linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Andrew F. Davis" <afd@ti.com>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Lee Jones <lee.jones@linaro.org>, Mark Brown <broonie@kernel.org>,
	Alexandre Courbot <gnurou@gmail.com>,
	Grygorii Strashko <grygorii.strashko@ti.com>
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, "Andrew F. Davis" <afd@ti.com>
Subject: [PATCH 4/4] gpio: tps65086: Add GPIO driver for the TPS65086 PMIC
Date: Fri, 16 Oct 2015 11:59:13 -0500	[thread overview]
Message-ID: <1445014753-15450-5-git-send-email-afd@ti.com> (raw)
In-Reply-To: <1445014753-15450-1-git-send-email-afd@ti.com>

Add support for the TPS65086 PMIC GPOs.

TPS65086 has four configurable GPOs that can be used for several
purposes.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 drivers/gpio/Kconfig         |   6 +++
 drivers/gpio/Makefile        |   1 +
 drivers/gpio/gpio-tps65086.c | 114 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 121 insertions(+)
 create mode 100644 drivers/gpio/gpio-tps65086.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b4fc9e4..c585d42 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -824,6 +824,12 @@ config GPIO_TIMBERDALE
 	---help---
 	Add support for the GPIO IP in the timberdale FPGA.
 
+config GPIO_TPS65086
+	tristate "TI TPS65086 GPO"
+	depends on MFD_TPS65086
+	help
+	  This driver supports the GPO on the TI TPS65086 PMIC.
+
 config GPIO_TPS6586X
 	bool "TPS6586X GPIO"
 	depends on MFD_TPS6586X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index f79a7c4..2611c7e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -94,6 +94,7 @@ obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
 obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
 obj-$(CONFIG_GPIO_PALMAS)	+= gpio-palmas.o
+obj-$(CONFIG_GPIO_TPS65086)	+= gpio-tps65086.o
 obj-$(CONFIG_GPIO_TPS6586X)	+= gpio-tps6586x.o
 obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
 obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
diff --git a/drivers/gpio/gpio-tps65086.c b/drivers/gpio/gpio-tps65086.c
new file mode 100644
index 0000000..9fba758
--- /dev/null
+++ b/drivers/gpio/gpio-tps65086.c
@@ -0,0 +1,114 @@
+/*
+ * TI TPS65086x GPIO Driver
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65912 driver
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+#include <linux/mfd/tps65086.h>
+
+struct tps65086_gpio {
+	struct gpio_chip gpio_chip;
+	struct tps65086 *tps;
+};
+
+#define to_tps65086_gpio(gc) container_of(gc, struct tps65086_gpio, gpio_chip)
+
+static int tps65086_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct tps65086_gpio *gpio = to_tps65086_gpio(gc);
+	int ret, val;
+
+	ret = regmap_read(gpio->tps->regmap, TPS65086_GPOCTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	return val & BIT(4 + offset);
+}
+
+static void tps65086_gpio_set(struct gpio_chip *gc, unsigned offset,
+			      int value)
+{
+	struct tps65086_gpio *gpio = to_tps65086_gpio(gc);
+
+	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
+			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
+}
+
+static struct gpio_chip template_chip = {
+	.label			= "tps65086-gpio",
+	.owner			= THIS_MODULE,
+	.get			= tps65086_gpio_get,
+	.set			= tps65086_gpio_set,
+	.can_sleep		= true,
+	.ngpio			= 4,
+	.base			= -1,
+};
+
+static int tps65086_gpio_probe(struct platform_device *pdev)
+{
+	struct tps65086_gpio *gpio;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->tps = dev_get_drvdata(pdev->dev.parent);
+	gpio->gpio_chip = template_chip;
+	ret = gpiochip_add(&gpio->gpio_chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	return 0;
+}
+
+static int tps65086_gpio_remove(struct platform_device *pdev)
+{
+	struct tps65086_gpio *gpio = platform_get_drvdata(pdev);
+
+	gpiochip_remove(&gpio->gpio_chip);
+
+	return 0;
+}
+
+static const struct of_device_id tps65086_gpio_of_match_table[] = {
+	{ .compatible = "ti,tps65086-gpio", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, tps65086_gpio_of_match_table);
+
+static struct platform_driver tps65086_gpio_driver = {
+	.driver = {
+		.name = "tps65086-gpio",
+		.of_match_table = tps65086_gpio_of_match_table,
+	},
+	.probe = tps65086_gpio_probe,
+	.remove = tps65086_gpio_remove,
+};
+
+module_platform_driver(tps65086_gpio_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("TPS65086 GPIO driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

      parent reply	other threads:[~2015-10-16 16:59 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-16 16:59 [PATCH 0/4] Add support for the TI TPS65086 PMIC Andrew F. Davis
2015-10-16 16:59 ` [PATCH 1/4] Documentation: tps65086: Add DT bindings for the " Andrew F. Davis
2015-10-19  9:13   ` Lee Jones
2015-10-19 15:16     ` Andrew F. Davis
2015-10-19 15:21       ` Lee Jones
2015-10-19 15:23         ` Andrew F. Davis
2015-10-20 11:31           ` Lee Jones
2015-10-20 14:02             ` Andrew F. Davis
2015-10-21  8:46               ` Lee Jones
2015-10-21 10:29                 ` Mark Brown
2015-10-21 11:18                   ` Lee Jones
2015-10-21 12:14                     ` Mark Brown
2015-10-21 15:26                       ` Lee Jones
2015-10-21 16:13                         ` Mark Brown
2015-10-16 16:59 ` [PATCH 2/4] mfd: tps65086: Add driver " Andrew F. Davis
     [not found]   ` <1445014753-15450-3-git-send-email-afd-l0cyMroinI0@public.gmane.org>
2015-10-19  9:23     ` Lee Jones
2015-10-19 16:03       ` Andrew F. Davis
2015-10-20 10:02         ` Lee Jones
2015-10-20 14:58           ` Andrew F. Davis
2015-10-21  8:43             ` Lee Jones
2015-10-21 16:28               ` Andrew F. Davis
     [not found]                 ` <5627BD11.1000704-l0cyMroinI0@public.gmane.org>
2015-10-21 19:24                   ` Lee Jones
2015-10-16 16:59 ` [PATCH 3/4] regulator: tps65086: Add regulator " Andrew F. Davis
2015-10-16 16:59 ` Andrew F. Davis [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445014753-15450-5-git-send-email-afd@ti.com \
    --to=afd@ti.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=gnurou@gmail.com \
    --cc=grygorii.strashko@ti.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=lee.jones@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).