From: Huacai Chen <chenhc@lemote.com>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>,
"Steven J. Hill" <Steven.Hill@imgtec.com>,
linux-mips@linux-mips.org, Fuxin Zhang <zhangfx@lemote.com>,
Zhangjin Wu <wuzhangjin@gmail.com>,
linux-gpio@vger.kernel.org, Huacai Chen <chenhc@lemote.com>
Subject: [PATCH V7 5/8] GPIO: Add Loongson-3A/3B GPIO driver support
Date: Fri, 23 Jan 2015 16:56:09 +0800 [thread overview]
Message-ID: <1422003369-3019-3-git-send-email-chenhc@lemote.com> (raw)
In-Reply-To: <1422003369-3019-1-git-send-email-chenhc@lemote.com>
Improve Loongson-2's GPIO driver to support Loongson-3A/3B, and update
Loongson-3's default config file.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
---
arch/mips/Kconfig | 1 +
arch/mips/configs/loongson3_defconfig | 1 +
drivers/gpio/Kconfig | 6 ++--
drivers/gpio/gpio-loongson.c | 44 ++++++++++++++++++++------------
4 files changed, 32 insertions(+), 20 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 9e0dbff..8849efb 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1236,6 +1236,7 @@ config CPU_LOONGSON3
select CPU_SUPPORTS_HUGEPAGES
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
+ select ARCH_REQUIRE_GPIOLIB
help
The Loongson 3 processor implements the MIPS64R2 instruction
set with many extensions.
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 7eabcd2..c844299 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -243,6 +243,7 @@ CONFIG_HW_RANDOM=y
CONFIG_RAW_DRIVER=m
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PIIX4=y
+CONFIG_GPIO_LOONGSON=y
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_W83627HF=m
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3ac5473..2e19f39 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -476,10 +476,10 @@ config GPIO_GRGPIO
VHDL IP core library.
config GPIO_LOONGSON
- tristate "Loongson-2 GPIO support"
- depends on CPU_LOONGSON2
+ tristate "Loongson-2/3 GPIO support"
+ depends on CPU_LOONGSON2 || CPU_LOONGSON3
help
- driver for GPIO functionality on Loongson-2F processors.
+ driver for GPIO functionality on Loongson-2F/3A/3B processors.
config GPIO_TB10X
bool
diff --git a/drivers/gpio/gpio-loongson.c b/drivers/gpio/gpio-loongson.c
index b4e69e0..ccc65a1 100644
--- a/drivers/gpio/gpio-loongson.c
+++ b/drivers/gpio/gpio-loongson.c
@@ -1,8 +1,10 @@
/*
- * STLS2F GPIO Support
+ * Loongson-2F/3A/3B GPIO Support
*
* Copyright (c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com>
* Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com>
+ * Copyright (c) 2013 Hongbing Hu <huhb@lemote.com>
+ * Copyright (c) 2014 Huacai Chen <chenhc@lemote.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -20,11 +22,19 @@
#include <linux/gpio.h>
#define STLS2F_N_GPIO 4
-#define STLS2F_GPIO_IN_OFFSET 16
+#define STLS3A_N_GPIO 16
+
+#ifdef CONFIG_CPU_LOONGSON3
+#define LOONGSON_N_GPIO STLS3A_N_GPIO
+#else
+#define LOONGSON_N_GPIO STLS2F_N_GPIO
+#endif
+
+#define LOONGSON_GPIO_IN_OFFSET 16
static DEFINE_SPINLOCK(gpio_lock);
-static int ls2f_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+static int loongson_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
u32 temp;
u32 mask;
@@ -39,7 +49,7 @@ static int ls2f_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
return 0;
}
-static int ls2f_gpio_direction_output(struct gpio_chip *chip,
+static int loongson_gpio_direction_output(struct gpio_chip *chip,
unsigned gpio, int level)
{
u32 temp;
@@ -56,12 +66,12 @@ static int ls2f_gpio_direction_output(struct gpio_chip *chip,
return 0;
}
-static int ls2f_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+static int loongson_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
{
u32 val;
u32 mask;
- mask = 1 << (gpio + STLS2F_GPIO_IN_OFFSET);
+ mask = 1 << (gpio + LOONGSON_GPIO_IN_OFFSET);
spin_lock(&gpio_lock);
val = LOONGSON_GPIODATA;
spin_unlock(&gpio_lock);
@@ -69,7 +79,7 @@ static int ls2f_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
return (val & mask) != 0;
}
-static void ls2f_gpio_set_value(struct gpio_chip *chip,
+static void loongson_gpio_set_value(struct gpio_chip *chip,
unsigned gpio, int value)
{
u32 val;
@@ -87,19 +97,19 @@ static void ls2f_gpio_set_value(struct gpio_chip *chip,
spin_unlock(&gpio_lock);
}
-static struct gpio_chip ls2f_chip = {
- .label = "ls2f",
- .direction_input = ls2f_gpio_direction_input,
- .get = ls2f_gpio_get_value,
- .direction_output = ls2f_gpio_direction_output,
- .set = ls2f_gpio_set_value,
+static struct gpio_chip loongson_chip = {
+ .label = "Loongson-gpio-chip",
+ .direction_input = loongson_gpio_direction_input,
+ .get = loongson_gpio_get_value,
+ .direction_output = loongson_gpio_direction_output,
+ .set = loongson_gpio_set_value,
.base = 0,
- .ngpio = STLS2F_N_GPIO,
+ .ngpio = LOONGSON_N_GPIO,
.can_sleep = false,
};
-static int __init ls2f_gpio_setup(void)
+static int __init loongson_gpio_setup(void)
{
- return gpiochip_add(&ls2f_chip);
+ return gpiochip_add(&loongson_chip);
}
-arch_initcall(ls2f_gpio_setup);
+postcore_initcall(loongson_gpio_setup);
--
1.7.7.3
next prev parent reply other threads:[~2015-01-23 8:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-23 8:56 [PATCH V7 3/8] MIPS: Cleanup Loongson-2F's gpio driver Huacai Chen
2015-01-23 8:56 ` [PATCH V7 4/8] MIPS: Move Loongson GPIO driver to drivers/gpio Huacai Chen
2015-02-26 9:29 ` Alexandre Courbot
2015-01-23 8:56 ` Huacai Chen [this message]
2015-02-26 9:28 ` [PATCH V7 3/8] MIPS: Cleanup Loongson-2F's gpio driver Alexandre Courbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422003369-3019-3-git-send-email-chenhc@lemote.com \
--to=chenhc@lemote.com \
--cc=Steven.Hill@imgtec.com \
--cc=john@phrozen.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=wuzhangjin@gmail.com \
--cc=zhangfx@lemote.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).