From: Huacai Chen <chenhc@lemote.com>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>,
linux-gpio@vger.kernel.org, Fuxin Zhang <zhangfx@lemote.com>,
Zhangjin Wu <wuzhangjin@gmail.com>,
Huacai Chen <chenhc@lemote.com>
Subject: [PATCH 1/3] MIPS: Cleanup Loongson-2F's gpio driver
Date: Thu, 26 Mar 2015 10:34:46 +0800 [thread overview]
Message-ID: <1427337288-8411-1-git-send-email-chenhc@lemote.com> (raw)
This cleanup is prepare to move the driver to drivers/gpio. Custom
definitions of gpio_get_value()/gpio_set_value() are dropped.
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
---
arch/mips/include/asm/mach-loongson/gpio.h | 15 +++---
arch/mips/loongson/common/gpio.c | 80 ++++++++--------------------
2 files changed, 31 insertions(+), 64 deletions(-)
diff --git a/arch/mips/include/asm/mach-loongson/gpio.h b/arch/mips/include/asm/mach-loongson/gpio.h
index 211a7b7..b3b2169 100644
--- a/arch/mips/include/asm/mach-loongson/gpio.h
+++ b/arch/mips/include/asm/mach-loongson/gpio.h
@@ -1,8 +1,9 @@
/*
- * STLS2F GPIO Support
+ * Loongson GPIO Support
*
* Copyright (c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com>
* Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com>
+ * Copyright (c) 2014 Huacai Chen <chenhc@lemote.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -10,14 +11,14 @@
* (at your option) any later version.
*/
-#ifndef __STLS2F_GPIO_H
-#define __STLS2F_GPIO_H
+#ifndef __LOONGSON_GPIO_H
+#define __LOONGSON_GPIO_H
#include <asm-generic/gpio.h>
-extern void gpio_set_value(unsigned gpio, int value);
-extern int gpio_get_value(unsigned gpio);
-extern int gpio_cansleep(unsigned gpio);
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
/* The chip can do interrupt
* but it has not been tested and doc not clear
@@ -32,4 +33,4 @@ static inline int irq_to_gpio(int gpio)
return -EINVAL;
}
-#endif /* __STLS2F_GPIO_H */
+#endif /* __LOONGSON_GPIO_H */
diff --git a/arch/mips/loongson/common/gpio.c b/arch/mips/loongson/common/gpio.c
index 29dbaa2..b4e69e0 100644
--- a/arch/mips/loongson/common/gpio.c
+++ b/arch/mips/loongson/common/gpio.c
@@ -24,63 +24,11 @@
static DEFINE_SPINLOCK(gpio_lock);
-int gpio_get_value(unsigned gpio)
-{
- u32 val;
- u32 mask;
-
- if (gpio >= STLS2F_N_GPIO)
- return __gpio_get_value(gpio);
-
- mask = 1 << (gpio + STLS2F_GPIO_IN_OFFSET);
- spin_lock(&gpio_lock);
- val = LOONGSON_GPIODATA;
- spin_unlock(&gpio_lock);
-
- return (val & mask) != 0;
-}
-EXPORT_SYMBOL(gpio_get_value);
-
-void gpio_set_value(unsigned gpio, int state)
-{
- u32 val;
- u32 mask;
-
- if (gpio >= STLS2F_N_GPIO) {
- __gpio_set_value(gpio, state);
- return ;
- }
-
- mask = 1 << gpio;
-
- spin_lock(&gpio_lock);
- val = LOONGSON_GPIODATA;
- if (state)
- val |= mask;
- else
- val &= (~mask);
- LOONGSON_GPIODATA = val;
- spin_unlock(&gpio_lock);
-}
-EXPORT_SYMBOL(gpio_set_value);
-
-int gpio_cansleep(unsigned gpio)
-{
- if (gpio < STLS2F_N_GPIO)
- return 0;
- else
- return __gpio_cansleep(gpio);
-}
-EXPORT_SYMBOL(gpio_cansleep);
-
static int ls2f_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
u32 temp;
u32 mask;
- if (gpio >= STLS2F_N_GPIO)
- return -EINVAL;
-
spin_lock(&gpio_lock);
mask = 1 << gpio;
temp = LOONGSON_GPIOIE;
@@ -97,9 +45,6 @@ static int ls2f_gpio_direction_output(struct gpio_chip *chip,
u32 temp;
u32 mask;
- if (gpio >= STLS2F_N_GPIO)
- return -EINVAL;
-
gpio_set_value(gpio, level);
spin_lock(&gpio_lock);
mask = 1 << gpio;
@@ -113,13 +58,33 @@ static int ls2f_gpio_direction_output(struct gpio_chip *chip,
static int ls2f_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
{
- return gpio_get_value(gpio);
+ u32 val;
+ u32 mask;
+
+ mask = 1 << (gpio + STLS2F_GPIO_IN_OFFSET);
+ spin_lock(&gpio_lock);
+ val = LOONGSON_GPIODATA;
+ spin_unlock(&gpio_lock);
+
+ return (val & mask) != 0;
}
static void ls2f_gpio_set_value(struct gpio_chip *chip,
unsigned gpio, int value)
{
- gpio_set_value(gpio, value);
+ u32 val;
+ u32 mask;
+
+ mask = 1 << gpio;
+
+ spin_lock(&gpio_lock);
+ val = LOONGSON_GPIODATA;
+ if (value)
+ val |= mask;
+ else
+ val &= (~mask);
+ LOONGSON_GPIODATA = val;
+ spin_unlock(&gpio_lock);
}
static struct gpio_chip ls2f_chip = {
@@ -130,6 +95,7 @@ static struct gpio_chip ls2f_chip = {
.set = ls2f_gpio_set_value,
.base = 0,
.ngpio = STLS2F_N_GPIO,
+ .can_sleep = false,
};
static int __init ls2f_gpio_setup(void)
--
1.7.7.3
next reply other threads:[~2015-03-26 2:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-26 2:34 Huacai Chen [this message]
2015-03-26 2:34 ` [PATCH 2/3] MIPS: Move Loongson GPIO driver to drivers/gpio Huacai Chen
2015-04-07 9:12 ` Linus Walleij
2015-03-26 2:34 ` [PATCH 3/3] GPIO: Add Loongson-3A/3B GPIO driver support Huacai Chen
2015-03-31 14:45 ` Alexandre Courbot
2015-04-01 1:19 ` 陈华才
2015-03-27 10:29 ` [PATCH 1/3] MIPS: Cleanup Loongson-2F's gpio driver Linus Walleij
2015-03-27 10:48 ` 陈华才
2015-04-07 9:11 ` Linus Walleij
-- strict thread matches above, loose matches on Subject: below --
2015-04-01 2:20 Huacai Chen
2015-04-01 2:41 ` Alexandre Courbot
2015-04-07 9:14 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1427337288-8411-1-git-send-email-chenhc@lemote.com \
--to=chenhc@lemote.com \
--cc=gnurou@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=wuzhangjin@gmail.com \
--cc=zhangfx@lemote.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).