From: Linus Walleij <linus.walleij@linaro.org>
To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: linux-gpio@vger.kernel.org, Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH 4/7] pinctrl: abx500: force-convert to generic config bindings
Date: Thu, 2 Oct 2014 10:40:17 +0200 [thread overview]
Message-ID: <1412239220-22495-5-git-send-email-linus.walleij@linaro.org> (raw)
In-Reply-To: <1412239220-22495-1-git-send-email-linus.walleij@linaro.org>
This converts the ABx500 pin controller and all associated device
trees to use the standard, generic config bindings for pin controllers.
There are no such device trees deployed in the wild so this is
safe to do to set a good example.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/ste-href-ab8500.dtsi | 54 ++++++++++++++++----------------
arch/arm/boot/dts/ste-href-ab8505.dtsi | 30 +++++++++---------
drivers/pinctrl/nomadik/pinctrl-abx500.c | 4 +--
3 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi
index 8be3c471d097..9b69bce9297d 100644
--- a/arch/arm/boot/dts/ste-href-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -51,7 +51,7 @@
groups = "gpio2_a_1";
};
default_cfg {
- ste,pins = "GPIO2_T9";
+ pins = "GPIO2_T9";
input-enable;
bias-pull-down;
};
@@ -64,7 +64,7 @@
groups = "gpio4_a_1";
};
default_cfg {
- ste,pins = "GPIO4_W2";
+ pins = "GPIO4_W2";
input-enable;
bias-pull-down;
};
@@ -77,7 +77,7 @@
groups = "gpio10_d_1";
};
default_cfg {
- ste,pins = "GPIO10_U17";
+ pins = "GPIO10_U17";
input-enable;
bias-pull-down;
};
@@ -90,7 +90,7 @@
groups = "gpio11_d_1";
};
default_cfg {
- ste,pins = "GPIO11_AA18";
+ pins = "GPIO11_AA18";
input-enable;
bias-pull-down;
};
@@ -103,7 +103,7 @@
groups = "gpio12_d_1";
};
default_cfg {
- ste,pins = "GPIO12_U16";
+ pins = "GPIO12_U16";
input-enable;
bias-pull-down;
};
@@ -116,7 +116,7 @@
groups = "gpio13_d_1";
};
default_cfg {
- ste,pins = "GPIO13_W17";
+ pins = "GPIO13_W17";
input-enable;
bias-pull-down;
};
@@ -129,7 +129,7 @@
groups = "gpio16_a_1";
};
default_cfg {
- ste,pins = "GPIO16_F15";
+ pins = "GPIO16_F15";
input-enable;
bias-pull-down;
};
@@ -142,7 +142,7 @@
groups = "gpio24_a_1";
};
default_cfg {
- ste,pins = "GPIO24_T14";
+ pins = "GPIO24_T14";
input-enable;
bias-pull-down;
};
@@ -155,7 +155,7 @@
groups = "gpio25_a_1";
};
default_cfg {
- ste,pins = "GPIO25_R16";
+ pins = "GPIO25_R16";
input-enable;
bias-pull-down;
};
@@ -168,7 +168,7 @@
groups = "gpio36_a_1";
};
default_cfg {
- ste,pins = "GPIO36_A17";
+ pins = "GPIO36_A17";
input-enable;
bias-pull-down;
};
@@ -181,7 +181,7 @@
groups = "gpio37_a_1";
};
default_cfg {
- ste,pins = "GPIO37_E15";
+ pins = "GPIO37_E15";
input-enable;
bias-pull-down;
};
@@ -194,7 +194,7 @@
groups = "gpio38_a_1";
};
default_cfg {
- ste,pins = "GPIO38_C17";
+ pins = "GPIO38_C17";
input-enable;
bias-pull-down;
};
@@ -207,7 +207,7 @@
groups = "gpio39_a_1";
};
default_cfg {
- ste,pins = "GPIO39_E16";
+ pins = "GPIO39_E16";
input-enable;
bias-pull-down;
};
@@ -220,7 +220,7 @@
groups = "gpio42_a_1";
};
default_cfg {
