* [PATCH 0/3] gpio support for Broadcom NSP
@ 2015-12-02 4:46 Yendapally Reddy Dhananjaya Reddy
0 siblings, 0 replies; only message in thread
From: Yendapally Reddy Dhananjaya Reddy @ 2015-12-02 4:46 UTC (permalink / raw)
To: Linus Walleij, Ray Jui, Scott Branden, Jon Mason
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
linux-kernel, linux-gpio, linux-arm-kernel,
bcm-kernel-feedback-list, Yendapally Reddy Dhananjaya Reddy
This patchset contains the gpio support for the Broadcom's
Northstar Plus (NSP) SOC.
The first patch provides the documentation details and the
second patch contains driver details. The third patch
contains the enable method.
This patchset has been tested on NSP bcm958625HR board with pinctrl
patch added.
This patchset is based on v4.4.0-rc1 and is available from github
repo: https://github.com/Broadcom/cygnus-linux.git
branch: nsp-gpio-v1
Yendapally Reddy Dhananjaya Reddy (3):
pinctrl: Broadcom NSP GPIO-a device tree bindings
pinctrl: nsp: add gpio-a driver support for Broadcom NSP SoC
ARM: dts: enable GPIO-a for Broadcom NSP
.../devicetree/bindings/pinctrl/brcm,nsp-gpio.txt | 80 +++
arch/arm/boot/dts/bcm-nsp.dtsi | 12 +
drivers/pinctrl/bcm/Kconfig | 17 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-nsp-gpio.c | 749 +++++++++++++++++++++
5 files changed, 859 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,nsp-gpio.txt
create mode 100644 drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
--
2.1.0
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2015-12-02 4:46 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-12-02 4:46 [PATCH 0/3] gpio support for Broadcom NSP Yendapally Reddy Dhananjaya Reddy
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).