From cd4426ee0caa210bda927b2d844c19ff874bbce2 Mon Sep 17 00:00:00 2001
From: Kai Li <li.kai4@h3c.com>
Date: Tue, 3 Dec 2019 16:04:53 +0800
Subject: [PATCH] ocfs2: call journal flush to mark journal as empty after
 journal recovery when mount

If journal is dirty when mount, it will be replayed but jbd2 sb
log tail cannot be updated to mark a new start because
journal->j_flag has already been set with JBD2_ABORT first
in journal_init_common. When a new transaction is committed, it
will be recored in block 1 first(journal->j_tail is set to 1 in
journal_reset).

If emergency restart happens again before journal super block is
updated unfortunately, the new recorded trans will not be replayed
in the next mount.

This exception happens when this lun is used by only one node. If it
is used by multi-nodes, other node will replay its journal and its
journal sb block will be updated after recovery.

To fix this problem, use jbd2_journal_flush to mark journal as empty as
ocfs2_replay_journal has done.

The following jbd2 journal can be generated by touching a new file after
journal is replayed, and seq 15 is the first valid commit, but first seq
is 13 in journal super block.
logdump:
Block 0: Journal Superblock
Seq: 0   Type: 4 (JBD2_SUPERBLOCK_V2)
Blocksize: 4096   Total Blocks: 32768   First Block: 1
First Commit ID: 13   Start Log Blknum: 1
Error: 0
Feature Compat: 0
Feature Incompat: 2 block64
Feature RO compat: 0
Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36
FS Share Cnt: 1   Dynamic Superblk Blknum: 0
Per Txn Block Limit    Journal: 0    Data: 0

Block 1: Journal Commit Block
Seq: 14   Type: 2 (JBD2_COMMIT_BLOCK)

Block 2: Journal Descriptor
Seq: 15   Type: 1 (JBD2_DESCRIPTOR_BLOCK)
No. Blocknum        Flags
 0. 587             none
UUID: 00000000000000000000000000000000
 1. 8257792         JBD2_FLAG_SAME_UUID
 2. 619             JBD2_FLAG_SAME_UUID
 3. 24772864        JBD2_FLAG_SAME_UUID
 4. 8257802         JBD2_FLAG_SAME_UUID
 5. 513             JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG
...
Block 7: Inode
Inode: 8257802   Mode: 0640   Generation: 57157641 (0x3682809)
FS Generation: 2839773110 (0xa9437fb6)
CRC32: 00000000   ECC: 0000
Type: Regular   Attr: 0x0   Flags: Valid
Dynamic Features: (0x1) InlineData
User: 0 (root)   Group: 0 (root)   Size: 7
Links: 1   Clusters: 0
ctime: 0x5de5d870 0x11104c61 -- Tue Dec  3 11:37:20.286280801 2019
atime: 0x5de5d870 0x113181a1 -- Tue Dec  3 11:37:20.288457121 2019
mtime: 0x5de5d870 0x11104c61 -- Tue Dec  3 11:37:20.286280801 2019
dtime: 0x0 -- Thu Jan  1 08:00:00 1970
...
Block 9: Journal Commit Block
Seq: 15   Type: 2 (JBD2_COMMIT_BLOCK)

The following is jouranl recovery log when recovering the upper jbd2
journal when mount again.
syslog:
[ 2265.648622] ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it.
[ 2265.649695] fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0
[ 2265.650407] fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1
[ 2265.650409] fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2
[ 2265.650410] fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13

Due to first commit seq 13 recorded in journal super is not consistent
with the value recorded in block 1(seq is 14), journal recovery will be
terminated before seq 15 even though it is an unbroken commit, inode
8257802 is a new file and it will be lost.

Signed-off-by: Kai Li <li.kai4@h3c.com>
---
 fs/ocfs2/journal.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 1afe57f425a0..b8b9d26fa731 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -1066,6 +1066,14 @@ int ocfs2_journal_load(struct ocfs2_journal *journal, int local, int replayed)
 
 	ocfs2_clear_journal_error(osb->sb, journal->j_journal, osb->slot_num);
 
+	if (replayed) {
+		/* wipe the journal */
+		jbd2_journal_lock_updates(journal->j_journal);
+		status = jbd2_journal_flush(journal->j_journal);
+		jbd2_journal_unlock_updates(journal->j_journal);
+		mlog(ML_NOTICE, "journal recovery complete, status=%d", status);
+	}
+
 	status = ocfs2_journal_toggle_dirty(osb, 1, replayed);
 	if (status < 0) {
 		mlog_errno(status);
-- 
2.12.1.windows.1

