From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Dooks Subject: [PATCH 2/2] gpio: pca935x: fix of-only probed devices Date: Tue, 8 Dec 2015 10:19:26 +0000 Message-ID: <1449569966-16816-3-git-send-email-ben.dooks@codethink.co.uk> References: <1449569966-16816-1-git-send-email-ben.dooks@codethink.co.uk> Return-path: Received: from ducie-dc1.codethink.co.uk ([185.25.241.215]:59183 "EHLO ducie-dc1.codethink.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933078AbbLHKTh (ORCPT ); Tue, 8 Dec 2015 05:19:37 -0500 In-Reply-To: <1449569966-16816-1-git-send-email-ben.dooks@codethink.co.uk> Sender: linux-gpio-owner@vger.kernel.org List-Id: linux-gpio@vger.kernel.org To: ben.dooks@codethink.co.uk, linus.walleij@linaro.org, gnurou@gmail.com, linux-gpio@vger.kernel.org If the pca953x device is probed from OF using the proper OF probing then the i2c-client will be NULL and the device probe will fail as id is NULL and it isn't an ACPI device (previous drivers would simply OOPS out). Add support for the of_device_id table having the same data as the others so that the correct paths will be taken when registering a device. An example of current valid of node which did not work: gpio@38 { compatible = "onsemi,pca9654", "nxp,pca9534"; reg = <0x38>; interrupt-parent = <&gpio5>; interrupts = <25 IRQ_TYPE_LEVEL_LOW>; }; Signed-off-by: Ben Dooks --- drivers/gpio/gpio-pca953x.c | 76 ++++++++++++++++++++++++++------------------- 1 file changed, 44 insertions(+), 32 deletions(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 9847931..4881774 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -660,6 +660,8 @@ out: return ret; } +static const struct of_device_id pca953x_dt_ids[]; + static int pca953x_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -691,12 +693,18 @@ static int pca953x_probe(struct i2c_client *client, chip->driver_data = id->driver_data; } else { const struct acpi_device_id *id; + const struct of_device_id *match; - id = acpi_match_device(pca953x_acpi_ids, &client->dev); - if (!id) - return -ENODEV; + match = of_match_device(pca953x_dt_ids, &client->dev); + if (match) { + chip->driver_data = (int)(uintptr_t)match->data; + } else { + id = acpi_match_device(pca953x_acpi_ids, &client->dev); + if (!id) + return -ENODEV; - chip->driver_data = id->driver_data; + chip->driver_data = id->driver_data; + } } chip->chip_type = PCA_CHIP_TYPE(chip->driver_data); @@ -755,35 +763,39 @@ static int pca953x_remove(struct i2c_client *client) return 0; } +/* convenience to stop overlong match-table lines */ +#define OF_953X(__nrgpio, __int) (void *)(__nrgpio | PCA953X_TYPE | __int) +#define OF_957X(__nrgpio, __int) (void *)(__nrgpio | PCA957X_TYPE | __int) + static const struct of_device_id pca953x_dt_ids[] = { - { .compatible = "nxp,pca9505", }, - { .compatible = "nxp,pca9534", }, - { .compatible = "nxp,pca9535", }, - { .compatible = "nxp,pca9536", }, - { .compatible = "nxp,pca9537", }, - { .compatible = "nxp,pca9538", }, - { .compatible = "nxp,pca9539", }, - { .compatible = "nxp,pca9554", }, - { .compatible = "nxp,pca9555", }, - { .compatible = "nxp,pca9556", }, - { .compatible = "nxp,pca9557", }, - { .compatible = "nxp,pca9574", }, - { .compatible = "nxp,pca9575", }, - { .compatible = "nxp,pca9698", }, - - { .compatible = "maxim,max7310", }, - { .compatible = "maxim,max7312", }, - { .compatible = "maxim,max7313", }, - { .compatible = "maxim,max7315", }, - - { .compatible = "ti,pca6107", }, - { .compatible = "ti,tca6408", }, - { .compatible = "ti,tca6416", }, - { .compatible = "ti,tca6424", }, - - { .compatible = "onsemi,pca9654" }, - - { .compatible = "exar,xra1202", }, + { .compatible = "nxp,pca9505", .data = OF_953X(40, PCA_INT), }, + { .compatible = "nxp,pca9534", .data = OF_953X( 8, PCA_INT), }, + { .compatible = "nxp,pca9535", .data = OF_953X(16, PCA_INT), }, + { .compatible = "nxp,pca9536", .data = OF_953X( 4, 0), }, + { .compatible = "nxp,pca9537", .data = OF_953X( 4, PCA_INT), }, + { .compatible = "nxp,pca9538", .data = OF_953X( 8, PCA_INT), }, + { .compatible = "nxp,pca9539", .data = OF_953X(16, PCA_INT), }, + { .compatible = "nxp,pca9554", .data = OF_953X( 8, PCA_INT), }, + { .compatible = "nxp,pca9555", .data = OF_953X(16, PCA_INT), }, + { .compatible = "nxp,pca9556", .data = OF_953X( 8, 0), }, + { .compatible = "nxp,pca9557", .data = OF_953X( 8, 0), }, + { .compatible = "nxp,pca9574", .data = OF_957X( 8, PCA_INT), }, + { .compatible = "nxp,pca9575", .data = OF_957X(16, PCA_INT), }, + { .compatible = "nxp,pca9698", .data = OF_953X(40, 0), }, + + { .compatible = "maxim,max7310", .data = OF_953X( 8, 0), }, + { .compatible = "maxim,max7312", .data = OF_953X(16, PCA_INT), }, + { .compatible = "maxim,max7313", .data = OF_953X(16, PCA_INT), }, + { .compatible = "maxim,max7315", .data = OF_953X( 8, PCA_INT), }, + + { .compatible = "ti,pca6107", .data = OF_953X( 8, PCA_INT), }, + { .compatible = "ti,tca6408", .data = OF_953X( 8, PCA_INT), }, + { .compatible = "ti,tca6416", .data = OF_953X(16, PCA_INT), }, + { .compatible = "ti,tca6424", .data = OF_953X(24, PCA_INT), }, + + { .compatible = "onsemi,pca9654", .data = OF_953X( 8, PCA_INT), }, + + { .compatible = "exar,xra1202", .data = OF_953X( 8, 0), }, { } }; -- 2.6.2