linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: linux-gpio@vger.kernel.org, Johan Hovold <johan@kernel.org>,
	Alexandre Courbot <acourbot@nvidia.com>,
	Michael Welling <mwelling@ieee.org>,
	Markus Pargmann <mpa@pengutronix.de>
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
	"Alexander Stein" <alexander.stein@systec-electronic.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Subject: [PATCH 042/182] gpio: mpc8xxx: use gpiochip data pointer
Date: Wed,  9 Dec 2015 14:18:37 +0100	[thread overview]
Message-ID: <1449667117-31740-1-git-send-email-linus.walleij@linaro.org> (raw)

This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpio/gpio-mpc8xxx.c | 23 ++++++++---------------
 1 file changed, 8 insertions(+), 15 deletions(-)

diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index 48ef368347ab..34b6ebe63638 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -49,15 +49,9 @@ static inline u32 mpc8xxx_gpio2mask(unsigned int gpio)
 	return 1u << (MPC8XXX_GPIO_PINS - 1 - gpio);
 }
 
-static inline struct mpc8xxx_gpio_chip *
-to_mpc8xxx_gpio_chip(struct of_mm_gpio_chip *mm)
-{
-	return container_of(mm, struct mpc8xxx_gpio_chip, mm_gc);
-}
-
 static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm)
 {
-	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(&mm->gc);
 
 	mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT);
 }
@@ -71,7 +65,7 @@ static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio)
 {
 	u32 val;
 	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
-	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc);
 	u32 out_mask, out_shadow;
 
 	out_mask = in_be32(mm->regs + GPIO_DIR);
@@ -92,7 +86,7 @@ static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
 static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
-	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc);
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
@@ -111,7 +105,7 @@ static void mpc8xxx_gpio_set_multiple(struct gpio_chip *gc,
 				      unsigned long *mask, unsigned long *bits)
 {
 	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
-	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc);
 	unsigned long flags;
 	int i;
 
@@ -136,7 +130,7 @@ static void mpc8xxx_gpio_set_multiple(struct gpio_chip *gc,
 static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
-	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc);
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
@@ -151,7 +145,7 @@ static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
 static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
-	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc);
 	unsigned long flags;
 
 	mpc8xxx_gpio_set(gc, gpio, val);
@@ -185,8 +179,7 @@ static int mpc5125_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val
 
 static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
 {
-	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
-	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc);
 
 	if (mpc8xxx_gc->irq && offset < MPC8XXX_GPIO_PINS)
 		return irq_create_mapping(mpc8xxx_gc->irq, offset);
@@ -417,7 +410,7 @@ static int mpc8xxx_probe(struct platform_device *pdev)
 	gc->set_multiple = mpc8xxx_gpio_set_multiple;
 	gc->to_irq = mpc8xxx_gpio_to_irq;
 
-	ret = of_mm_gpiochip_add(np, mm_gc);
+	ret = of_mm_gpiochip_add_data(np, mm_gc, mpc8xxx_gc);
 	if (ret)
 		return ret;
 
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2015-12-09 13:18 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-09 13:18 Linus Walleij [this message]
2015-12-09 19:19 ` [PATCH 042/182] gpio: mpc8xxx: use gpiochip data pointer Uwe Kleine-König
2015-12-14  9:25   ` Linus Walleij
2015-12-10  7:05 ` Alexander Stein

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1449667117-31740-1-git-send-email-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=acourbot@nvidia.com \
    --cc=alexander.stein@systec-electronic.com \
    --cc=johan@kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=mpa@pengutronix.de \
    --cc=mwelling@ieee.org \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).