linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
To: Linus Walleij
	<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	Grant Likely
	<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Christian Daudt <bcm-xK7y4jjYLqYh9ZMKESR00Q@public.gmane.org>,
	Matt Porter <mporter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Florian Fainelli
	<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
Cc: Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
	Dmitry Torokhov <dtor-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
	Anatol Pomazau <anatol-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Subject: [PATCH v3 2/4] pinctrl: Broadcom Cygnus pinctrl device tree binding
Date: Mon, 2 Feb 2015 18:01:32 -0800	[thread overview]
Message-ID: <1422928894-20716-3-git-send-email-rjui@broadcom.com> (raw)
In-Reply-To: <1422928894-20716-1-git-send-email-rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>

Device tree binding documentation for Broadcom Cygnus IOMUX driver

Signed-off-by: Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---
 .../bindings/pinctrl/brcm,cygnus-pinmux.txt        |  159 ++++++++++++++++++++
 1 file changed, 159 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt
new file mode 100644
index 0000000..1082b8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt
@@ -0,0 +1,159 @@
+Broadcom Cygnus IOMUX Controller
+
+The Cygnus IOMUX controller supports group based mux configuration. In
+addition, certain pins can be muxed to GPIO function individually.
+
+Required properties:
+
+- compatible:
+    Must be "brcm,cygnus-pinmux"
+
+- reg:
+    Define the base and range of the I/O address space that contains the Cygnus
+IOMUX registers
+
+Required properties in child nodes:
+
+- function:
+    The mux function to select
+
+- groups:
+    The list of groups to select with a given function
+
+Each child node represents a configuration. Client devices reference the child
+node to enable a mux configuration
+
+For more details, refer to
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+For example:
+
+	pinmux: pinmux@0x0301d0c8 {
+		compatible = "brcm,cygnus-pinmux";
+		reg = <0x0301d0c8 0x1b0>;
+
+		i2s_0: i2s_0 {
+			function = "i2s0";
+			groups = "i2s0_0_grp", "i2s0_1_grp";
+		};
+
+		i2s_1: i2s_1 {
+			function = "i2s1";
+			groups = "i2s1_0_grp", "i2s1_1_grp";
+		};
+
+		i2s_2: i2s_2 {
+			function = "i2s2";
+			groups = "i2s2_0_grp", "i2s2_1_grp", "i2s2_2_grp",
+				 "i2s2_3_grp", "i2s2_4_grp";
+		};
+
+		spi_0: spi_0 {
+			function = "spi0";
+			groups = "spi0_grp";
+		};
+	}
+
+	spi0@18028000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x18028000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_0>;
+			clocks = <&axi81_clk>;
+			clock-names = "apb_pclk";
+	};
+
+List of supported functions and groups in Cygnus:
+
+"gpio": N/A (to be removed for A0)
+
+"i2s0": "i2s0_0_grp", "i2s0_1_grp"
+
+"i2s1": "i2s1_0_grp", "i2s1_1_grp"
+
+"i2s2": "i2s2_0_grp", "i2s2_1_grp", "i2s2_2_grp", "i2s2_3_grp", "i2s2_4_grp"
+
+"spdif": "spdif_grp"
+
+"pwm0": "pwm0_grp"
+
+"pwm1": "pwm1_grp"
+
+"pwm2": "pwm2_grp"
+
+"pwm3": "pwm3_grp"
+
+"pwm4": "pwm4_grp"
+
+"pwm5": "pwm5_grp"
+
+"key": "key0_grp", "key1_grp", "key2_grp", "key3_grp", "key4_grp", "key5_grp",
+"key6_grp", "key7_grp", "key8_grp", "key9_grp", "key10_grp", "key11_grp",
+"key12_grp", "key13_grp", "key14_grp", "key15_grp"
+
+"audio_dte": "audio_dte0_grp", "audio_dte1_grp", "audio_dte2_grp", "audio_dte3_grp"
+
+"smart_card0": "smart_card0_grp", "smart_card0_fcb_grp"
+
+"smart_card1": "smart_card1_grp", "smart_card1_fcb_grp"
