From mboxrd@z Thu Jan 1 00:00:00 1970 From: Geert Uytterhoeven Subject: [PATCH v2 10/11] w1: Allow compile test of GPIO consumers if !GPIOLIB Date: Sun, 2 Aug 2015 11:09:54 +0200 Message-ID: <1438506594-31888-1-git-send-email-geert@linux-m68k.org> References: <1438506475-31012-1-git-send-email-geert@linux-m68k.org> Return-path: Received: from michel.telenet-ops.be ([195.130.137.88]:35143 "EHLO michel.telenet-ops.be" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752180AbbHBJJz (ORCPT ); Sun, 2 Aug 2015 05:09:55 -0400 In-Reply-To: <1438506475-31012-1-git-send-email-geert@linux-m68k.org> Sender: linux-gpio-owner@vger.kernel.org List-Id: linux-gpio@vger.kernel.org To: Evgeniy Polyakov Cc: Linus Walleij , Alexandre Courbot , linux-gpio@vger.kernel.org, Geert Uytterhoeven The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven Acked-by: Linus Walleij --- v2: - Add Acked-by. --- drivers/w1/masters/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index 1708b2300c7a9ca2..00827d2897b534bc 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -49,7 +49,7 @@ config W1_MASTER_DS1WM config W1_MASTER_GPIO tristate "GPIO 1-wire busmaster" - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help Say Y here if you want to communicate with your 1-wire devices using GPIO pins. This driver uses the GPIO API to control the wire. -- 1.9.1