From: Johan Hovold <johan@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan@kernel.org>
Subject: [PATCH v2 14/23] gpio: sysfs: clean up interrupt-interface implementation
Date: Mon, 4 May 2015 17:10:39 +0200 [thread overview]
Message-ID: <1430752248-15401-15-git-send-email-johan@kernel.org> (raw)
In-Reply-To: <1430752248-15401-1-git-send-email-johan@kernel.org>
Store the value sysfs entry in the gpiod data rather than in a global
table accessed through an index stored in the overloaded gpio-descriptor
flag field.
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/gpio/gpiolib-sysfs.c | 54 +++++++++++++++-----------------------------
drivers/gpio/gpiolib.h | 3 ---
2 files changed, 18 insertions(+), 39 deletions(-)
diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
index 0bc959fbcf23..bccba406fc22 100644
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -12,11 +12,9 @@
struct gpiod_data {
struct gpio_desc *desc;
+ struct kernfs_node *value_kn;
};
-static DEFINE_IDR(dirent_idr);
-
-
/* lock protects against unexport_gpio() being called while
* sysfs files are active.
*/
@@ -127,9 +125,10 @@ static DEVICE_ATTR_RW(value);
static irqreturn_t gpio_sysfs_irq(int irq, void *priv)
{
- struct kernfs_node *value_sd = priv;
+ struct gpiod_data *data = priv;
+
+ sysfs_notify_dirent(data->value_kn);
- sysfs_notify_dirent(value_sd);
return IRQ_HANDLED;
}
@@ -137,9 +136,8 @@ static int gpio_setup_irq(struct device *dev, unsigned long gpio_flags)
{
struct gpiod_data *data = dev_get_drvdata(dev);
struct gpio_desc *desc = data->desc;
- struct kernfs_node *value_sd;
unsigned long irq_flags;
- int ret, irq, id;
+ int ret, irq;
if ((desc->flags & GPIO_TRIGGER_MASK) == gpio_flags)
return 0;
@@ -148,17 +146,15 @@ static int gpio_setup_irq(struct device *dev, unsigned long gpio_flags)
if (irq < 0)
return -EIO;
- id = desc->flags >> ID_SHIFT;
- value_sd = idr_find(&dirent_idr, id);
- if (value_sd)
- free_irq(irq, value_sd);
+ if (data->value_kn)
+ free_irq(irq, data);
desc->flags &= ~GPIO_TRIGGER_MASK;
if (!gpio_flags) {
gpiochip_unlock_as_irq(desc->chip, gpio_chip_hwgpio(desc));
ret = 0;
- goto free_id;
+ goto free_kn;
}
irq_flags = IRQF_SHARED;
@@ -169,25 +165,12 @@ static int gpio_setup_irq(struct device *dev, unsigned long gpio_flags)
irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
- if (!value_sd) {
- value_sd = sysfs_get_dirent(dev->kobj.sd, "value");
- if (!value_sd) {
+ if (!data->value_kn) {
+ data->value_kn = sysfs_get_dirent(dev->kobj.sd, "value");
+ if (!data->value_kn) {
ret = -ENODEV;
goto err_out;
}
-
- ret = idr_alloc(&dirent_idr, value_sd, 1, 0, GFP_KERNEL);
- if (ret < 0)
- goto free_sd;
- id = ret;
-
- desc->flags &= GPIO_FLAGS_MASK;
- desc->flags |= (unsigned long)id << ID_SHIFT;
-
- if (desc->flags >> ID_SHIFT != id) {
- ret = -ERANGE;
- goto free_id;
- }
}
/*
@@ -200,10 +183,10 @@ static int gpio_setup_irq(struct device *dev, unsigned long gpio_flags)
*/
ret = gpiochip_lock_as_irq(desc->chip, gpio_chip_hwgpio(desc));
if (ret < 0)
- goto free_id;
+ goto free_kn;
ret = request_any_context_irq(irq, gpio_sysfs_irq, irq_flags,
- "gpiolib", value_sd);
+ "gpiolib", data);
if (ret < 0)
goto err_unlock;
@@ -212,12 +195,11 @@ static int gpio_setup_irq(struct device *dev, unsigned long gpio_flags)
err_unlock:
gpiochip_unlock_as_irq(desc->chip, gpio_chip_hwgpio(desc));
-free_id:
- idr_remove(&dirent_idr, id);
- desc->flags &= GPIO_FLAGS_MASK;
-free_sd:
- if (value_sd)
- sysfs_put(value_sd);
+free_kn:
+ if (data->value_kn) {
+ sysfs_put(data->value_kn);
+ data->value_kn = NULL;
+ }
err_out:
return ret;
}
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index efdd5ded4965..4a857da698b2 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -90,9 +90,6 @@ struct gpio_desc {
#define FLAG_SYSFS_DIR 10 /* show sysfs direction attribute */
