linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	Johan Hovold <johan@kernel.org>
Subject: [PATCH 19/23] gpio: sysfs: use per-gpio locking
Date: Tue, 21 Apr 2015 17:42:27 +0200	[thread overview]
Message-ID: <1429630951-27082-20-git-send-email-johan@kernel.org> (raw)
In-Reply-To: <1429630951-27082-1-git-send-email-johan@kernel.org>

Add a per-gpio mutex to serialise attribute operations rather than use
one global mutex for all gpios and chips.

Having a single global lock for all gpios in a system adds unnecessary
latency to the sysfs interface, and especially when having gpio
controllers connected over slow buses.

Now that the global gpio-sysfs interrupt table is gone and with per-gpio
data in place, we can easily switch to using a more fine-grained locking
scheme.

Keep the global mutex to serialise the global (class) operations of gpio
export and unexport and chip removal.

Also document the locking assumptions made.

Note that this is also needed to fix a race between gpiod_export and
gpiod_unexport.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/gpio/gpiolib-sysfs.c | 52 +++++++++++++++++++++++++++++---------------
 1 file changed, 34 insertions(+), 18 deletions(-)

diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
index d9265b4609a3..19c4351021d9 100644
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -12,12 +12,15 @@
 
 struct gpiod_data {
 	struct gpio_desc *desc;
+
+	struct mutex mutex;
 	struct kernfs_node *value_kn;
 	int irq;
 };
 
-/* lock protects against unexport_gpio() being called while
- * sysfs files are active.
+/*
+ * Lock to serialise gpiod export and unexport, and prevent re-export of
+ * gpiod whose chip is being unregistered.
  */
 static DEFINE_MUTEX(sysfs_lock);
 
@@ -49,14 +52,15 @@ static ssize_t direction_show(struct device *dev,
 	struct gpio_desc *desc = data->desc;
 	ssize_t			status;
 
-	mutex_lock(&sysfs_lock);
+	mutex_lock(&data->mutex);
 
 	gpiod_get_direction(desc);
 	status = sprintf(buf, "%s\n",
 			test_bit(FLAG_IS_OUT, &desc->flags)
 				? "out" : "in");
 
-	mutex_unlock(&sysfs_lock);
+	mutex_unlock(&data->mutex);
+
 	return status;
 }
 
@@ -67,7 +71,7 @@ static ssize_t direction_store(struct device *dev,
 	struct gpio_desc *desc = data->desc;
 	ssize_t			status;
 
-	mutex_lock(&sysfs_lock);
+	mutex_lock(&data->mutex);
 
 	if (sysfs_streq(buf, "high"))
 		status = gpiod_direction_output_raw(desc, 1);
@@ -78,7 +82,8 @@ static ssize_t direction_store(struct device *dev,
 	else
 		status = -EINVAL;
 
-	mutex_unlock(&sysfs_lock);
+	mutex_unlock(&data->mutex);
+
 	return status ? : size;
 }
 static DEVICE_ATTR_RW(direction);
@@ -90,11 +95,12 @@ static ssize_t value_show(struct device *dev,
 	struct gpio_desc *desc = data->desc;
 	ssize_t			status;
 
-	mutex_lock(&sysfs_lock);
+	mutex_lock(&data->mutex);
 
 	status = sprintf(buf, "%d\n", gpiod_get_value_cansleep(desc));
 
-	mutex_unlock(&sysfs_lock);
+	mutex_unlock(&data->mutex);
+
 	return status;
 }
 
@@ -105,7 +111,7 @@ static ssize_t value_store(struct device *dev,
 	struct gpio_desc *desc = data->desc;
 	ssize_t			status;
 
-	mutex_lock(&sysfs_lock);
+	mutex_lock(&data->mutex);
 
 	if (!test_bit(FLAG_IS_OUT, &desc->flags)) {
 		status = -EPERM;
@@ -119,7 +125,8 @@ static ssize_t value_store(struct device *dev,
 		}
 	}
 
