From: <Frank.Li@freescale.com>
To: lznuaa@gmail.com, shawn.guo@linaro.org, linus.walleij@linaro.org,
robh+dt@kernel.org
Cc: linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, Frank Li <Frank.Li@freescale.com>
Subject: [PATCH v6 00/11] Add Freescale i.mx7d support
Date: Wed, 22 Apr 2015 05:43:19 +0800 [thread overview]
Message-ID: <1429652610-25265-1-git-send-email-Frank.Li@freescale.com> (raw)
From: Frank Li <Frank.Li@freescale.com>
add basic support for chip imx7d.
- MSL
- Clock support. All clock enabled.
- pinctrl support
- SD Card support
Change from v5 to v6
- dual license for dts
- fix typo statue
- Remove smp_operations
- Remove GPT check cpu_is_mx7() by use old compatible mode
- Remove dts arch_timer part, which not used in this patch series
- correct GIC reg map
Change from v4 to v5
- Remove imx7d_map_io()
- Remove clk_register_clkdev(clks[IMX7D_GPT1_ROOT_CLK], "ipg", "imx-gpt.0");
- Remove clk_register_clkdev(clks[IMX7D_GPT_3M_CLK], "gpt_3m", "imx-gpt.0");
- Add comment about enable all clock
- Add Type IMX_PLLV3_ENET_IMX7 and remove cpu_is_imx7d()
Change from v3 to v4
- Fixed the problem review by Russel king.
Remove __mxc_arch_type
Remove MXC_ARCH_CA7
use new smp_operation for ca7 platform
- imx7d.dtsi remove unecessary part for bring up
- imx7d-sdb.dsi, just enable uart i2c and sd card
- Add device tree binding document for timer, clock and pinctrl
Change from v2 to v3
- remove unsupport part in imx7d-sdb.dtb
Change from V1 to V2:
- split patch1 to three small one to avoid 100k maillist limitation.
- fix imx7d.dtsi code style problem
Anson Huang (1):
ARM: imx: add msl support for imx7d
Frank Li (10):
ARM: dts: add pinfunc include file to support imx7d
ARM: dts: add pinfunc include file gpio1 to support imx7d
ARM: dts: add clock include file to support imx7d
Document: dt: binding: imx: update document for imx7d support
ARM: dts: add imx7d soc dtsi file
pinctrl: add imx7d support
ARM: imx: add gpt system timer support for imx7d
ARM: imx: add imx7d clk tree support
arm: dts: add imx7d-sdb support
ARM: config: imx_v6_v7_defconfig add imx7d support
.../devicetree/bindings/clock/imx7d-clock.txt | 13 +
.../bindings/pinctrl/fsl,imx-pinctrl.txt | 3 +
.../bindings/pinctrl/fsl,imx7d-pinctrl.txt | 27 +
.../devicetree/bindings/timer/fsl,imxgpt.txt | 3 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx7d-pinfunc.h | 1153 ++++++++++++++++++++
arch/arm/boot/dts/imx7d-sdb.dts | 444 ++++++++
arch/arm/boot/dts/imx7d.dtsi | 513 +++++++++
arch/arm/configs/imx_v6_v7_defconfig | 1 +
arch/arm/mach-imx/Kconfig | 11 +
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/anatop.c | 5 +-
arch/arm/mach-imx/clk-imx7d.c | 887 +++++++++++++++
arch/arm/mach-imx/clk-pllv3.c | 16 +-
arch/arm/mach-imx/clk.h | 9 +
arch/arm/mach-imx/cpu.c | 3 +
arch/arm/mach-imx/hardware.h | 7 +-
arch/arm/mach-imx/mach-imx7d.c | 46 +
arch/arm/mach-imx/mx7.h | 38 +
arch/arm/mach-imx/mxc.h | 8 +-
arch/arm/mach-imx/time.c | 1 +
drivers/pinctrl/freescale/Kconfig | 7 +
drivers/pinctrl/freescale/Makefile | 1 +
drivers/pinctrl/freescale/pinctrl-imx.c | 3 +-
drivers/pinctrl/freescale/pinctrl-imx.h | 1 +
drivers/pinctrl/freescale/pinctrl-imx7d.c | 411 +++++++
include/dt-bindings/clock/imx7d-clock.h | 450 ++++++++
27 files changed, 4058 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/imx7d-clock.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
create mode 100644 arch/arm/boot/dts/imx7d-pinfunc.h
create mode 100644 arch/arm/boot/dts/imx7d-sdb.dts
create mode 100644 arch/arm/boot/dts/imx7d.dtsi
create mode 100644 arch/arm/mach-imx/clk-imx7d.c
create mode 100644 arch/arm/mach-imx/mach-imx7d.c
create mode 100644 arch/arm/mach-imx/mx7.h
create mode 100644 drivers/pinctrl/freescale/pinctrl-imx7d.c
create mode 100644 include/dt-bindings/clock/imx7d-clock.h
--
1.9.1
next reply other threads:[~2015-04-21 21:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-21 21:43 Frank.Li [this message]
2015-04-21 21:43 ` [PATCH v6 01/11] ARM: dts: add pinfunc include file to support imx7d Frank.Li
2015-04-21 21:43 ` [PATCH v6 02/11] ARM: dts: add pinfunc include file gpio1 " Frank.Li
2015-04-21 21:43 ` [PATCH v6 03/11] ARM: dts: add clock include file " Frank.Li
2015-04-21 21:43 ` [PATCH v6 04/11] Document: dt: binding: imx: update document for imx7d support Frank.Li
2015-04-21 21:43 ` [PATCH v6 05/11] ARM: dts: add imx7d soc dtsi file Frank.Li
2015-04-21 21:43 ` [PATCH v6 06/11] pinctrl: add imx7d support Frank.Li
[not found] ` <1429652610-25265-1-git-send-email-Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-04-21 21:43 ` [PATCH v6 07/11] ARM: imx: add msl support for imx7d Frank.Li-KZfg59tc24xl57MIdRCFDg
2015-04-21 21:43 ` [PATCH v6 08/11] ARM: imx: add gpt system timer " Frank.Li-KZfg59tc24xl57MIdRCFDg
2015-04-21 21:43 ` [PATCH v6 09/11] ARM: imx: add imx7d clk tree support Frank.Li
2015-04-21 21:43 ` [PATCH v6 10/11] arm: dts: add imx7d-sdb support Frank.Li
2015-04-21 21:43 ` [PATCH v6 11/11] ARM: config: imx_v6_v7_defconfig add imx7d support Frank.Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1429652610-25265-1-git-send-email-Frank.Li@freescale.com \
--to=frank.li@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=lznuaa@gmail.com \
--cc=robh+dt@kernel.org \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).