#define FLAG_IS_HOGGED 11 /* GPIO is hogged */
-#define ID_SHIFT 16 /* add new flags before this one */
-
-#define GPIO_FLAGS_MASK ((1 << ID_SHIFT) - 1)
#define GPIO_TRIGGER_MASK (BIT(FLAG_TRIG_FALL) | BIT(FLAG_TRIG_RISE))
const char *label;
--
2.0.5
next prev parent reply other threads:[~2015-05-04 15:13 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-04 15:10 [PATCH v2 00/23] gpio: sysfs: fixes and clean ups Johan Hovold
2015-05-04 15:10 ` [PATCH v2 01/23] gpio: sysfs: fix memory leaks and device hotplug Johan Hovold
2015-05-04 15:10 ` [PATCH v2 02/23] gpio: clean up gpiochip_remove Johan Hovold
2015-05-12 7:58 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 03/23] gpio: sysfs: fix redundant lock-as-irq handling Johan Hovold
2015-05-12 7:59 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 04/23] gpio: sysfs: preparatory clean ups Johan Hovold
2015-05-12 8:00 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 05/23] gpio: sysfs: reduce gpiochip-export locking scope Johan Hovold
2015-05-12 8:05 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 06/23] gpio: sysfs: clean up chip class-device handling Johan Hovold
2015-05-12 8:14 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 07/23] gpio: sysfs: rename gpiochip registration functions Johan Hovold
2015-05-12 8:24 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 08/23] gpio: remove gpiod_sysfs_set_active_low Johan Hovold
2015-05-12 8:27 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 09/23] gpio: sysfs: use DEVICE_ATTR macros Johan Hovold
2015-05-12 8:28 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 10/23] gpio: sysfs: release irq after class-device deregistration Johan Hovold
2015-05-12 8:29 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 11/23] gpio: sysfs: remove redundant export tests Johan Hovold
2015-05-12 8:30 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 12/23] gpio: sysfs: add gpiod class-device data Johan Hovold
2015-05-12 8:31 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 13/23] gpio: sysfs: remove redundant gpio-descriptor parameters Johan Hovold
2015-05-12 8:32 ` Linus Walleij
2015-05-04 15:10 ` Johan Hovold [this message]
2015-05-12 8:34 ` [PATCH v2 14/23] gpio: sysfs: clean up interrupt-interface implementation Linus Walleij
2015-05-04 15:10 ` [PATCH v2 15/23] gpio: sysfs: only call irq helper if needed Johan Hovold
2015-05-12 8:35 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 16/23] gpio: sysfs: split irq allocation and deallocation Johan Hovold
2015-05-12 8:36 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 17/23] gpio: sysfs: clean up edge_store Johan Hovold
2015-05-12 8:37 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 18/23] gpio: sysfs: clean up gpiod_export_link locking Johan Hovold
2015-05-12 8:38 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 19/23] gpio: sysfs: use per-gpio locking Johan Hovold
2015-05-12 8:39 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 20/23] gpio: sysfs: fix race between gpiod export and unexport Johan Hovold
2015-05-12 8:42 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 21/23] gpio: sysfs: rename active-low helper Johan Hovold
2015-05-12 8:43 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 22/23] gpio: sysfs: remove FLAG_SYSFS_DIR Johan Hovold
2015-05-12 8:44 ` Linus Walleij
2015-05-04 15:10 ` [PATCH v2 23/23] gpio: sysfs: move irq trigger flags to class-device data Johan Hovold
2015-05-12 8:45 ` Linus Walleij
2015-05-12 6:37 ` [PATCH v2 00/23] gpio: sysfs: fixes and clean ups Alexandre Courbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430752248-15401-15-git-send-email-johan@kernel.org \
--to=johan@kernel.org \
--cc=gnurou@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).