From: Zhou Wang <wangzhou.bry@gmail.com>
To: Russell King <linux@arm.linux.org.uk>,
Haojian Zhuang <haojian.zhuang@linaro.org>,
Wei Xu <xuwei5@hisilicon.com>, Olof Johansson <olof@lixom.net>,
Kevin Hilman <khilman@linaro.org>, Arnd Bergmann <arnd@arndb.de>,
Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <gnurou@gmail.com>,
liguozhu@hisilicon.com
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
atull@altera.com, sebastian.hesselbarth@gmail.com,
bigeasy@linutronix.de, jamie@jamieiles.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-gpio@vger.kernel.org, wangzhou1@hisilicon.com,
Zhou Wang <wangzhou.bry@gmail.com>
Subject: [PATCH v4 2/4] ARM: dts: hip04: add GPIO pieces
Date: Fri, 5 Dec 2014 11:38:40 +0800 [thread overview]
Message-ID: <1417750722-14027-3-git-send-email-wangzhou.bry@gmail.com> (raw)
In-Reply-To: <1417750722-14027-1-git-send-email-wangzhou.bry@gmail.com>
Hisilicon Soc hip04 has four GPIO controllers, each one has 32
GPIOs and can be configured to be an interrupt controller.The GPIO
controllers are compatible with the snps,dw-apb-gpio driver.
This patch add the corresponding device tree nodes.
A new property caller "gpio-number-forward" has been added in
dw-apb-gpio dts node to support to get base number of a GPIO
controller in increasing order.
Signed-off-by: Zhou Wang <wangzhou.bry@gmail.com>
---
arch/arm/boot/dts/hip04.dtsi | 79 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 93b6c90..811ca7b 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -263,5 +263,84 @@
interrupts = <0 372 4>;
};
+ gpio@4000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x4000000 0x1000>;
+ gpio-number-forward;
+
+ gpio0: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 389 4>;
+ };
+ };
+
+ gpio@4001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x4001000 0x1000>;
+ gpio-number-forward;
+
+ gpio1: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 390 4>;
+ };
+ };
+
+ gpio@4002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x4002000 0x1000>;
+ gpio-number-forward;
+
+ gpio2: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 391 4>;
+ };
+ };
+
+ gpio@4003000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x4003000 0x1000>;
+ gpio-number-forward;
+
+ gpio3: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 392 4>;
+ };
+ };
};
};
--
1.7.9.5
next prev parent reply other threads:[~2014-12-05 3:40 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-05 3:38 [PATCH v4 0/4] ARM: hip04: add GPIO support Zhou Wang
2014-12-05 3:38 ` [PATCH v4 1/4] ARM: hip04: add GPIO configure in hisi_defconfig Zhou Wang
2014-12-05 3:38 ` Zhou Wang [this message]
2014-12-05 3:38 ` [PATCH v4 3/4] gpio: Add find GPIO base in increasing order Zhou Wang
2014-12-10 8:51 ` Alexandre Courbot
2014-12-15 4:01 ` Zhou Wang
2014-12-17 3:09 ` Alexandre Courbot
2014-12-17 11:13 ` Zhou Wang
2015-01-14 8:13 ` Linus Walleij
2015-01-14 8:17 ` Alexandre Courbot
[not found] ` <CAAVeFuJkr9mFwJq0GdbLO7EgbffvD25bjBVdXAFZubq5Sz4MZQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-16 15:24 ` Linus Walleij
[not found] ` <CACRpkdYeiaWxPeeoJjX6BKDmnk2swKCnGgJCW6p9AZ3fdFVSpQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-18 7:04 ` Alexandre Courbot
2014-12-05 3:38 ` [PATCH v4 4/4] Documentation: dt: gpio: Add gpio-number-forward property in snps gpio binding doc Zhou Wang
2014-12-31 8:18 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417750722-14027-3-git-send-email-wangzhou.bry@gmail.com \
--to=wangzhou.bry@gmail.com \
--cc=arnd@arndb.de \
--cc=atull@altera.com \
--cc=bigeasy@linutronix.de \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gnurou@gmail.com \
--cc=haojian.zhuang@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jamie@jamieiles.com \
--cc=khilman@linaro.org \
--cc=liguozhu@hisilicon.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=wangzhou1@hisilicon.com \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).