linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: linux-gpio@vger.kernel.org, Johan Hovold <johan@kernel.org>,
	Alexandre Courbot <acourbot@nvidia.com>,
	Michael Welling <mwelling@ieee.org>,
	Markus Pargmann <mpa@pengutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	Tony Lindgren <tony@atomide.com>,
	Santosh Shilimkar <ssantosh@kernel.org>
Subject: [PATCH 046/182] gpio: omap: use gpiochip data pointer
Date: Wed,  9 Dec 2015 14:19:10 +0100	[thread overview]
Message-ID: <1449667150-31930-1-git-send-email-linus.walleij@linaro.org> (raw)

This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpio/gpio-omap.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 7e4f7c5f999a..c764a135048a 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -93,7 +93,7 @@ static void omap_gpio_unmask_irq(struct irq_data *d);
 static inline struct gpio_bank *omap_irq_data_get_bank(struct irq_data *d)
 {
 	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
-	return container_of(chip, struct gpio_bank, chip);
+	return gpiochip_get_data(chip);
 }
 
 static void omap_set_gpio_direction(struct gpio_bank *bank, int gpio,
@@ -661,7 +661,7 @@ static int omap_gpio_wake_enable(struct irq_data *d, unsigned int enable)
 
 static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
 {
-	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
+	struct gpio_bank *bank = gpiochip_get_data(chip);
 	unsigned long flags;
 
 	/*
@@ -681,7 +681,7 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
 
 static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 {
-	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
+	struct gpio_bank *bank = gpiochip_get_data(chip);
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&bank->lock, flags);
@@ -954,7 +954,7 @@ static int omap_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 	void __iomem *reg;
 	int dir;
 
-	bank = container_of(chip, struct gpio_bank, chip);
+	bank = gpiochip_get_data(chip);
 	reg = bank->base + bank->regs->direction;
 	raw_spin_lock_irqsave(&bank->lock, flags);
 	dir = !!(readl_relaxed(reg) & BIT(offset));
@@ -967,7 +967,7 @@ static int omap_gpio_input(struct gpio_chip *chip, unsigned offset)
 	struct gpio_bank *bank;
 	unsigned long flags;
 
-	bank = container_of(chip, struct gpio_bank, chip);
+	bank = gpiochip_get_data(chip);
 	raw_spin_lock_irqsave(&bank->lock, flags);
 	omap_set_gpio_direction(bank, offset, 1);
 	raw_spin_unlock_irqrestore(&bank->lock, flags);
@@ -978,7 +978,7 @@ static int omap_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct gpio_bank *bank;
 
-	bank = container_of(chip, struct gpio_bank, chip);
+	bank = gpiochip_get_data(chip);
 
 	if (omap_gpio_is_input(bank, offset))
 		return omap_get_gpio_datain(bank, offset);
@@ -991,7 +991,7 @@ static int omap_gpio_output(struct gpio_chip *chip, unsigned offset, int value)
 	struct gpio_bank *bank;
 	unsigned long flags;
 
-	bank = container_of(chip, struct gpio_bank, chip);
+	bank = gpiochip_get_data(chip);
 	raw_spin_lock_irqsave(&bank->lock, flags);
 	bank->set_dataout(bank, offset, value);
 	omap_set_gpio_direction(bank, offset, 0);
@@ -1005,7 +1005,7 @@ static int omap_gpio_debounce(struct gpio_chip *chip, unsigned offset,
 	struct gpio_bank *bank;
 	unsigned long flags;
 
-	bank = container_of(chip, struct gpio_bank, chip);
+	bank = gpiochip_get_data(chip);
 
 	raw_spin_lock_irqsave(&bank->lock, flags);
 	omap2_set_gpio_debounce(bank, offset, debounce);
@@ -1019,7 +1019,7 @@ static void omap_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	struct gpio_bank *bank;
 	unsigned long flags;
 
-	bank = container_of(chip, struct gpio_bank, chip);
+	bank = gpiochip_get_data(chip);
 	raw_spin_lock_irqsave(&bank->lock, flags);
 	bank->set_dataout(bank, offset, value);
 	raw_spin_unlock_irqrestore(&bank->lock, flags);
@@ -1098,7 +1098,7 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
 	}
 	bank->chip.ngpio = bank->width;
 
-	ret = gpiochip_add(&bank->chip);
+	ret = gpiochip_add_data(&bank->chip, bank);
 	if (ret) {
 		dev_err(bank->dev, "Could not register gpio chip %d\n", ret);
 		return ret;
-- 
2.4.3


             reply	other threads:[~2015-12-09 13:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-09 13:19 Linus Walleij [this message]
2015-12-09 17:19 ` [PATCH 046/182] gpio: omap: use gpiochip data pointer santosh shilimkar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1449667150-31930-1-git-send-email-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=acourbot@nvidia.com \
    --cc=grygorii.strashko@ti.com \
    --cc=johan@kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=mpa@pengutronix.de \
    --cc=mwelling@ieee.org \
    --cc=ssantosh@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).