[PATCH 2/2] input: adp5588-keys: get value from data out when dir is out

[Jean-Francois Dagenais <jeff.dagenais@gmail.com>]

As discussed here: http://ez.analog.com/message/35852,
the 5587 revC and 5588 revB spec sheets contain a mistake
in the GPIO_DAT_STATx register description.

According to R.Shnell at ADI, as well as my own
observations, it should read:
"GPIO data status (shows GPIO state when read for inputs)".

This commit changes the get value function accordingly.

Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
---
 drivers/input/keyboard/adp5588-keys.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index bb3b57b..5ef7fcf 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -76,8 +76,18 @@ static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
 	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
 	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
 	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
+	int val;
 
-	return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
+	mutex_lock(&kpad->gpio_lock);
+
+	if (kpad->dir[bank] & bit)
+		val = kpad->dat_out[bank];
+	else
+		val = adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return !!(val & bit);
 }
 
 static void adp5588_gpio_set_value(struct gpio_chip *chip,
-- 
1.8.5.3