- ste,pins = "GPIO42_U2";
+ pins = "GPIO42_U2";
input-enable;
bias-pull-down;
};
@@ -236,7 +236,7 @@
groups = "gpio26_d_1";
};
default_cfg {
- ste,pins = "GPIO26_M16";
+ pins = "GPIO26_M16";
output-low;
};
};
@@ -248,7 +248,7 @@
groups = "gpio35_d_1";
};
default_cfg {
- ste,pins = "GPIO35_W15";
+ pins = "GPIO35_W15";
output-low;
};
};
@@ -264,7 +264,7 @@
groups = "ycbcr0123_d_1";
};
default_cfg {
- ste,pins = "GPIO6_Y18",
+ pins = "GPIO6_Y18",
"GPIO7_AA20",
"GPIO8_W18",
"GPIO9_AA19";
@@ -281,7 +281,7 @@
groups = "pwmout1_d_1", "pwmout2_d_1";
};
default_cfg {
- ste,pins = "GPIO14_F14",
+ pins = "GPIO14_F14",
"GPIO15_B17";
input-enable;
bias-pull-down;
@@ -296,7 +296,7 @@
groups = "adi1_d_1";
};
default_cfg {
- ste,pins = "GPIO17_P5",
+ pins = "GPIO17_P5",
"GPIO18_R5",
"GPIO19_U5",
"GPIO20_T5";
@@ -313,7 +313,7 @@
groups = "usbuicc_d_1";
};
default_cfg {
- ste,pins = "GPIO21_H19",
+ pins = "GPIO21_H19",
"GPIO22_G20",
"GPIO23_G19";
input-enable;
@@ -331,7 +331,7 @@
"dmic56_d_1";
};
default_cfg {
- ste,pins = "GPIO27_J6",
+ pins = "GPIO27_J6",
"GPIO28_K6",
"GPIO29_G6",
"GPIO30_H6",
@@ -349,7 +349,7 @@
groups = "extcpena_d_1";
};
default_cfg {
- ste,pins = "GPIO34_R17";
+ pins = "GPIO34_R17";
input-enable;
bias-pull-down;
};
@@ -363,7 +363,7 @@
groups = "modsclsda_d_1";
};
default_cfg {
- ste,pins = "GPIO40_T19",
+ pins = "GPIO40_T19",
"GPIO41_U19";
input-enable;
bias-pull-down;
@@ -380,7 +380,7 @@
groups = "sysclkreq2_d_1";
};
default_cfg {
- ste,pins = "GPIO1_T10";
+ pins = "GPIO1_T10";
input-enable;
bias-disable;
};
@@ -391,7 +391,7 @@
groups = "gpio1_a_1";
};
default_cfg {
- ste,pins = "GPIO1_T10";
+ pins = "GPIO1_T10";
input-enable;
bias-pull-down;
};
@@ -404,7 +404,7 @@
groups = "sysclkreq4_d_1";
};
default_cfg {
- ste,pins = "GPIO3_U9";
+ pins = "GPIO3_U9";
input-enable;
bias-disable;
};
@@ -415,7 +415,7 @@
groups = "gpio3_a_1";
};
default_cfg {
- ste,pins = "GPIO3_U9";
+ pins = "GPIO3_U9";
input-enable;
bias-pull-down;
};
diff --git a/arch/arm/boot/dts/ste-href-ab8505.dtsi b/arch/arm/boot/dts/ste-href-ab8505.dtsi
index 112053c7aa51..ccf37a9df050 100644
--- a/arch/arm/boot/dts/ste-href-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8505.dtsi
@@ -39,7 +39,7 @@
groups = "gpio2_a_1";
};
default_cfg {
- ste,pins = "GPIO2_R5";
+ pins = "GPIO2_R5";
input-enable;
bias-pull-down;
};
@@ -52,7 +52,7 @@
groups = "gpio10_d_1";
};
default_cfg {
- ste,pins = "GPIO10_B16";
+ pins = "GPIO10_B16";
input-enable;
bias-pull-down;
};
@@ -65,7 +65,7 @@
groups = "gpio11_d_1";
};
default_cfg {
- ste,pins = "GPIO11_B17";
+ pins = "GPIO11_B17";
input-enable;
bias-pull-down;
};
@@ -78,7 +78,7 @@
groups = "gpio13_d_1";
};
default_cfg {
- ste,pins = "GPIO13_D17";
+ pins = "GPIO13_D17";
input-enable;
bias-disable;
};
@@ -91,7 +91,7 @@
groups = "gpio34_a_1";
};
default_cfg {
- ste,pins = "GPIO34_H14";
+ pins = "GPIO34_H14";
input-enable;
bias-pull-down;
};
@@ -104,7 +104,7 @@
groups = "gpio50_d_1";
};
default_cfg {
- ste,pins = "GPIO50_L4";
+ pins = "GPIO50_L4";
input-enable;
