From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus Pargmann Subject: [PATCH 0/3] gpiolib: Initializing GPIOs using DT property gpio-initval Date: Wed, 19 Aug 2015 12:18:29 +0200 Message-ID: <1439979512-3894-1-git-send-email-mpa@pengutronix.de> Return-path: Received: from metis.ext.pengutronix.de ([92.198.50.35]:55137 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751525AbbHSKTP (ORCPT ); Wed, 19 Aug 2015 06:19:15 -0400 Sender: linux-gpio-owner@vger.kernel.org List-Id: linux-gpio@vger.kernel.org To: Linus Walleij Cc: Alexandre Courbot , Arun Bharadwaj , =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= , Johan Hovold , linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de, Markus Pargmann Hi, This series adds a gpio-initval property to the devicetree. It provides a way to initialize GPIOs to a defined value. The previous patch was '[PATCH v2] gpio: Allow hogged gpios to be requested' which would have allowed to request hogged GPIOs. Linus suggested a separate DT property as hogged gpios should not be requested. There are 3 patches. The first two simplify the function gpiod_hog. The third reuses the gpiod_hog()_code for a new gpiod_initialize() and adds the parsing of the DT. This series is based on the series "[PATCH v3 0/9] gpiolib: Add GPIO name support". Best regards, Markus Markus Pargmann (3): gpio: Use __gpiod_request directly gpiolib: gpiod_hog remove separate name argument gpiolib: Add GPIO initialization Documentation/devicetree/bindings/gpio/gpio.txt | 29 ++++++---- drivers/gpio/gpiolib-of.c | 11 +++- drivers/gpio/gpiolib.c | 74 +++++++++++++++++-------- drivers/gpio/gpiolib.h | 6 +- 4 files changed, 83 insertions(+), 37 deletions(-) -- 2.4.6