Re: testing result of loop-aio patchset on ext3

["Lukáš Czerner" <lczerner@redhat.com>]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 6928 bytes --]

On Wed, 16 Jul 2014, Rui Xiang wrote:

> Date: Wed, 16 Jul 2014 17:28:10 +0800
> From: Rui Xiang <rui.xiang@huawei.com>
> To: Lukáš Czerner <lczerner@redhat.com>
> Cc: Dave Kleikamp <dave.kleikamp@oracle.com>, linux-ext4@vger.kernel.org,
>     linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
>     Li Zefan <lizefan@huawei.com>
> Subject: Re: testing result of loop-aio patchset on ext3
> 
> On 2014/7/16 15:58, Lukáš Czerner wrote:
> > On Wed, 16 Jul 2014, Rui Xiang wrote:
> > 
> >> Date: Wed, 16 Jul 2014 11:54:24 +0800
> >> From: Rui Xiang <rui.xiang@huawei.com>
> >> To: Lukáš Czerner <lczerner@redhat.com>
> >> Cc: Dave Kleikamp <dave.kleikamp@oracle.com>, linux-ext4@vger.kernel.org,
> >>     linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
> >>     Li Zefan <lizefan@huawei.com>
> >> Subject: Re: testing result of loop-aio patchset on ext3
> >>
> >> On 2014/7/14 17:51, Lukáš Czerner wrote:
> >>> On Mon, 14 Jul 2014, Rui Xiang wrote:
> >>>
> >>>> Date: Mon, 14 Jul 2014 17:34:38 +0800
> >>>> From: Rui Xiang <rui.xiang@huawei.com>
> >>>> To: Dave Kleikamp <dave.kleikamp@oracle.com>, linux-ext4@vger.kernel.org
> >>>> Cc: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
> >>>>     Li Zefan <lizefan@huawei.com>
> >>>> Subject: testing result of loop-aio patchset on ext3
> >>>>
> >>>> Hi Dave,
> >>>>
> >>>> We export a container image file as a block device via loop device, but we
> >>>> found it's very easy that the container rootfs gets corrupted due to power
> >>>> loss.
> >>>>
> >>>> Your early version of loop-aio patchset said the patchset can make loop
> >>>> mounted filesystems recoverable(lkml.org/lkml/2012/3/30/317), but we found
> >>>> it doesn't help.
> >>>>
> >>>> Both the guest fs and host fs are ext3.
> >>>>
> >>>> The loop-aio patchset is from:
> >>>> git://github.com/kleikamp/linux-shaggy.git aio_loop
> >>>>
> >>>> Steps:
> >>>> 1. dd a 10G image, mkfs.ext3,
> >>>>   # dd if=/dev/zero of=./raw_image bs=1M count=10000
> >>>>   # echo y | mkfs.ext3 raw_image
> >>>>
> >>>> 2. losetup a loop device, mount at ./test_dir
> >>>>   # losetup /dev/loop1 raw_image
> >>>>   # mount /dev/loop1 ./test_dir
> >>>>
> >>>> 3. copy fs_mark into test_dir and run
> >>>>   # ./fs_mark -d ./tmp/ -s 102400000 -n 80
> >>>>
> >>>> 4. during runing fs_mark, make systerm reboot indirectly.
> >>>>   # echo b > /proc/sysrq-trigger
> >>>>
> >>>> After systerm booted up, sometimes fsck reported raw_image fs has been damaged.
> >>>>
> >>>> # fsck.ext3 -n raw_image
> >>>> e2fsck 1.41.9 (22-Aug-2009)
> >>>> Warning: skipping journal recovery because doing a read-only filesystem check.
> >>>> raw_image contains a file system with errors, check forced.
> >>>> Pass 1: Checking inodes, blocks, and sizes
> >>>> Pass 2: Checking directory structure
> >>>> Pass 3: Checking directory connectivity
> >>>> Pass 4: Checking reference counts
> >>>> Pass 5: Checking group summary information
> >>>> Free blocks count wrong (2481348, counted=2480577).
> >>>> Fix? no
> >>>> Free inodes count wrong (640837, counted=640835).
> >>>> Fix? no
> >>>> raw_image: ********** WARNING: Filesystem still has errors **********
> >>>> raw_image: 11/640848 files (0.0% non-contiguous), 78652/2560000 blocks
> >>>
> >>> It's not damaged, this is expected result if you're using old
> >>> e2fsprogs which still treats this as an error.
> >>>
> >>> It's not an error because we only update superblock summary at
> >>> unmount time so with unclean shutdown it's likely that it does not
> >>> match the reality, but e2fsck can and will easily fix that for you.
> >>>
> >>> Please try e2fsprogs v1.42.3 or newer.
> >>>
> >>
> >> Hi Lukas,
> >>
> >> I updated e2fsprogs to v1.42.3, and user the newer fsck.ext3 to check raw_image.
> >> Exactly, the result seemed normal.
> > 
> > Now I can see that there are much more problems than before, that's
> > weird. Sorry for not making this clear, but for this kind of
> > reproducers please use the most recent e2fsprogs. Also , what is the
> > kernel version you're using in this test ?
> > 
> 
> I use the most recent e2fsprogs 1.42.11 to check, and the error info is same as
> result fscked by v1.42.3. It seems that shouldn't be the reason.
> 
> Otherwise, the kernel version in this test is stable 3.4.