+
+"spi0": "spi0_grp"
+
+"spi1": "spi1_grp"
+
+"spi2": "spi2_grp"
+
+"spi3": "spi3_grp"
+
+"spi4": "spi4_0_grp", "spi4_1_grp"
+
+"spi5": "spi5_grp"
+
+"sw_led0": "sw_led0_0_grp", "sw_led0_1_grp"
+
+"sw_led1": "sw_led1_grp"
+
+"sw_led2": "sw_led2_0_grp", "sw_led2_1_grp"
+
+"d1w": "d1w_grp"
+
+"lcd": "lcd_grp"
+
+"sram": "sram_0_grp", "sram_1_grp"
+
+"uart0": "uart0_grp"
+
+"uart1": "uart1_grp", "uart1_dte_grp"
+
+"uart2": "uart2_grp"
+
+"uart3": "uart3_grp"
+
+"uart4": "uart4_grp"
+
+"qspi": "qspi_0_grp", "qspi_1_grp"
+
+"nand": "nand_grp"
+
+"sdio0": "sdio0_grp", "sdio0_cd_grp", "sdio0_mmc_grp"
+
+"sdio1": "sdio1_data_0_grp", "sdio1_data_1_grp", "sdio1_cd_grp",
+"sdio1_led_grp", "sdio1_mmc_grp"
+
+"can0": "can0_grp"
+
+"can1": "can1_grp"
+
+"cam": "cam_led_grp", "cam_0_grp", "cam_1_grp"
+
+"bsc1": "bsc1_grp"
+
+"pcie_clkreq": "pcie_clkreq_grp"
+
+"usb0_oc": "usb0_oc_grp"
+
+"usb1_oc": "usb1_oc_grp"
+
+"usb2_oc": "usb2_oc_grp"
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-02-03  2:01 UTC|newest]

Thread overview: 118+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <Ray Jui <rjui@broadcom.com>
2014-12-04 21:56 ` [PATCH 0/4] Add pinctrl support to Broadcom Cygnus SoC Ray Jui
2014-12-04 21:56   ` [PATCH 1/4] pinctrl: Broadcom Cygnus pinctrl device tree binding Ray Jui
2014-12-04 22:16     ` Belisko Marek
2014-12-04 22:35       ` Ray Jui
2014-12-04 21:56   ` [PATCH 2/4] pinctrl: cygnus: add initial pinctrl support Ray Jui
2014-12-04 21:56   ` [PATCH 3/4] ARM: mach-bcm: enable pinctrl support for Cygnus Ray Jui
2014-12-04 21:56   ` [PATCH 4/4] ARM: dts: enable pinctrl for Broadcom Cygnus Ray Jui
2014-12-05 19:51 ` [PATCH v2 0/4] Add pinctrl support to Broadcom Cygnus SoC Ray Jui
     [not found]   ` <1417809069-26510-1-git-send-email-rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-12-05 19:51     ` [PATCH v2 1/4] pinctrl: Broadcom Cygnus pinctrl device tree binding Ray Jui
2014-12-05 19:51   ` [PATCH v2 2/4] pinctrl: cygnus: add initial pinctrl support Ray Jui
2014-12-05 19:51   ` [PATCH v2 3/4] ARM: mach-bcm: enable pinctrl support for Cygnus Ray Jui
2014-12-05 19:51   ` [PATCH v2 4/4] ARM: dts: enable pinctrl for Broadcom Cygnus Ray Jui
2014-12-08  2:38 ` [PATCH v2 0/5] Add gpio support to Broadcom Cygnus SoC Ray Jui
2014-12-08  2:38   ` [PATCH v2 1/5] gpio: Cygnus: define Broadcom Cygnus GPIO binding Ray Jui
2014-12-08 11:22     ` Arnd Bergmann
2014-12-08 16:55       ` Ray Jui
2014-12-08 17:11         ` Arnd Bergmann
2014-12-08  2:38   ` [PATCH v2 2/5] gpio: Cygnus: add GPIO driver Ray Jui
2014-12-08  2:38   ` [PATCH v2 3/5] ARM: mach-bcm: Enable GPIO support for Cygnus Ray Jui
2014-12-08  2:38   ` [PATCH v2 4/5] ARM: dts: enable GPIO for Broadcom Cygnus Ray Jui
2014-12-08  2:38   ` [PATCH v2 5/5] MAINTAINERS: Entry for Cygnus GPIO driver Ray Jui
2014-12-08 18:47 ` [PATCH v3 0/5] Add gpio support to Broadcom Cygnus SoC Ray Jui
2014-12-08 18:47   ` [PATCH v2 " Ray Jui
     [not found]     ` <1418064468-8512-2-git-send-email-rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-12-08 18:48       ` Ray Jui
2014-12-08 18:47   ` [PATCH v3 1/5] gpio: Cygnus: define Broadcom Cygnus GPIO binding Ray Jui
2014-12-08 19:38     ` Arnd Bergmann
2014-12-08 19:45       ` Ray Jui
     [not found]   ` <1418064468-8512-1-git-send-email-rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-12-08 18:47     ` [PATCH v3 2/5] gpio: Cygnus: add GPIO driver Ray Jui
2014-12-08 18:47   ` [PATCH v3 3/5] ARM: mach-bcm: Enable GPIO support for Cygnus Ray Jui
