From: Grygorii Strashko <grygorii.strashko@ti.com>
To: Linus Walleij <linus.walleij@linaro.org>,
santosh.shilimkar@ti.com, shc_work@mail.ru,
linux-gpio@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Alexandre Courbot <gnurou@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH 2/4] gpio: syscon: retrive syscon node and regs offsets from dt
Date: Wed, 13 Aug 2014 19:16:20 +0300 [thread overview]
Message-ID: <1407946582-20927-3-git-send-email-grygorii.strashko@ti.com> (raw)
In-Reply-To: <1407946582-20927-1-git-send-email-grygorii.strashko@ti.com>
This patch adds handling of new "gpio,syscon-dev" DT property,
which allows to specify syscon node and data/direction registers
offsets in DT.
"gpio,syscon-dev" has following format:
gpio,syscon-dev = <&syscon_dev data_reg_offset [direction_reg_offset]>;
where
- syscon_dev - phandle on syscon node
- data_reg_offset - offset of data register (in bytes)
- direction_reg_offset - offset of dirrection register (optional, in bytes)
for example:
gpio,syscon-dev = <&devctrl 0x254>;
In such way, the support of multiple Syscon GPIO devices is added.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
drivers/gpio/gpio-syscon.c | 51 +++++++++++++++++++++++++++++++++++++-------
1 file changed, 43 insertions(+), 8 deletions(-)
diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c
index 03b4699..05d528f 100644
--- a/drivers/gpio/gpio-syscon.c
+++ b/drivers/gpio/gpio-syscon.c
@@ -55,6 +55,8 @@ struct syscon_gpio_priv {
struct gpio_chip chip;
struct regmap *syscon;
const struct syscon_gpio_data *data;
+ u32 dreg_offset;
+ u32 dir_reg_offset;
};
static inline struct syscon_gpio_priv *to_syscon_gpio(struct gpio_chip *chip)
@@ -65,9 +67,11 @@ static inline struct syscon_gpio_priv *to_syscon_gpio(struct gpio_chip *chip)
static int syscon_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct syscon_gpio_priv *priv = to_syscon_gpio(chip);
- unsigned int val, offs = priv->data->dat_bit_offset + offset;
+ unsigned int val, offs;
int ret;
+ offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
+
ret = regmap_read(priv->syscon,
(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, &val);
if (ret)
@@ -79,7 +83,9 @@ static int syscon_gpio_get(struct gpio_chip *chip, unsigned offset)
static void syscon_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
{
struct syscon_gpio_priv *priv = to_syscon_gpio(chip);
- unsigned int offs = priv->data->dat_bit_offset + offset;
+ unsigned int offs;
+
+ offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
if (priv->data->set) {
priv->data->set(chip, offset, val);
@@ -97,7 +103,10 @@ static int syscon_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
struct syscon_gpio_priv *priv = to_syscon_gpio(chip);
if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) {
- unsigned int offs = priv->data->dir_bit_offset + offset;
+ unsigned int offs;
+
+ offs = priv->dir_reg_offset +
+ priv->data->dir_bit_offset + offset;
regmap_update_bits(priv->syscon,
(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
@@ -112,7 +121,10 @@ static int syscon_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int val)
struct syscon_gpio_priv *priv = to_syscon_gpio(chip);
if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) {
- unsigned int offs = priv->data->dir_bit_offset + offset;
+ unsigned int offs;
+
+ offs = priv->dir_reg_offset +
+ priv->data->dir_bit_offset + offset;
regmap_update_bits(priv->syscon,
(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