bias-disable;
};
@@ -118,7 +118,7 @@
groups = "pwmout1_d_1";
};
default_cfg {
- ste,pins = "GPIO14_C16";
+ pins = "GPIO14_C16";
input-enable;
bias-pull-down;
};
@@ -132,7 +132,7 @@
groups = "adi2_d_1";
};
default_cfg {
- ste,pins = "GPIO17_P2",
+ pins = "GPIO17_P2",
"GPIO18_N3",
"GPIO19_T1",
"GPIO20_P3";
@@ -149,7 +149,7 @@
groups = "modsclsda_d_1";
};
default_cfg {
- ste,pins = "GPIO40_J15",
+ pins = "GPIO40_J15",
"GPIO41_J14";
input-enable;
bias-pull-down;
@@ -163,7 +163,7 @@
groups = "resethw_d_1";
};
default_cfg {
- ste,pins = "GPIO52_D16";
+ pins = "GPIO52_D16";
input-enable;
bias-pull-down;
};
@@ -176,7 +176,7 @@
groups = "service_d_1";
};
default_cfg {
- ste,pins = "GPIO53_D15";
+ pins = "GPIO53_D15";
input-enable;
bias-pull-down;
};
@@ -192,7 +192,7 @@
groups = "sysclkreq2_d_1";
};
default_cfg {
- ste,pins = "GPIO1_N4";
+ pins = "GPIO1_N4";
input-enable;
bias-disable;
};
@@ -203,7 +203,7 @@
groups = "gpio1_a_1";
};
default_cfg {
- ste,pins = "GPIO1_N4";
+ pins = "GPIO1_N4";
input-enable;
bias-pull-down;
};
@@ -216,7 +216,7 @@
groups = "sysclkreq4_d_1";
};
default_cfg {
- ste,pins = "GPIO3_P5";
+ pins = "GPIO3_P5";
input-enable;
bias-disable;
};
@@ -227,7 +227,7 @@
groups = "gpio3_a_1";
};
default_cfg {
- ste,pins = "GPIO3_P5";
+ pins = "GPIO3_P5";
input-enable;
bias-pull-down;
};
diff --git a/drivers/pinctrl/nomadik/pinctrl-abx500.c b/drivers/pinctrl/nomadik/pinctrl-abx500.c
index debeffcc2134..93ded6e0e21a 100644
--- a/drivers/pinctrl/nomadik/pinctrl-abx500.c
+++ b/drivers/pinctrl/nomadik/pinctrl-abx500.c
@@ -932,7 +932,7 @@ static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
const char *gpio_name;
const char *pin;
- ret = of_property_count_strings(np, "ste,pins");
+ ret = of_property_count_strings(np, "pins");
if (ret < 0)
goto exit;
@@ -942,7 +942,7 @@ static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
if (ret < 0)
goto exit;
- of_property_for_each_string(np, "ste,pins", prop, pin) {
+ of_property_for_each_string(np, "pins", prop, pin) {
gpio_name = abx500_find_pin_name(pctldev, pin);
ret = abx500_dt_add_map_configs(map, reserved_maps,
--
1.9.3
next prev parent reply other threads:[~2014-10-02 8:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-02 8:40 [PATCH 0/7] pinctrl: force-convert to generic DT bindings Linus Walleij
2014-10-02 8:40 ` [PATCH 1/7] pinctrl: nomadik: force-convert to generic mux bindings Linus Walleij
2014-10-02 8:40 ` [PATCH 2/7] pinctrl: abx500: " Linus Walleij
2014-10-02 8:40 ` [PATCH 3/7] pinctrl: nomadik: force-convert to generic config bindings Linus Walleij
2014-10-02 8:40 ` Linus Walleij [this message]
2014-10-02 8:40 ` [PATCH 5/7] pinctrl: abx500: retire phandle config mechanism Linus Walleij
2014-10-02 8:40 ` [PATCH 6/7] pinctrl: abx500: update device tree bindings Linus Walleij
2014-10-02 8:40 ` [PATCH 7/7] pinctrl: abx500: mark pin config as generic Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412239220-22495-5-git-send-email-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).