-	mutex_unlock(&sysfs_lock);
+	mutex_unlock(&data->mutex);
+
 	return status;
 }
 static DEVICE_ATTR_RW(value);
@@ -133,6 +140,7 @@ static irqreturn_t gpio_sysfs_irq(int irq, void *priv)
 	return IRQ_HANDLED;
 }
 
+/* Caller holds gpiod-data mutex. */
 static int gpio_sysfs_request_irq(struct device *dev, unsigned long gpio_flags)
 {
 	struct gpiod_data	*data = dev_get_drvdata(dev);
@@ -171,6 +179,10 @@ err_put_kn:
 	return ret;
 }
 
+/*
+ * Caller holds gpiod-data mutex (unless called after class-device
+ * deregistration).
+ */
 static void gpio_sysfs_free_irq(struct device *dev)
 {
 	struct gpiod_data *data = dev_get_drvdata(dev);
@@ -200,7 +212,7 @@ static ssize_t edge_show(struct device *dev,
 	ssize_t	status = 0;
 	int i;
 
-	mutex_lock(&sysfs_lock);
+	mutex_lock(&data->mutex);
 
 	for (i = 0; i < ARRAY_SIZE(trigger_types); i++) {
 		mask = desc->flags & GPIO_TRIGGER_MASK;
@@ -210,7 +222,8 @@ static ssize_t edge_show(struct device *dev,
 		}
 	}
 
-	mutex_unlock(&sysfs_lock);
+	mutex_unlock(&data->mutex);
+
 	return status;
 }
 
@@ -233,7 +246,7 @@ static ssize_t edge_store(struct device *dev,
 
 	flags = trigger_types[i].flags;
 
-	mutex_lock(&sysfs_lock);
+	mutex_lock(&data->mutex);
 
 	if ((desc->flags & GPIO_TRIGGER_MASK) == flags) {
 		status = size;
@@ -250,12 +263,13 @@ static ssize_t edge_store(struct device *dev,
 	}
 
 out_unlock:
-	mutex_unlock(&sysfs_lock);
+	mutex_unlock(&data->mutex);
 
 	return status;
 }
 static DEVICE_ATTR_RW(edge);
 
+/* Caller holds gpiod-data mutex. */
 static int sysfs_set_active_low(struct device *dev, int value)
 {
 	struct gpiod_data	*data = dev_get_drvdata(dev);
@@ -289,12 +303,12 @@ static ssize_t active_low_show(struct device *dev,
 	struct gpio_desc *desc = data->desc;
 	ssize_t			status;
 
-	mutex_lock(&sysfs_lock);
+	mutex_lock(&data->mutex);
 
 	status = sprintf(buf, "%d\n",
 				!!test_bit(FLAG_ACTIVE_LOW, &desc->flags));
 
-	mutex_unlock(&sysfs_lock);
+	mutex_unlock(&data->mutex);
 
 	return status;
 }
@@ -302,16 +316,17 @@ static ssize_t active_low_show(struct device *dev,
 static ssize_t active_low_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t size)
 {
+	struct gpiod_data	*data = dev_get_drvdata(dev);
 	ssize_t			status;
 	long			value;
 
-	mutex_lock(&sysfs_lock);
+	mutex_lock(&data->mutex);
 
 	status = kstrtol(buf, 0, &value);
 	if (status == 0)
 		status = sysfs_set_active_low(dev, value != 0);
 
