From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: lee.jones@linaro.org
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
linux.walleij@linaro.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org, cw00.choi@samsung.com,
broonie@kernel.org, rf@opensource.wolfsonmicro.com
Subject: [RESEND PATCH 1/6] mfd: arizona: Add support for WM8280/WM8281
Date: Tue, 10 Feb 2015 11:18:25 +0000 [thread overview]
Message-ID: <1423567110-4414-2-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1423567110-4414-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>
From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
This adds support for the Wolfson Microelectronics WM8280 and WM8281
codecs.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
[ Minor fixup to remove potentially uninitialised variable. ]
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
drivers/mfd/Kconfig | 5 +++--
drivers/mfd/arizona-core.c | 15 +++++++++++++--
drivers/mfd/arizona-i2c.c | 2 ++
drivers/mfd/arizona-irq.c | 1 +
drivers/mfd/arizona-spi.c | 2 ++
include/linux/mfd/arizona/core.h | 1 +
6 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 38356e3..9b5e605 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1289,10 +1289,11 @@ config MFD_WM5102
Support for Wolfson Microelectronics WM5102 low power audio SoC
config MFD_WM5110
- bool "Wolfson Microelectronics WM5110"
+ bool "Wolfson Microelectronics WM5110 and WM8280/WM8281"
depends on MFD_ARIZONA
help
- Support for Wolfson Microelectronics WM5110 low power audio SoC
+ Support for Wolfson Microelectronics WM5110 and WM8280/WM8281
+ low power audio SoC
config MFD_WM8997
bool "Wolfson Microelectronics WM8997"
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 09ba8f1..9f81998 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -567,6 +567,7 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
const struct of_device_id arizona_of_match[] = {
{ .compatible = "wlf,wm5102", .data = (void *)WM5102 },
{ .compatible = "wlf,wm5110", .data = (void *)WM5110 },
+ { .compatible = "wlf,wm8280", .data = (void *)WM8280 },
{ .compatible = "wlf,wm8997", .data = (void *)WM8997 },
{},
};
@@ -671,6 +672,7 @@ int arizona_dev_init(struct arizona *arizona)
switch (arizona->type) {
case WM5102:
case WM5110:
+ case WM8280:
case WM8997:
for (i = 0; i < ARRAY_SIZE(wm5102_core_supplies); i++)
arizona->core_supplies[i].supply
@@ -834,11 +836,19 @@ int arizona_dev_init(struct arizona *arizona)
#endif
#ifdef CONFIG_MFD_WM5110
case 0x5110:
- type_name = "WM5110";
- if (arizona->type != WM5110) {
+ switch (arizona->type) {
+ case WM5110:
+ type_name = "WM5110";
+ break;
+ case WM8280:
+ type_name = "WM8280";
+ break;
+ default:
+ type_name = "WM5110";
dev_err(arizona->dev, "WM5110 registered as %d\n",
arizona->type);
arizona->type = WM5110;
+ break;
}
apply_patch = wm5110_patch;
break;
@@ -1010,6 +1020,7 @@ int arizona_dev_init(struct arizona *arizona)
ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
break;
case WM5110:
+ case WM8280:
ret = mfd_add_devices(arizona->dev, -1, wm5110_devs,
ARRAY_SIZE(wm5110_devs), NULL, 0, NULL);
break;
diff --git a/drivers/mfd/arizona-i2c.c b/drivers/mfd/arizona-i2c.c
index 9d4156f..ff782a5d 100644
--- a/drivers/mfd/arizona-i2c.c
+++ b/drivers/mfd/arizona-i2c.c
@@ -44,6 +44,7 @@ static int arizona_i2c_probe(struct i2c_client *i2c,
#endif
#ifdef CONFIG_MFD_WM5110
case WM5110:
+ case WM8280:
regmap_config = &wm5110_i2c_regmap;
break;
#endif
@@ -87,6 +88,7 @@ static int arizona_i2c_remove(struct i2c_client *i2c)
static const struct i2c_device_id arizona_i2c_id[] = {
{ "wm5102", WM5102 },
{ "wm5110", WM5110 },
+ { "wm8280", WM8280 },
{ "wm8997", WM8997 },
{ }
};
diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index 3a3fe7c..d063b94 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -211,6 +211,7 @@ int arizona_irq_init(struct arizona *arizona)
#endif
#ifdef CONFIG_MFD_WM5110
case WM5110:
+ case WM8280:
aod = &wm5110_aod;
switch (arizona->rev) {
diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
index 8ef58bc..1e845f6 100644
--- a/drivers/mfd/arizona-spi.c
+++ b/drivers/mfd/arizona-spi.c
@@ -44,6 +44,7 @@ static int arizona_spi_probe(struct spi_device *spi)
#endif
#ifdef CONFIG_MFD_WM5110
case WM5110:
+ case WM8280:
regmap_config = &wm5110_spi_regmap;
break;
#endif
@@ -84,6 +85,7 @@ static int arizona_spi_remove(struct spi_device *spi)
static const struct spi_device_id arizona_spi_ids[] = {
{ "wm5102", WM5102 },
{ "wm5110", WM5110 },
+ { "wm8280", WM8280 },
{ },
};
MODULE_DEVICE_TABLE(spi, arizona_spi_ids);
diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h
index 910e3aa..f970105 100644
--- a/include/linux/mfd/arizona/core.h
+++ b/include/linux/mfd/arizona/core.h
@@ -24,6 +24,7 @@ enum arizona_type {
WM5102 = 1,
WM5110 = 2,
WM8997 = 3,
+ WM8280 = 4,
};
#define ARIZONA_IRQ_GP1 0
--
1.7.2.5
next prev parent reply other threads:[~2015-02-10 11:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-10 11:18 [RESEND PATCH 0/6] Add support for the WM8280 and WM8281 Charles Keepax
2015-02-10 11:18 ` Charles Keepax [this message]
2015-02-10 11:18 ` [RESEND PATCH 2/6] Documentation: devicetree: arizona: Add bindings for WM8280 Charles Keepax
2015-02-10 11:18 ` [RESEND PATCH 3/6] regulator: arizona-micsupp: Add support for WM8280/WM8281 Charles Keepax
2015-02-10 11:18 ` [RESEND PATCH 4/6] gpio: arizona: " Charles Keepax
2015-02-10 11:18 ` [RESEND PATCH 5/6] extcon: " Charles Keepax
2015-02-10 11:18 ` [RESEND PATCH 6/6] ASoC: " Charles Keepax
-- strict thread matches above, loose matches on Subject: below --
2015-01-17 15:21 [RESEND PATCH 0/6] Add support for the WM8280 and WM8281 codecs Charles Keepax
2015-01-17 15:21 ` [RESEND PATCH 1/6] mfd: arizona: Add support for WM8280/WM8281 Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423567110-4414-2-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux.walleij@linaro.org \
--cc=rf@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).