From: <Frank.Li@freescale.com>
To: lznuaa@gmail.com, shawn.guo@linaro.org, linus.walleij@linaro.org,
robh+dt@kernel.org
Cc: linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, Frank Li <Frank.Li@freescale.com>
Subject: [PATCH v4 10/11] arm: dts: add imx7d-sdb support
Date: Tue, 21 Apr 2015 05:05:32 +0800 [thread overview]
Message-ID: <1429563933-3129-11-git-send-email-Frank.Li@freescale.com> (raw)
In-Reply-To: <1429563933-3129-1-git-send-email-Frank.Li@freescale.com>
From: Frank Li <Frank.Li@freescale.com>
add imx7d sdb board support
Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx7d-sdb.dts | 405 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 407 insertions(+)
create mode 100644 arch/arm/boot/dts/imx7d-sdb.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a71d3c7..e062934 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -313,6 +313,8 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-sabreauto.dtb \
imx6sx-sdb-reva.dtb \
imx6sx-sdb.dtb
+dtb-$(CONFIG_SOC_IMX7D) += \
+ imx7d-sdb.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-qds.dtb \
ls1021a-twr.dtb
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
new file mode 100644
index 0000000..00e9534
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -0,0 +1,405 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7d.dtsi"
+
+/ {
+ model = "Freescale i.MX7 SabreSD Board";
+ compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
+ memory {
+ reg = <0x80000000 0x80000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can2_3v3: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "can2-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_vref_1v8: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ wlreg_on: fixedregulator@100 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "wlreg_on";
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+};
+
+&cpu0 {
+ arm-supply = <&sw1a_reg>;
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze3000@08 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ codec: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clock-names = "mclk";
+ wlf,shared-lrclk;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_1>;
+
+ imx7d-sdb {
+ pinctrl_hog_1: hoggrp-1 {
+ fsl,pins = <
+ MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
+ MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
+ MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
+ >;
+ };
+
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79
+ MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79
+ MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79
+ MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79
+ MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79
+ MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79
+ MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
+ MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */
+ MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x59
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x19
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
+ MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59 /* WL_REG_ON */
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x5a
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x1a
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x5b
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x1b
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b
+ >;
+ };
+
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b
+ >;
+ };
+
+ };
+};
+
+&iomuxc_lpsr {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_2>;
+
+ imx7d-sdb {
+ pinctrl_hog_2: hoggrp-2 {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO05__GPIO5_IO5 0x14
+ MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x59 /* CAN_STBY */
+ >;
+ };
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x110b0
+ >;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio5 0 0>;
+ wp-gpios = <&gpio5 1 0>;
+ enable-sdio-wakeup;
+ keep-power-in-suspend;
+ status = "okay";
+};
--
1.9.1
next prev parent reply other threads:[~2015-04-20 21:08 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-20 21:05 [PATCH v4 00/11] Add Freescale i.mx7d support Frank.Li
2015-04-20 21:05 ` [PATCH v4 01/11] ARM: dts: add pinfunc include file to support imx7d Frank.Li
2015-04-20 21:05 ` [PATCH v4 02/11] ARM: dts: add pinfunc include file gpio1 " Frank.Li
2015-04-20 21:05 ` [PATCH v4 03/11] ARM: dts: add clock include file " Frank.Li
2015-04-20 21:05 ` [PATCH v4 04/11] Document: dt: binding: imx: update document for imx7d support Frank.Li
2015-04-21 20:40 ` Rob Herring
2015-04-20 21:05 ` [PATCH v4 05/11] ARM: dts: add imx7d soc dtsi file Frank.Li
2015-04-21 20:37 ` Rob Herring
2015-04-21 20:47 ` Zhi Li
2015-04-23 10:35 ` Fabio Estevam
2015-04-20 21:05 ` [PATCH v4 06/11] pinctrl: add imx7d support Frank.Li
2015-04-20 21:05 ` [PATCH v4 07/11] ARM: imx: add msl support for imx7d Frank.Li
2015-04-21 9:55 ` Russell King - ARM Linux
2015-04-20 21:05 ` [PATCH v4 08/11] ARM: imx: add gpt system timer " Frank.Li
2015-04-21 10:02 ` Russell King - ARM Linux
2015-04-21 14:17 ` Zhi Li
2015-04-20 21:05 ` [PATCH v4 09/11] ARM: imx: add imx7d clk tree support Frank.Li
2015-04-21 10:22 ` Sascha Hauer
2015-04-21 14:15 ` Zhi Li
2015-04-21 14:27 ` Sascha Hauer
2015-04-20 21:05 ` Frank.Li [this message]
2015-04-20 21:05 ` [PATCH v4 11/11] ARM: config: imx_v6_v7_defconfig add imx7d support Frank.Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1429563933-3129-11-git-send-email-Frank.Li@freescale.com \
--to=frank.li@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=lznuaa@gmail.com \
--cc=robh+dt@kernel.org \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).