From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andy Shevchenko Subject: [PATCH v2 8/8] pwm-pca9685: enable ACPI device found on Galileo Gen2 Date: Thu, 1 Oct 2015 14:20:30 +0300 Message-ID: <1443698430-74415-9-git-send-email-andriy.shevchenko@linux.intel.com> References: <1443698430-74415-1-git-send-email-andriy.shevchenko@linux.intel.com> Return-path: In-Reply-To: <1443698430-74415-1-git-send-email-andriy.shevchenko@linux.intel.com> Sender: linux-acpi-owner@vger.kernel.org To: linux-acpi@vger.kernel.org, linux-i2c@vger.kernel.org, linux-gpio@vger.kernel.org, Lee Jones , Wolfram Sang , Linus Walleij , "Rafael J . Wysocki" , Mika Westerberg , "Puustinen, Ismo" , "Pandruvada, Srinivas" , linux-kernel@vger.kernel.org Cc: Andy Shevchenko , Thierry Reding List-Id: linux-gpio@vger.kernel.org There is a chip connected to i2c bus on Intel Galileo Gen2 board. Enable it via ACPI ID INT3492. Cc: Thierry Reding Signed-off-by: Andy Shevchenko --- drivers/pwm/Kconfig | 2 +- drivers/pwm/pwm-pca9685.c | 20 ++++++++++++++++---- 2 files changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 062630a..bb114ef 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -242,7 +242,7 @@ config PWM_MXS config PWM_PCA9685 tristate "NXP PCA9685 PWM driver" - depends on OF && I2C + depends on I2C select REGMAP_I2C help Generic PWM framework driver for NXP PCA9685 LED controller. diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c index 70448a6..117fccf 100644 --- a/drivers/pwm/pwm-pca9685.c +++ b/drivers/pwm/pwm-pca9685.c @@ -19,9 +19,11 @@ * this program. If not, see . */ +#include #include #include #include +#include #include #include #include @@ -297,7 +299,6 @@ static const struct regmap_config pca9685_regmap_i2c_config = { static int pca9685_pwm_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct device_node *np = client->dev.of_node; struct pca9685 *pca; int ret; int mode2; @@ -320,12 +321,12 @@ static int pca9685_pwm_probe(struct i2c_client *client, regmap_read(pca->regmap, PCA9685_MODE2, &mode2); - if (of_property_read_bool(np, "invert")) + if (device_property_read_bool(&client->dev, "invert")) mode2 |= MODE2_INVRT; else mode2 &= ~MODE2_INVRT; - if (of_property_read_bool(np, "open-drain")) + if (device_property_read_bool(&client->dev, "open-drain")) mode2 &= ~MODE2_OUTDRV; else mode2 |= MODE2_OUTDRV; @@ -363,16 +364,27 @@ static const struct i2c_device_id pca9685_id[] = { }; MODULE_DEVICE_TABLE(i2c, pca9685_id); +#ifdef CONFIG_ACPI +static const struct acpi_device_id pca9685_acpi_ids[] = { + { "INT3492", 0 }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids); +#endif + +#ifdef CONFIG_OF static const struct of_device_id pca9685_dt_ids[] = { { .compatible = "nxp,pca9685-pwm", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, pca9685_dt_ids); +#endif static struct i2c_driver pca9685_i2c_driver = { .driver = { .name = "pca9685-pwm", - .of_match_table = pca9685_dt_ids, + .acpi_match_table = ACPI_PTR(pca9685_acpi_ids), + .of_match_table = of_match_ptr(pca9685_dt_ids), }, .probe = pca9685_pwm_probe, .remove = pca9685_pwm_remove, -- 2.5.1