@@ -147,6 +159,8 @@ static int syscon_gpio_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
const struct of_device_id *of_id = of_match_device(syscon_gpio_ids, dev);
struct syscon_gpio_priv *priv;
+ struct device_node *np = dev->of_node;
+ int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -154,10 +168,31 @@ static int syscon_gpio_probe(struct platform_device *pdev)
priv->data = of_id->data;
- priv->syscon =
- syscon_regmap_lookup_by_compatible(priv->data->compatible);
- if (IS_ERR(priv->syscon))
- return PTR_ERR(priv->syscon);
+ if (priv->data->compatible) {
+ priv->syscon = syscon_regmap_lookup_by_compatible(
+ priv->data->compatible);
+ if (IS_ERR(priv->syscon))
+ return PTR_ERR(priv->syscon);
+ } else {
+ priv->syscon =
+ syscon_regmap_lookup_by_phandle(np, "gpio,syscon-dev");
+ if (IS_ERR(priv->syscon))
+ return PTR_ERR(priv->syscon);
+
+ ret = of_property_read_u32_index(np, "gpio,syscon-dev", 1,
+ &priv->dreg_offset);
+ if (ret)
+ dev_err(dev, "can't read the data register offset!\n");
+
+ priv->dreg_offset <<= 3;
+
+ ret = of_property_read_u32_index(np, "gpio,syscon-dev", 2,
+ &priv->dir_reg_offset);
+ if (ret)
+ dev_err(dev, "can't read the dir register offset!\n");
+
+ priv->dir_reg_offset <<= 3;
+ }
priv->chip.dev = dev;
priv->chip.owner = THIS_MODULE;
--
1.7.9.5
next prev parent reply other threads:[~2014-08-13 15:32 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-13 16:16 [PATCH 0/4] gpio: syscon: reuse for keystone 2 socs Grygorii Strashko
2014-08-13 16:16 ` [PATCH 1/4] gpio: syscon: add soc specific callback to assign output value Grygorii Strashko
2014-08-29 6:19 ` Linus Walleij
2014-09-01 14:55 ` Grygorii Strashko
2014-08-13 16:16 ` Grygorii Strashko [this message]
2014-08-13 16:16 ` [PATCH 3/4] gpio: syscon: reuse for keystone 2 socs Grygorii Strashko
2014-08-29 5:53 ` Linus Walleij
2014-08-13 16:16 ` [PATCH 4/4] ARM: dts: keystone-k2hk: add dsp gpio controllers nodes Grygorii Strashko
2014-08-13 16:06 ` Alexander Shiyan
[not found] ` <1407946582-20927-5-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
2014-08-13 16:06 ` Alexander Shiyan
[not found] ` <1407945984.545232249@f170.i.mail.ru>
2014-08-14 12:13 ` Grygorii Strashko
2014-08-14 12:12 ` Alexander Shiyan
2014-08-14 15:57 ` Grygorii Strashko
2014-08-14 15:26 ` Alexander Shiyan
2014-08-14 16:54 ` Grygorii Strashko
2014-08-21 16:23 ` [PATCH v2 0/3] gpio: syscon: reuse for keystone 2 socs Grygorii Strashko
2014-08-21 16:23 ` [PATCH v2 1/3] gpio: syscon: add soc specific callback to assign output value Grygorii Strashko
2014-08-21 16:23 ` [PATCH v2 2/3] gpio: syscon: reuse for keystone 2 socs Grygorii Strashko
2014-08-21 16:23 ` [PATCH v2 3/3] ARM: dts: keystone-k2hk: add dsp gpio controllers nodes Grygorii Strashko
[not found] ` <1408638203-8246-4-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
2014-08-21 16:47 ` Alexander Shiyan
2014-08-21 16:47 ` Alexander Shiyan
2014-08-21 16:51 ` [PATCH v2 0/3] gpio: syscon: reuse for keystone 2 socs Alexander Shiyan
[not found] ` <1408638203-8246-1-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
2014-08-21 16:51 ` Alexander Shiyan
[not found] ` <1408639874.873856101@f420.i.mail.ru>
2014-08-28 17:32 ` Grygorii Strashko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1407946582-20927-3-git-send-email-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=gnurou@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=santosh.shilimkar@ti.com \
--cc=shc_work@mail.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).