2014-12-08 18:47   ` [PATCH v3 4/5] ARM: dts: enable GPIO for Broadcom Cygnus Ray Jui
2014-12-08 18:47   ` [PATCH v3 5/5] MAINTAINERS: Entry for Cygnus GPIO driver Ray Jui
2014-12-08 20:41 ` [PATCH v4 0/5] Add gpio support to Broadcom Cygnus SoC Ray Jui
2014-12-08 20:41   ` [PATCH v4 1/5] gpio: Cygnus: define Broadcom Cygnus GPIO binding Ray Jui
2014-12-08 20:41   ` [PATCH v4 2/5] gpio: Cygnus: add GPIO driver Ray Jui
2014-12-10 10:34     ` Alexandre Courbot
     [not found]       ` <CAAVeFuJ875fvEwPbnc-Eewsw4Rp7hLbv7nXWBb=OgvLwhQBVvQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-11  1:30         ` Ray Jui
2014-12-08 20:41   ` [PATCH v4 3/5] ARM: mach-bcm: Enable GPIO support for Cygnus Ray Jui
2014-12-08 20:41   ` [PATCH v4 4/5] ARM: dts: enable GPIO for Broadcom Cygnus Ray Jui
2014-12-08 20:41   ` [PATCH v4 5/5] MAINTAINERS: Entry for Cygnus GPIO driver Ray Jui
2014-12-12  0:05 ` [PATCH v5 0/3] Add gpio support to Broadcom Cygnus SoC Ray Jui
2014-12-12  0:05   ` [PATCH v5 1/3] gpio: Cygnus: define Broadcom Cygnus GPIO binding Ray Jui
2014-12-12 12:08     ` Arnd Bergmann
2014-12-12 13:05       ` Alexandre Courbot
2014-12-12 15:28         ` Arnd Bergmann
2014-12-15 21:35           ` Ray Jui
2014-12-15 21:57             ` Arnd Bergmann
2014-12-16  0:08               ` Ray Jui
2014-12-17  2:52               ` Alexandre Courbot
2015-01-13  8:01               ` Linus Walleij
2014-12-17  2:45           ` Alexandre Courbot
2014-12-17 10:26             ` Arnd Bergmann
2014-12-17 13:16               ` Alexandre Courbot
2014-12-17 10:44             ` Russell King - ARM Linux
2014-12-17 13:13               ` Alexandre Courbot
2015-01-13  8:06               ` Linus Walleij
     [not found]                 ` <CACRpkdZbGjNecrggrFr_18zjobXMBpkrSjBMAUfyfs2ZCebB0w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-13 11:41                   ` Russell King - ARM Linux
2015-01-16 10:18                     ` Linus Walleij
2014-12-12 17:17         ` Ray Jui
2014-12-12  0:05   ` [PATCH v5 2/3] gpio: Cygnus: add GPIO driver Ray Jui
2014-12-12  0:05   ` [PATCH v5 3/3] ARM: dts: enable GPIO for Broadcom Cygnus Ray Jui
     [not found] ` <Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-12-06  0:40   ` [PATCH 0/5] Add gpio support to Broadcom Cygnus SoC Ray Jui
2014-12-06  0:40     ` [PATCH 1/5] gpio: Cygnus: define Broadcom Cygnus GPIO binding Ray Jui
2015-01-13  7:57       ` Linus Walleij
2015-01-13 17:07         ` Ray Jui
2014-12-06  0:40     ` [PATCH 2/5] gpio: Cygnus: add GPIO driver Ray Jui
     [not found]       ` <1417826408-1600-3-git-send-email-rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2014-12-06  1:28         ` Joe Perches
2014-12-06  2:14           ` Ray Jui
2014-12-06  2:34             ` Joe Perches
2014-12-06  3:41               ` Ray Jui
2014-12-06  4:24                 ` Joe Perches
2014-12-08  1:34                   ` Ray Jui
2014-12-08  1:59             ` Ray Jui
2014-12-06  0:40     ` [PATCH 3/5] ARM: mach-bcm: Enable GPIO support for Cygnus Ray Jui
2014-12-06  0:40     ` [PATCH 4/5] ARM: dts: enable GPIO for Broadcom Cygnus Ray Jui
2014-12-06  0:40     ` [PATCH 5/5] MAINTAINERS: Entry for Cygnus GPIO driver Ray Jui
2014-12-16  2:18   ` [PATCH v6 0/3] Add gpio support to Broadcom Cygnus SoC Ray Jui
2014-12-16  2:18     ` [PATCH v6 1/3] gpio: Cygnus: define Broadcom Cygnus GPIO binding Ray Jui
2014-12-16  2:18     ` [PATCH v6 2/3] gpio: Cygnus: add GPIO driver Ray Jui
2015-01-13  8:53       ` Linus Walleij
2015-01-13 17:05         ` Ray Jui
2015-01-16 10:14           ` Linus Walleij
2015-01-17  0:11             ` Ray Jui
