linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeffy Chen <jeffy.chen@rock-chips.com>
To: heiko@sntech.de, linux@arm.linux.org.uk,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>,
	devicetree@vger.kernel.org, linux-gpio@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>,
	Kumar Gala <galak@codeaurora.org>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v1 1/8] pinctrl: rockchip: add support for the rk3228
Date: Wed,  9 Dec 2015 17:04:06 +0800	[thread overview]
Message-ID: <1449651853-1667-2-git-send-email-jeffy.chen@rock-chips.com> (raw)
In-Reply-To: <1449651853-1667-1-git-send-email-jeffy.chen@rock-chips.com>

The pinctrl of rk3228 is much the same as rk3288's, but
without pmu.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>

---

 .../bindings/pinctrl/rockchip,pinctrl.txt          |  3 +-
 drivers/pinctrl/pinctrl-rockchip.c                 | 53 ++++++++++++++++++++++
 2 files changed, 55 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
index 391ef4b..0cd701b 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
@@ -21,7 +21,8 @@ defined as gpio sub-nodes of the pinmux controller.
 Required properties for iomux controller:
   - compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl"
 		       "rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl"
-		       "rockchip,rk3288-pinctrl", "rockchip,rk3368-pinctrl"
+		       "rockchip,rk3228-pinctrl", "rockchip,rk3288-pinctrl"
+		       "rockchip,rk3368-pinctrl"
   - rockchip,grf: phandle referencing a syscon providing the
 	 "general register files"
 
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index a065112..faab36e 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -614,6 +614,40 @@ static void rk3288_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
 	}
 }
 
+#define RK3228_PULL_OFFSET		0x100
+
+static void rk3228_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
+				    int pin_num, struct regmap **regmap,
+				    int *reg, u8 *bit)
+{
+	struct rockchip_pinctrl *info = bank->drvdata;
+
+	*regmap = info->regmap_base;
+	*reg = RK3228_PULL_OFFSET;
+	*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
+	*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
+
+	*bit = (pin_num % RK3188_PULL_PINS_PER_REG);
+	*bit *= RK3188_PULL_BITS_PER_PIN;
+}
+
+#define RK3228_DRV_GRF_OFFSET		0x200
+
+static void rk3228_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
+				    int pin_num, struct regmap **regmap,
+				    int *reg, u8 *bit)
+{
+	struct rockchip_pinctrl *info = bank->drvdata;
+
+	*regmap = info->regmap_base;
+	*reg = RK3228_DRV_GRF_OFFSET;
+	*reg += bank->bank_num * RK3288_DRV_BANK_STRIDE;
+	*reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4);
+
+	*bit = (pin_num % RK3288_DRV_PINS_PER_REG);
+	*bit *= RK3288_DRV_BITS_PER_PIN;
+}
+
 #define RK3368_PULL_GRF_OFFSET		0x100
 #define RK3368_PULL_PMU_OFFSET		0x10
 
@@ -2143,6 +2177,23 @@ static struct rockchip_pin_ctrl rk3188_pin_ctrl = {
 		.pull_calc_reg		= rk3188_calc_pull_reg_and_bit,
 };
 
+static struct rockchip_pin_bank rk3228_pin_banks[] = {
+	PIN_BANK(0, 32, "gpio0"),
+	PIN_BANK(1, 32, "gpio1"),
+	PIN_BANK(2, 32, "gpio2"),
+	PIN_BANK(3, 32, "gpio3"),
+};
+
+static struct rockchip_pin_ctrl rk3228_pin_ctrl = {
+		.pin_banks		= rk3228_pin_banks,
+		.nr_banks		= ARRAY_SIZE(rk3228_pin_banks),
+		.label			= "RK3228-GPIO",
+		.type			= RK3288,
+		.grf_mux_offset		= 0x0,
+		.pull_calc_reg		= rk3228_calc_pull_reg_and_bit,
+		.drv_calc_reg		= rk3228_calc_drv_reg_and_bit,
+};
+
 static struct rockchip_pin_bank rk3288_pin_banks[] = {
 	PIN_BANK_IOMUX_FLAGS(0, 24, "gpio0", IOMUX_SOURCE_PMU,
 					     IOMUX_SOURCE_PMU,
@@ -2220,6 +2271,8 @@ static const struct of_device_id rockchip_pinctrl_dt_match[] = {
 		.data = (void *)&rk3066b_pin_ctrl },
 	{ .compatible = "rockchip,rk3188-pinctrl",
 		.data = (void *)&rk3188_pin_ctrl },
+	{ .compatible = "rockchip,rk3228-pinctrl",
+		.data = (void *)&rk3228_pin_ctrl },
 	{ .compatible = "rockchip,rk3288-pinctrl",
 		.data = (void *)&rk3288_pin_ctrl },
 	{ .compatible = "rockchip,rk3368-pinctrl",
-- 
2.1.4

  reply	other threads:[~2015-12-09  9:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-09  9:04 [PATCH v1 0/8] This serial of patches add dts/pinctrl/clock-tree/doc for rk3228 Jeffy Chen
2015-12-09  9:04 ` Jeffy Chen [this message]
2015-12-09 11:30   ` [PATCH v1 1/8] pinctrl: rockchip: add support for the rk3228 Heiko Stübner
2015-12-09 20:09   ` Rob Herring
2015-12-11 18:10   ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1449651853-1667-2-git-send-email-jeffy.chen@rock-chips.com \
    --to=jeffy.chen@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=heiko@sntech.de \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).