @@ -809,12 +809,7 @@ static int vfat_rmdir(struct inode *dir, struct dentry *dentry)
> err = fat_remove_entries(dir, &sinfo); /* and releases bh */
> if (err)
> goto out;
> - if (dir->i_nlink >= 3)
> - drop_nlink(dir);
> - else {
> - fat_fs_error(sb, "parent dir link count too low (%u)",
> - dir->i_nlink);
> - }
> + fat_dir_drop_nlink(dir);
>
> clear_nlink(inode);
> fat_truncate_time(inode, NULL, FAT_UPDATE_ATIME | FAT_UPDATE_CMTIME);
> @@ -1011,6 +1006,8 @@ static int vfat_rename(struct inode *old_dir, struct dentry *old_dentry,
> vfat_update_dir_metadata(old_dir, &ts);
>
> if (new_inode) {
> + if (is_dir && old_dir == new_dir)
> + fat_dir_drop_nlink(old_dir);
> drop_nlink(new_inode);
> if (is_dir)
> drop_nlink(new_inode);
>
> base-commit: c339f4010dea8b0d754f84ace70cd1b089878ef8
--
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
prev parent reply other threads:[~2026-10-30 6:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-30 6:00 [PATCH v3] fat: fix parent link count when replacing a sibling directory Hungyu Lin
2026-10-30 6:19 ` OGAWA Hirofumi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ecd7soap.fsf@mail.parknet.co.jp \
--to=hirofumi@mail.parknet.co.jp \
--cc=akpm@linux-foundation.org \
--cc=brauner@kernel.org \
--cc=dennylin0707@gmail.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox