linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tomasz Figa <tomasz.figa@gmail.com>
To: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	Kukjin Kim <kgene.kim@samsung.com>,
	linux-gpio@vger.kernel.org,
	Ian Campbell <ian.campbell@citrix.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Pawel Moll <pawel.moll@arm.com>,
	Rob Herring <rob.herring@calxeda.com>,
	Russell King <linux@arm.linux.org.uk>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Mark Brown <broonie@kernel.org>,
	Tomasz Figa <tomasz.figa@gmail.com>
Subject: [PATCH v7 0/7] Initial Device Tree support for S3C64xx
Date: Wed, 21 Aug 2013 23:21:44 +0200	[thread overview]
Message-ID: <1377120111-25601-1-git-send-email-tomasz.figa@gmail.com> (raw)

This series adds Device Tree support for Samsung S3C64xx SoC series.

It fixes several problems preventing from booting an S3C64xx-based system
using Device Tree, adds all the infrastructure for Device Tree-based board
support, including mach-s3c64xx-dt and dts include files for S3C64xx SoCs,
and basic device tree source for FriendlyARM Mini6410 and SAMSUNG SMDK6410
boards.

Current support is somewhat limite, but should be fine as a start and
will be extended in future, hopefully with help of S3C64xx board
maintainers.

Depends on:
 - [PATCH v2 0/8] Common Clock Framework support for Samsung S3C64xx
   http://thread.gmane.org/gmane.linux.usb.general/90493

On Samsung S3C6410-based Mini6410 and SMDK6410 boards:

Tested-by: Tomasz Figa <tomasz.figa@gmail.com>

Changes since v6:
 - Rebased onto current for-next branch of Kgene's tree,
 - Dropped the idea of .init_platform() machine callback,
 - Added support for i2c controllers,
 - Replaced separate apb and ahb nodes with a single common soc node,
 - Updated cpus node according to CPU bindings,
 - Updated fixed rate clock nodes to use generic bindings,
 - Added support for PWM buzzer and I2C EEPROM on Mini6410 board,
 - Simplified the condition of skipping legacy GPIO initialization.

Changes since v5:
 - Rebased onto current for-next branch of Kgene's tree,
 - Added support for new Common Clock Framework based clock driver,
 - Introduced hierarchical structure of device nodes (representing
   physical AHB and APB buses),
 - Bypassed most of legacy initialization when booting with DT,
 - Used preprocessor macros in dts files to improve readabilty,
 - Added support for SMDK6410 board.

Changes since v4:
 - Rebased onto current for-next branch of Kgene's tree
 - Added support for pinctrl (driver merged through pinctrl tree)
 - Added labels to all nodes that can be overridden from board dts
 - Modified board dts to use the &label syntax to reference device nodes

Changes since v3:
 - Rebased onto current for-next branch of Kgene's tree
 - Updated timer node for next version of samsung-time patches
 - Replaced local s3c64xx_dt_init_irq with irqchip_init

Changes since v2:
 - Updated timer node for next version of samsung-time patches

Changes since v1:
 - Dropped two VIC-related patches that are no longer necessary
 - Added Device Tree-based instantation of system timers
 - Corrected VIC interrupt specifiers
 - Adjusted CPU compatible values and dropped @id

Tomasz Figa (7):
  ARM: common: vic: Parse interrupt and resume masks from device tree
  ARM: s3c64xx: Bypass legacy initialization when booting with DT
  gpio: samsung: Skip initialization if device tree is present
  ARM: s3c64xx: Add board file for boot using Device Tree
  ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
  ARM: dts: Add dts file for S3C6410-based Mini6410 board
  ARM: dts: Add dts file for S3C6410-based SMDK6410 board