-	mutex_unlock(&sysfs_lock);
+	mutex_unlock(&data->mutex);
 
 	return status ? : size;
 }
@@ -568,6 +583,7 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
 	}
 
 	data->desc = desc;
+	mutex_init(&data->mutex);
 
 	offset = gpio_chip_hwgpio(desc);
 	if (chip->names && chip->names[offset])
-- 
2.0.5


  parent reply	other threads:[~2015-04-21 15:43 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-21 15:42 [PATCH 00/23] gpio: sysfs: fixes and clean ups Johan Hovold
2015-04-21 15:42 ` [PATCH 01/23] gpio: sysfs: fix memory leaks and device hotplug Johan Hovold
2015-04-29 21:44   ` Linus Walleij
2015-04-30  8:26     ` Johan Hovold
2015-04-21 15:42 ` [PATCH 02/23] gpio: clean up gpiochip_remove Johan Hovold
2015-04-21 15:42 ` [PATCH 03/23] gpio: sysfs: drop redundant lock-as-irq Johan Hovold
2015-04-29 21:48   ` Linus Walleij
2015-04-30  9:07     ` Johan Hovold
2015-04-21 15:42 ` [PATCH 04/23] gpio: sysfs: preparatory clean ups Johan Hovold
2015-04-21 15:42 ` [PATCH 05/23] gpio: sysfs: reduce gpiochip-export locking scope Johan Hovold
2015-04-21 15:42 ` [PATCH 06/23] gpio: sysfs: clean up chip class-device handling Johan Hovold
2015-04-27  3:54   ` Alexandre Courbot
2015-04-27  8:47     ` Johan Hovold
2015-04-21 15:42 ` [PATCH 07/23] gpio: sysfs: rename gpiochip registration functions Johan Hovold
2015-04-27  3:54   ` Alexandre Courbot
2015-04-27  8:27     ` Johan Hovold
2015-04-27  8:50       ` Alexandre Courbot
2015-04-27  9:05         ` Johan Hovold
2015-04-28  3:27           ` Alexandre Courbot
2015-04-28 11:12             ` Johan Hovold
2015-04-21 15:42 ` [PATCH 08/23] gpio: remove gpiod_sysfs_set_active_low Johan Hovold
2015-04-27  3:54   ` Alexandre Courbot
2015-04-27  8:16     ` Johan Hovold
2015-04-27  8:34       ` Alexandre Courbot
2015-04-21 15:42 ` [PATCH 09/23] gpio: sysfs: use DEVICE_ATTR macros Johan Hovold
2015-04-21 15:42 ` [PATCH 10/23] gpio: sysfs: release irq after class-device deregistration Johan Hovold
2015-04-21 15:42 ` [PATCH 11/23] gpio: sysfs: remove redundant export tests Johan Hovold
2015-04-21 15:42 ` [PATCH 12/23] gpio: sysfs: add gpiod class-device data Johan Hovold
2015-04-21 15:42 ` [PATCH 13/23] gpio: sysfs: remove redundant gpio-descriptor parameters Johan Hovold
2015-04-21 15:42 ` [PATCH 14/23] gpio: sysfs: clean up interrupt-interface implementation Johan Hovold
2015-04-21 15:42 ` [PATCH 15/23] gpio: sysfs: only call irq helper if needed Johan Hovold
2015-04-21 15:42 ` [PATCH 16/23] gpio: sysfs: split irq allocation and deallocation Johan Hovold
2015-04-21 15:42 ` [PATCH 17/23] gpio: sysfs: clean up edge_store Johan Hovold
2015-04-21 15:42 ` [PATCH 18/23] gpio: sysfs: clean up gpiod_export_link locking Johan Hovold
2015-04-21 15:42 ` Johan Hovold [this message]
2015-04-21 15:42 ` [PATCH 20/23] gpio: sysfs: fix race between gpiod export and unexport Johan Hovold
2015-04-21 15:42 ` [PATCH 21/23] gpio: sysfs: rename active-low helper Johan Hovold
2015-04-21 15:42 ` [PATCH 22/23] gpio: sysfs: remove FLAG_SYSFS_DIR Johan Hovold
2015-04-21 15:42 ` [PATCH 23/23] gpio: sysfs: move irq trigger flags to class-device data Johan Hovold
2015-04-27  3:58 ` [PATCH 00/23] gpio: sysfs: fixes and clean ups Alexandre Courbot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1429630951-27082-20-git-send-email-johan@kernel.org \
    --to=johan@kernel.org \
    --cc=gnurou@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).