From: Linus Walleij <linus.walleij@linaro.org>
To: linux-gpio@vger.kernel.org, Johan Hovold <johan@kernel.org>,
Alexandre Courbot <acourbot@nvidia.com>,
Michael Welling <mwelling@ieee.org>,
Markus Pargmann <mpa@pengutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>, Ken Xue <Ken.Xue@amd.com>
Subject: [PATCH 099/182] pinctrl: amd: use gpiochip data pointer
Date: Wed, 9 Dec 2015 14:31:28 +0100 [thread overview]
Message-ID: <1449667888-2402-1-git-send-email-linus.walleij@linaro.org> (raw)
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().
Cc: Ken Xue <Ken.Xue@amd.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/pinctrl-amd.c | 33 ++++++++++++++-------------------
1 file changed, 14 insertions(+), 19 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index a74b2b0a75e0..657449431301 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -35,16 +35,11 @@
#include "pinctrl-utils.h"
#include "pinctrl-amd.h"
-static inline struct amd_gpio *to_amd_gpio(struct gpio_chip *gc)
-{
- return container_of(gc, struct amd_gpio, gc);
-}
-
static int amd_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
{
unsigned long flags;
u32 pin_reg;
- struct amd_gpio *gpio_dev = to_amd_gpio(gc);
+ struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
spin_lock_irqsave(&gpio_dev->lock, flags);
pin_reg = readl(gpio_dev->base + offset * 4);
@@ -71,7 +66,7 @@ static int amd_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
{
u32 pin_reg;
unsigned long flags;
- struct amd_gpio *gpio_dev = to_amd_gpio(gc);
+ struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
spin_lock_irqsave(&gpio_dev->lock, flags);
pin_reg = readl(gpio_dev->base + offset * 4);
@@ -90,7 +85,7 @@ static int amd_gpio_get_value(struct gpio_chip *gc, unsigned offset)
{
u32 pin_reg;
unsigned long flags;
- struct amd_gpio *gpio_dev = to_amd_gpio(gc);
+ struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
spin_lock_irqsave(&gpio_dev->lock, flags);
pin_reg = readl(gpio_dev->base + offset * 4);
@@ -103,7 +98,7 @@ static void amd_gpio_set_value(struct gpio_chip *gc, unsigned offset, int value)
{
u32 pin_reg;
unsigned long flags;
- struct amd_gpio *gpio_dev = to_amd_gpio(gc);
+ struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
spin_lock_irqsave(&gpio_dev->lock, flags);
pin_reg = readl(gpio_dev->base + offset * 4);
@@ -122,7 +117,7 @@ static int amd_gpio_set_debounce(struct gpio_chip *gc, unsigned offset,
u32 pin_reg;
int ret = 0;
unsigned long flags;
- struct amd_gpio *gpio_dev = to_amd_gpio(gc);
+ struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
spin_lock_irqsave(&gpio_dev->lock, flags);
pin_reg = readl(gpio_dev->base + offset * 4);
@@ -186,7 +181,7 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
u32 pin_reg;
unsigned long flags;
unsigned int bank, i, pin_num;
- struct amd_gpio *gpio_dev = to_amd_gpio(gc);
+ struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
char *level_trig;
char *active_level;
@@ -327,7 +322,7 @@ static void amd_gpio_irq_enable(struct irq_data *d)
u32 pin_reg;
unsigned long flags;
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
- struct amd_gpio *gpio_dev = to_amd_gpio(gc);
+ struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
spin_lock_irqsave(&gpio_dev->lock, flags);
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
@@ -351,7 +346,7 @@ static void amd_gpio_irq_disable(struct irq_data *d)
u32 pin_reg;
unsigned long flags;
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
- struct amd_gpio *gpio_dev = to_amd_gpio(gc);
+ struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
spin_lock_irqsave(&gpio_dev->lock, flags);
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
@@ -366,7 +361,7 @@ static void amd_gpio_irq_mask(struct irq_data *d)
u32 pin_reg;
unsigned long flags;
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
- struct amd_gpio *gpio_dev = to_amd_gpio(gc);
+ struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
spin_lock_irqsave(&gpio_dev->lock, flags);
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
@@ -380,7 +375,7 @@ static void amd_gpio_irq_unmask(struct irq_data *d)
u32 pin_reg;
unsigned long flags;
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
- struct amd_gpio *gpio_dev = to_amd_gpio(gc);
+ struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
spin_lock_irqsave(&gpio_dev->lock, flags);
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
@@ -394,7 +389,7 @@ static void amd_gpio_irq_eoi(struct irq_data *d)
u32 reg;
unsigned long flags;
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
- struct amd_gpio *gpio_dev = to_amd_gpio(gc);
+ struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
spin_lock_irqsave(&gpio_dev->lock, flags);
reg = readl(gpio_dev->base + WAKE_INT_MASTER_REG);
@@ -409,7 +404,7 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
u32 pin_reg;
unsigned long flags;
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
- struct amd_gpio *gpio_dev = to_amd_gpio(gc);
+ struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
spin_lock_irqsave(&gpio_dev->lock, flags);
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
@@ -504,7 +499,7 @@ static void amd_gpio_irq_handler(struct irq_desc *desc)
unsigned long flags;
struct irq_chip *chip = irq_desc_get_chip(desc);
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
- struct amd_gpio *gpio_dev = to_amd_gpio(gc);
+ struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
chained_irq_enter(chip, desc);
/*enable GPIO interrupt again*/
@@ -795,7 +790,7 @@ static int amd_gpio_probe(struct platform_device *pdev)
return PTR_ERR(gpio_dev->pctrl);
}
- ret = gpiochip_add(&gpio_dev->gc);
+ ret = gpiochip_add_data(&gpio_dev->gc, gpio_dev);
if (ret)
goto out1;
--
2.4.3
reply other threads:[~2015-12-09 13:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449667888-2402-1-git-send-email-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=Ken.Xue@amd.com \
--cc=acourbot@nvidia.com \
--cc=johan@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=mpa@pengutronix.de \
--cc=mwelling@ieee.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).