From: Gary Servin <garyservin@gmail.com>
To: linus.walleij@linaro.org, gnurou@gmail.com
Cc: trivial@kernel.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org, Gary Servin <garyservin@gmail.com>
Subject: [PATCH] gpio: mcp23s08: Trivial: Fixed coding style issues
Date: Thu, 6 Mar 2014 20:25:26 -0300 [thread overview]
Message-ID: <1394148326-21556-1-git-send-email-garyservin@gmail.com> (raw)
This coding style issue was detected using the checkpatch.pl script
Signed-off-by: Gary Servin <garyservin@gmail.com>
---
drivers/gpio/gpio-mcp23s08.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index 1ac288e..e1734c1 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -173,7 +173,7 @@ static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg)
tx[0] = mcp->addr | 0x01;
tx[1] = reg;
- status = spi_write_then_read(mcp->data, tx, sizeof tx, rx, sizeof rx);
+ status = spi_write_then_read(mcp->data, tx, sizeof(tx), rx, sizeof(rx));
return (status < 0) ? status : rx[0];
}
@@ -184,7 +184,7 @@ static int mcp23s08_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
tx[0] = mcp->addr;
tx[1] = reg;
tx[2] = val;
- return spi_write_then_read(mcp->data, tx, sizeof tx, NULL, 0);
+ return spi_write_then_read(mcp->data, tx, sizeof(tx), NULL, 0);
}
static int
@@ -193,13 +193,13 @@ mcp23s08_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
u8 tx[2], *tmp;
int status;
- if ((n + reg) > sizeof mcp->cache)
+ if ((n + reg) > sizeof(mcp->cache))
return -EINVAL;
tx[0] = mcp->addr | 0x01;
tx[1] = reg;
tmp = (u8 *)vals;
- status = spi_write_then_read(mcp->data, tx, sizeof tx, tmp, n);
+ status = spi_write_then_read(mcp->data, tx, sizeof(tx), tmp, n);
if (status >= 0) {
while (n--)
vals[n] = tmp[n]; /* expand to 16bit */
@@ -214,7 +214,7 @@ static int mcp23s17_read(struct mcp23s08 *mcp, unsigned reg)
tx[0] = mcp->addr | 0x01;
tx[1] = reg << 1;
- status = spi_write_then_read(mcp->data, tx, sizeof tx, rx, sizeof rx);
+ status = spi_write_then_read(mcp->data, tx, sizeof(tx), rx, sizeof(rx));
return (status < 0) ? status : (rx[0] | (rx[1] << 8));
}
@@ -226,7 +226,7 @@ static int mcp23s17_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
tx[1] = reg << 1;
tx[2] = val;
tx[3] = val >> 8;
- return spi_write_then_read(mcp->data, tx, sizeof tx, NULL, 0);
+ return spi_write_then_read(mcp->data, tx, sizeof(tx), NULL, 0);
}
static int
@@ -235,12 +235,12 @@ mcp23s17_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
u8 tx[2];
int status;
- if ((n + reg) > sizeof mcp->cache)
+ if ((n + reg) > sizeof(mcp->cache))
return -EINVAL;
tx[0] = mcp->addr | 0x01;
tx[1] = reg << 1;
- status = spi_write_then_read(mcp->data, tx, sizeof tx,
+ status = spi_write_then_read(mcp->data, tx, sizeof(tx),
(u8 *)vals, n * 2);
if (status >= 0) {
while (n--)
@@ -567,7 +567,7 @@ static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip)
(mcp->cache[MCP_GPIO] & mask) ? "hi" : "lo",
(mcp->cache[MCP_GPPU] & mask) ? "up" : " ");
/* NOTE: ignoring the irq-related registers */
- seq_printf(s, "\n");
+ seq_puts(s, "\n");
}
done:
mutex_unlock(&mcp->lock);
@@ -789,7 +789,7 @@ static int mcp230xx_probe(struct i2c_client *client,
pullups = pdata->chip[0].pullups;
}
- mcp = kzalloc(sizeof *mcp, GFP_KERNEL);
+ mcp = kzalloc(sizeof(*mcp), GFP_KERNEL);
if (!mcp)
return -ENOMEM;
@@ -925,7 +925,7 @@ static int mcp23s08_probe(struct spi_device *spi)
base = pdata->base;
}
- data = kzalloc(sizeof *data + chips * sizeof(struct mcp23s08),
+ data = kzalloc(sizeof(*data) + chips * sizeof(struct mcp23s08),
GFP_KERNEL);
if (!data)
return -ENOMEM;
--
1.9.0
next reply other threads:[~2014-03-06 23:25 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-06 23:25 Gary Servin [this message]
2014-03-07 2:38 ` [PATCH] gpio: mcp23s08: Trivial: Fixed coding style issues Alexandre Courbot
2014-03-12 13:53 ` Linus Walleij
2014-03-12 20:16 ` Gerhard Sittig
2014-03-14 10:19 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394148326-21556-1-git-send-email-garyservin@gmail.com \
--to=garyservin@gmail.com \
--cc=gnurou@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).