2015-01-20  9:53               ` Linus Walleij
2015-01-20 19:17                 ` Ray Jui
2014-12-16  2:18     ` [PATCH v6 3/3] ARM: dts: enable GPIO for Broadcom Cygnus Ray Jui
2014-12-16  8:56     ` [PATCH v6 0/3] Add gpio support to Broadcom Cygnus SoC Arnd Bergmann
2014-12-17  8:06     ` Alexandre Courbot
2015-02-04  2:09   ` [PATCH v4 0/4] Add pinctrl " Ray Jui
2015-02-04  2:09     ` [PATCH v4 1/4] pinctrl: bcm: consolidate Broadcom pinctrl drivers Ray Jui
     [not found]       ` <1423015801-26967-2-git-send-email-rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-03-04  9:07         ` Linus Walleij
     [not found]           ` <CACRpkdaiM+mqGg43BT1Kr-CNi8+_U4KgZM4iZocv9+ovHL5hLQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-04 17:31             ` Ray Jui
     [not found]     ` <1423015801-26967-1-git-send-email-rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-04  2:09       ` [PATCH v4 2/4] pinctrl: Broadcom Cygnus pinctrl device tree binding Ray Jui
2015-02-04  2:10     ` [PATCH v4 3/4] pinctrl: cygnus: add initial IOMUX driver support Ray Jui
2015-02-04  2:10     ` [PATCH v4 4/4] ARM: dts: enable IOMUX for Broadcom Cygnus Ray Jui
2015-02-25 19:29     ` [PATCH v4 0/4] Add pinctrl support to Broadcom Cygnus SoC Dmitry Torokhov
2015-02-03  2:01 ` [PATCH v3 " Ray Jui
2015-02-03  2:01   ` [PATCH v3 1/4] pinctrl: bcm: consolidate Broadcom pinctrl drivers Ray Jui
     [not found]   ` <1422928894-20716-1-git-send-email-rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-03  2:01     ` Ray Jui [this message]
2015-02-03  2:01   ` [PATCH v3 3/4] pinctrl: cygnus: add initial IOMUX driver support Ray Jui
2015-02-03 17:40     ` Dmitry Torokhov
2015-02-03 19:29       ` Ray Jui
2015-02-03 20:00         ` Dmitry Torokhov
2015-02-03 20:16           ` Ray Jui
2015-02-03  2:01   ` [PATCH v3 4/4] ARM: dts: enable IOMUX for Broadcom Cygnus Ray Jui
2015-02-04  1:09 ` [PATCH v7 0/4] Add gpio/pinconf support to Broadcom Cygnus SoC Ray Jui
     [not found]   ` <1423012148-22560-1-git-send-email-rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-02-04  1:09     ` [PATCH v7 1/4] pinctrl: Cygnus: define Broadcom Cygnus GPIO/PINCONF binding Ray Jui
2015-02-04  1:09     ` [PATCH v7 2/4] pinctrl: cygnus: add gpio/pinconf driver Ray Jui
2015-02-04  1:41       ` Dmitry Torokhov
2015-02-04  2:19         ` Ray Jui
2015-02-04  1:09   ` [PATCH v7 3/4] ARM: dts: enable GPIO for Broadcom Cygnus Ray Jui
2015-02-04  1:09   ` [PATCH v7 4/4] ARM: dts: cygnus: enable GPIO based hook detection Ray Jui
2015-02-04 17:20 ` [PATCH v8 0/4] Add gpio/pinconf support to Broadcom Cygnus SoC Ray Jui
2015-02-04 17:21   ` [PATCH v8 1/4] pinctrl: Cygnus: define Broadcom Cygnus GPIO/PINCONF binding Ray Jui
2015-02-04 17:21   ` [PATCH v8 2/4] pinctrl: cygnus: add gpio/pinconf driver Ray Jui
2015-02-09 19:20     ` Dmitry Torokhov
2015-02-10 21:47       ` Ray Jui
2015-02-04 17:21   ` [PATCH v8 3/4] ARM: dts: enable GPIO for Broadcom Cygnus Ray Jui
2015-02-04 17:21   ` [PATCH v8 4/4] ARM: dts: cygnus: enable GPIO based hook detection Ray Jui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422928894-20716-3-git-send-email-rjui@broadcom.com \
    --to=rjui-dy08kvg/lbpwk0htik3j/w@public.gmane.org \
    --cc=anatol-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
    --cc=bcm-xK7y4jjYLqYh9ZMKESR00Q@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dtor-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=mporter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
    --cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).