linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: linux-gpio@vger.kernel.org, Johan Hovold <johan@kernel.org>,
	Alexandre Courbot <acourbot@nvidia.com>,
	Michael Welling <mwelling@ieee.org>,
	Markus Pargmann <mpa@pengutronix.de>,
	Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH 164/182] mfd: htc-i2cpld: use gpiochip data pointer
Date: Wed,  9 Dec 2015 14:47:45 +0100	[thread overview]
Message-ID: <1449668865-6307-1-git-send-email-linus.walleij@linaro.org> (raw)

This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Lee please ACK this so I can take it through the GPIO tree.
---
 drivers/mfd/htc-i2cpld.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/mfd/htc-i2cpld.c b/drivers/mfd/htc-i2cpld.c
index bd6b96d07ab8..3f9eee5f8fb9 100644
--- a/drivers/mfd/htc-i2cpld.c
+++ b/drivers/mfd/htc-i2cpld.c
@@ -227,8 +227,7 @@ static irqreturn_t htcpld_handler(int irq, void *dev)
 static void htcpld_chip_set(struct gpio_chip *chip, unsigned offset, int val)
 {
 	struct i2c_client *client;
-	struct htcpld_chip *chip_data =
-		container_of(chip, struct htcpld_chip, chip_out);
+	struct htcpld_chip *chip_data = gpiochip_get_data(chip);
 	unsigned long flags;
 
 	client = chip_data->client;
@@ -257,14 +256,12 @@ static void htcpld_chip_set_ni(struct work_struct *work)
 
 static int htcpld_chip_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct htcpld_chip *chip_data;
+	struct htcpld_chip *chip_data = gpiochip_get_data(chip);
 	u8 cache;
 
 	if (!strncmp(chip->label, "htcpld-out", 10)) {
-		chip_data = container_of(chip, struct htcpld_chip, chip_out);
 		cache = chip_data->cache_out;
 	} else if (!strncmp(chip->label, "htcpld-in", 9)) {
-		chip_data = container_of(chip, struct htcpld_chip, chip_in);
 		cache = chip_data->cache_in;
 	} else
 		return -EINVAL;
@@ -291,9 +288,7 @@ static int htcpld_direction_input(struct gpio_chip *chip,
 
 static int htcpld_chip_to_irq(struct gpio_chip *chip, unsigned offset)
 {
-	struct htcpld_chip *chip_data;
-
-	chip_data = container_of(chip, struct htcpld_chip, chip_in);
+	struct htcpld_chip *chip_data = gpiochip_get_data(chip);
 
 	if (offset < chip_data->nirqs)
 		return chip_data->irq_start + offset;
@@ -451,14 +446,14 @@ static int htcpld_register_chip_gpio(
 	gpio_chip->ngpio           = plat_chip_data->num_gpios;
 
 	/* Add the GPIO chips */
-	ret = gpiochip_add(&(chip->chip_out));
+	ret = gpiochip_add_data(&(chip->chip_out), chip);
 	if (ret) {
 		dev_warn(dev, "Unable to register output GPIOs for 0x%x: %d\n",
 			 plat_chip_data->addr, ret);
 		return ret;
 	}
 
-	ret = gpiochip_add(&(chip->chip_in));
+	ret = gpiochip_add_data(&(chip->chip_in), chip);
 	if (ret) {
 		dev_warn(dev, "Unable to register input GPIOs for 0x%x: %d\n",
 			 plat_chip_data->addr, ret);
-- 
2.4.3


             reply	other threads:[~2015-12-09 13:47 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-09 13:47 Linus Walleij [this message]
2015-12-10 10:35 ` [PATCH 164/182] mfd: htc-i2cpld: use gpiochip data pointer Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1449668865-6307-1-git-send-email-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=acourbot@nvidia.com \
    --cc=johan@kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=mpa@pengutronix.de \
    --cc=mwelling@ieee.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).