[PATCH 103/182] pinctrl: digicolor: use gpiochip data pointer

[PATCH 103/182] pinctrl: digicolor: use gpiochip data pointer

[Linus Walleij]

This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/pinctrl/pinctrl-digicolor.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-digicolor.c b/drivers/pinctrl/pinctrl-digicolor.c
index d8efb2ccac6c..f1343d6ca823 100644
--- a/drivers/pinctrl/pinctrl-digicolor.c
+++ b/drivers/pinctrl/pinctrl-digicolor.c
@@ -171,7 +171,7 @@ static struct pinmux_ops dc_pmxops = {
 
 static int dc_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
 {
-	struct dc_pinmap *pmap = container_of(chip, struct dc_pinmap, chip);
+	struct dc_pinmap *pmap = gpiochip_get_data(chip);
 	int reg_off = GP_DRIVE0(gpio/PINS_PER_COLLECTION);
 	int bit_off = gpio % PINS_PER_COLLECTION;
 	u8 drive;
@@ -191,7 +191,7 @@ static void dc_gpio_set(struct gpio_chip *chip, unsigned gpio, int value);
 static int dc_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
 				    int value)
 {
-	struct dc_pinmap *pmap = container_of(chip, struct dc_pinmap, chip);
+	struct dc_pinmap *pmap = gpiochip_get_data(chip);
 	int reg_off = GP_DRIVE0(gpio/PINS_PER_COLLECTION);
 	int bit_off = gpio % PINS_PER_COLLECTION;
 	u8 drive;
@@ -210,7 +210,7 @@ static int dc_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
 
 static int dc_gpio_get(struct gpio_chip *chip, unsigned gpio)
 {
-	struct dc_pinmap *pmap = container_of(chip, struct dc_pinmap, chip);
+	struct dc_pinmap *pmap = gpiochip_get_data(chip);
 	int reg_off = GP_INPUT(gpio/PINS_PER_COLLECTION);
 	int bit_off = gpio % PINS_PER_COLLECTION;
 	u8 input;
@@ -222,7 +222,7 @@ static int dc_gpio_get(struct gpio_chip *chip, unsigned gpio)
 
 static void dc_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
 {
-	struct dc_pinmap *pmap = container_of(chip, struct dc_pinmap, chip);
+	struct dc_pinmap *pmap = gpiochip_get_data(chip);
 	int reg_off = GP_OUTPUT0(gpio/PINS_PER_COLLECTION);
 	int bit_off = gpio % PINS_PER_COLLECTION;
 	u8 output;
@@ -258,7 +258,7 @@ static int dc_gpiochip_add(struct dc_pinmap *pmap, struct device_node *np)
 
 	spin_lock_init(&pmap->lock);
 
-	ret = gpiochip_add(chip);
+	ret = gpiochip_add_data(chip, pmap);
 	if (ret < 0)
 		return ret;
 
-- 
2.4.3

Re: [PATCH 103/182] pinctrl: digicolor: use gpiochip data pointer

[Baruch Siach]

Hi Linus,

On Wed, Dec 09, 2015 at 02:32:01PM +0100, Linus Walleij wrote:
> This makes the driver use the data pointer added to the gpio_chip
> to store a pointer to the state container instead of relying on
> container_of().
> 
> Cc: Baruch Siach <baruch@tkos.co.il>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Acked-by: Baruch Siach <baruch@tkos.co.il>

Thanks,
baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -