From: Linus Walleij <linus.walleij@linaro.org>
To: linux-gpio@vger.kernel.org, Johan Hovold <johan@kernel.org>,
Alexandre Courbot <acourbot@nvidia.com>,
Michael Welling <mwelling@ieee.org>,
Markus Pargmann <mpa@pengutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>, Alban Bedel <albeu@free.fr>
Subject: [PATCH 015/182] gpio: ath79: use gpiochip data pointer
Date: Wed, 9 Dec 2015 14:14:46 +0100 [thread overview]
Message-ID: <1449666886-30451-1-git-send-email-linus.walleij@linaro.org> (raw)
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().
Cc: Alban Bedel <albeu@free.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/gpio/gpio-ath79.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/gpio/gpio-ath79.c b/drivers/gpio/gpio-ath79.c
index e7e38af11ec9..2c208e1d9350 100644
--- a/drivers/gpio/gpio-ath79.c
+++ b/drivers/gpio/gpio-ath79.c
@@ -24,12 +24,10 @@ struct ath79_gpio_ctrl {
spinlock_t lock;
};
-#define to_ath79_gpio_ctrl(c) container_of(c, struct ath79_gpio_ctrl, chip)
-
static void ath79_gpio_set_value(struct gpio_chip *chip,
unsigned gpio, int value)
{
- struct ath79_gpio_ctrl *ctrl = to_ath79_gpio_ctrl(chip);
+ struct ath79_gpio_ctrl *ctrl = gpiochip_get_data(chip);
if (value)
__raw_writel(BIT(gpio), ctrl->base + AR71XX_GPIO_REG_SET);
@@ -39,7 +37,7 @@ static void ath79_gpio_set_value(struct gpio_chip *chip,
static int ath79_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
{
- struct ath79_gpio_ctrl *ctrl = to_ath79_gpio_ctrl(chip);
+ struct ath79_gpio_ctrl *ctrl = gpiochip_get_data(chip);
return (__raw_readl(ctrl->base + AR71XX_GPIO_REG_IN) >> gpio) & 1;
}
@@ -47,7 +45,7 @@ static int ath79_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
static int ath79_gpio_direction_input(struct gpio_chip *chip,
unsigned offset)
{
- struct ath79_gpio_ctrl *ctrl = to_ath79_gpio_ctrl(chip);
+ struct ath79_gpio_ctrl *ctrl = gpiochip_get_data(chip);
unsigned long flags;
spin_lock_irqsave(&ctrl->lock, flags);
@@ -64,7 +62,7 @@ static int ath79_gpio_direction_input(struct gpio_chip *chip,
static int ath79_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
- struct ath79_gpio_ctrl *ctrl = to_ath79_gpio_ctrl(chip);
+ struct ath79_gpio_ctrl *ctrl = gpiochip_get_data(chip);
unsigned long flags;
spin_lock_irqsave(&ctrl->lock, flags);
@@ -85,7 +83,7 @@ static int ath79_gpio_direction_output(struct gpio_chip *chip,
static int ar934x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
- struct ath79_gpio_ctrl *ctrl = to_ath79_gpio_ctrl(chip);
+ struct ath79_gpio_ctrl *ctrl = gpiochip_get_data(chip);
unsigned long flags;
spin_lock_irqsave(&ctrl->lock, flags);
@@ -102,7 +100,7 @@ static int ar934x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
static int ar934x_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
int value)
{
- struct ath79_gpio_ctrl *ctrl = to_ath79_gpio_ctrl(chip);
+ struct ath79_gpio_ctrl *ctrl = gpiochip_get_data(chip);
unsigned long flags;
spin_lock_irqsave(&ctrl->lock, flags);
@@ -184,7 +182,7 @@ static int ath79_gpio_probe(struct platform_device *pdev)
ctrl->chip.direction_output = ar934x_gpio_direction_output;
}
- err = gpiochip_add(&ctrl->chip);
+ err = gpiochip_add_data(&ctrl->chip, ctrl);
if (err) {
dev_err(&pdev->dev,
"cannot add AR71xx GPIO chip, error=%d", err);
--
2.4.3
next reply other threads:[~2015-12-09 13:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-09 13:14 Linus Walleij [this message]
2015-12-09 13:51 ` [PATCH 015/182] gpio: ath79: use gpiochip data pointer Alban
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449666886-30451-1-git-send-email-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=acourbot@nvidia.com \
--cc=albeu@free.fr \
--cc=johan@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=mpa@pengutronix.de \
--cc=mwelling@ieee.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).