From mboxrd@z Thu Jan  1 00:00:00 1970
From: Tomasz Figa <tomasz.figa@gmail.com>
Subject: [PATCH 2/5] gpio: samsung: Use CONFIG_ARCH_S3C64XX to
	check for S3C64xx support
Date: Sat, 28 Sep 2013 20:21:34 +0200
Message-ID: <1380392497-27406-2-git-send-email-tomasz.figa@gmail.com>
References: <1380392497-27406-1-git-send-email-tomasz.figa@gmail.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Return-path: <alsa-devel-bounces@alsa-project.org>
In-Reply-To: <1380392497-27406-1-git-send-email-tomasz.figa@gmail.com>
List-Unsubscribe: <http://mailman.alsa-project.org/mailman/options/alsa-devel>,
 <mailto:alsa-devel-request@alsa-project.org?subject=unsubscribe>
List-Archive: <http://mailman.alsa-project.org/pipermail/alsa-devel/>
List-Post: <mailto:alsa-devel@alsa-project.org>
List-Help: <mailto:alsa-devel-request@alsa-project.org?subject=help>
List-Subscribe: <http://mailman.alsa-project.org/mailman/listinfo/alsa-devel>,
 <mailto:alsa-devel-request@alsa-project.org?subject=subscribe>
Errors-To: alsa-devel-bounces@alsa-project.org
Sender: alsa-devel-bounces@alsa-project.org
To: linux-samsung-soc@vger.kernel.org
Cc: alsa-devel@alsa-project.org, Kukjin Kim <kgene.kim@samsung.com>, Russell King - ARM Linux <linux@arm.linux.org.uk>, Sylwester Nawrocki <s.nawrocki@samsung.com>, Arnd Bergmann <arnd@arndb.de>, Sangbeom Kim <sbkim73@samsung.com>, Linus Walleij <linus.walleij@linaro.org>, Takashi Iwai <tiwai@suse.de>, linux-kernel@vger.kernel.org, Liam Girdwood <lgirdwood@gmail.com>, linux-gpio@vger.kernel.org, Mark Brown <broonie@kernel.org>, Geert Uytterhoeven <geert@linux-m68k.org>, Ben Dooks <ben-linux@fluff.org>, Olof Johansson <olof@lixom.net>, Martin Schwidefsky <schwidefsky@de.ibm.com>, Mauro Carvalho Chehab <m.chehab@samsung.com>, Tomasz Figa <tomasz.figa@gmail.com>, linux-arm-kernel@lists.infradead.org, linux-media@vger.kernel.org
List-Id: linux-gpio@vger.kernel.org

Since CONFIG_PLAT_S3C64XX is going to be removed, this patch modifies
the gpio-samsung driver to use the proper way of checking for S3C64xx
support - CONFIG_ARCH_S3C64XX.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
---
 drivers/gpio/gpio-samsung.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 29b5d67..76e02b9 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -1033,7 +1033,7 @@ static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
 }
 #endif
 
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
 static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
 {
 	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
@@ -1174,7 +1174,7 @@ struct samsung_gpio_chip s3c24xx_gpios[] = {
  */
 
 static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.chip	= {
 			.base	= S3C64XX_GPA(0),
@@ -1227,7 +1227,7 @@ static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
 };
 
 static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.base	= S3C64XX_GPH_BASE + 0x4,
 		.chip	= {
@@ -1257,7 +1257,7 @@ static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
 };
 
 static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.base	= S3C64XX_GPF_BASE,
 		.config	= &samsung_gpio_cfgs[6],
-- 
1.8.3.2