 Documentation/devicetree/bindings/arm/vic.txt |   6 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/s3c6400.dtsi                |  41 ++
 arch/arm/boot/dts/s3c6410-mini6410.dts        | 228 +++++++++
 arch/arm/boot/dts/s3c6410-smdk6410.dts        | 103 ++++
 arch/arm/boot/dts/s3c6410.dtsi                |  57 +++
 arch/arm/boot/dts/s3c64xx-pinctrl.dtsi        | 687 ++++++++++++++++++++++++++
 arch/arm/boot/dts/s3c64xx.dtsi                | 199 ++++++++
 arch/arm/mach-s3c64xx/Kconfig                 |  16 +
 arch/arm/mach-s3c64xx/Makefile                |   1 +
 arch/arm/mach-s3c64xx/common.c                |  12 +
 arch/arm/mach-s3c64xx/dma.c                   |   9 +
 arch/arm/mach-s3c64xx/irq-pm.c                |   9 +
 arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c       |  85 ++++
 arch/arm/mach-s3c64xx/s3c6400.c               |   9 +
 arch/arm/mach-s3c64xx/s3c6410.c               |   9 +
 arch/arm/plat-samsung/init.c                  |  12 +-
 drivers/gpio/gpio-samsung.c                   |  34 +-
 drivers/irqchip/irq-vic.c                     |   7 +-
 19 files changed, 1497 insertions(+), 29 deletions(-)
 create mode 100644 arch/arm/boot/dts/s3c6400.dtsi
 create mode 100644 arch/arm/boot/dts/s3c6410-mini6410.dts
 create mode 100644 arch/arm/boot/dts/s3c6410-smdk6410.dts
 create mode 100644 arch/arm/boot/dts/s3c6410.dtsi
 create mode 100644 arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
 create mode 100644 arch/arm/boot/dts/s3c64xx.dtsi
 create mode 100644 arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c

-- 
1.8.3.2


             reply	other threads:[~2013-08-21 21:22 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-21 21:21 Tomasz Figa [this message]
2013-08-21 21:21 ` [PATCH v7 1/7] ARM: common: vic: Parse interrupt and resume masks from device tree Tomasz Figa
2013-08-21 23:19   ` Linus Walleij
2013-08-22  7:57     ` Tomasz Figa
2013-08-22 23:22   ` [PATCH v8 1/7] irqchip: " Tomasz Figa
2013-08-23 18:12     ` Linus Walleij
2013-08-23 22:11     ` Stephen Warren
2013-08-23 23:04       ` Tomasz Figa
2013-08-23 23:19         ` Stephen Warren
2013-08-23 23:33           ` Tomasz Figa
2013-08-24 15:25         ` Rob Herring
2013-08-24 15:31           ` Tomasz Figa
2013-08-24 16:35             ` Rob Herring
2013-08-24 16:57               ` Tomasz Figa
2013-08-23 23:54     ` [PATCH v9 " Tomasz Figa
2013-08-21 21:21 ` [PATCH v7 2/7] ARM: s3c64xx: Bypass legacy initialization when booting with DT Tomasz Figa
2013-08-21 21:21 ` [PATCH v7 3/7] gpio: samsung: Skip initialization if device tree is present Tomasz Figa
2013-08-21 23:21   ` Linus Walleij
2013-08-22  8:06     ` Tomasz Figa
2013-08-22  9:48       ` Mark Brown
2013-08-22  9:59       ` Kukjin Kim
2013-08-22 23:19         ` Tomasz Figa
2013-08-23 18:11         ` Linus Walleij
2013-08-25 17:21           ` Kukjin Kim
2013-08-22  9:45     ` Kukjin Kim
2013-08-21 21:21 ` [PATCH v7 4/7] ARM: s3c64xx: Add board file for boot using Device Tree Tomasz Figa
2013-08-21 21:21 ` [PATCH v7 5/7] ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs Tomasz Figa
2013-08-22 23:24   ` [PATCH v8 " Tomasz Figa
2013-08-23 23:56     ` [PATCH v9 " Tomasz Figa
2013-08-21 21:21 ` [PATCH v7 6/7] ARM: dts: Add dts file for S3C6410-based Mini6410 board Tomasz Figa
2013-08-21 21:21 ` [PATCH v7 7/7] ARM: dts: Add dts file for S3C6410-based SMDK6410 board Tomasz Figa
2013-08-25 17:31 ` [PATCH v7 0/7] Initial Device Tree support for S3C64xx Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1377120111-25601-1-git-send-email-tomasz.figa@gmail.com \
    --to=tomasz.figa@gmail.com \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=ian.campbell@citrix.com \
    --cc=kgene.kim@samsung.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=olof@lixom.net \
    --cc=pawel.moll@arm.com \
    --cc=rob.herring@calxeda.com \
    --cc=swarren@wwwdotorg.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).