In that case, this is a problem somewhere else. I'll try to
reproduce and see what I can see.

I assume you're not able to reproduce this on a real device ?

Thanks!
-Lukas

> 
> 
> Thanks!
> 
> > Thanks!
> > -Lukas
> > 
> >>
> >> Then, I continue my previous test. And after testing 35 times, "fsck -n" reported image fs
> >> had been damaged, too.
> >>
> >>  # fsck.ext3 -n image1
> >> e2fsck 1.42.3.wc1 (28-May-2012)
> >> Warning: skipping journal recovery because doing a read-only filesystem check.
> >> image1 has been mounted 36 times without being checked, check forced.
> >> Pass 1: Checking inodes, blocks, and sizes
> >> Inode 16407, i_size is 597447, should be 602112.  Fix? no
> >> Inode 16407, i_blocks is 1176, should be 1184.  Fix? no
> >> Inode 409941, i_blocks is 200208, should be 112.  Fix? no
> >> Pass 2: Checking directory structure
> >> Pass 3: Checking directory connectivity
> >> Pass 4: Checking reference counts
> >> Pass 5: Checking group summary information
> >> Block bitmap differences:  -1506836 -1506843 -(1506859--1506860) -(1660941--1661964) -(1661966--1671167) -(1671688--1686473)
> >> Fix? no
> >> Free blocks count wrong for group #2 (31558, counted=31556).
> >> Fix? no
> >> Free blocks count wrong for group #43 (15871, counted=15867).
> >> Fix? no
> >> Free blocks count wrong (2204041, counted=2204035).
> >> Fix? no
> >> image1: ********** WARNING: Filesystem still has errors **********
> >> image1: 13008/655360 files (0.3% non-contiguous), 417399/2621440 blocks
> >>
> >> I backup the image to image_bk, and then mount the image to a dir, and cat all files in the image.
> >> Steps:
> >> # dd if=image1 of=image_bk
> >> # mount image1 err_dir
> >> # find -name '*' -exec cat > /dev/null {} \;
> >>
> >> There are no issues during catting, and no err in dmesg too.
> >>
> >> *But when I umount the image1 from err_dir, The fsck result didn't show any fs corruption info.
> >>
> >> I mount image_bk to err_dir and umount it with no operation directly. The result is same to iamge1.
> >>
> >> *So, is fs in the image as a block device via loop device damaged really, or does it have some others issues? 
> >> Could you give me some opinions?
> >>
> >>
> >> Thanks.
> >>
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>