linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: linux-gpio@vger.kernel.org, Johan Hovold <johan@kernel.org>,
	Alexandre Courbot <acourbot@nvidia.com>,
	Michael Welling <mwelling@ieee.org>,
	Markus Pargmann <mpa@pengutronix.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>, Jiri Slaby <jslaby@suse.com>
Subject: [PATCH 173/182] serial: max310x: use gpiochip data pointer
Date: Wed,  9 Dec 2015 14:50:16 +0100	[thread overview]
Message-ID: <1449669016-6882-1-git-send-email-linus.walleij@linaro.org> (raw)

This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Greg, please ACK this so I can take it through the GPIO tree.
---
 drivers/tty/serial/max310x.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 3f98165b479c..3f6e0ab725fe 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -17,7 +17,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -1036,7 +1036,7 @@ static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume);
 static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	unsigned int val;
-	struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+	struct max310x_port *s = gpiochip_get_data(chip);
 	struct uart_port *port = &s->p[offset / 4].port;
 
 	val = max310x_port_read(port, MAX310X_GPIODATA_REG);
@@ -1046,7 +1046,7 @@ static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset)
 
 static void max310x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+	struct max310x_port *s = gpiochip_get_data(chip);
 	struct uart_port *port = &s->p[offset / 4].port;
 
 	max310x_port_update(port, MAX310X_GPIODATA_REG, 1 << (offset % 4),
@@ -1055,7 +1055,7 @@ static void max310x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 
 static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
-	struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+	struct max310x_port *s = gpiochip_get_data(chip);
 	struct uart_port *port = &s->p[offset / 4].port;
 
 	max310x_port_update(port, MAX310X_GPIOCFG_REG, 1 << (offset % 4), 0);
@@ -1066,7 +1066,7 @@ static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 static int max310x_gpio_direction_output(struct gpio_chip *chip,
 					 unsigned offset, int value)
 {
-	struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+	struct max310x_port *s = gpiochip_get_data(chip);
 	struct uart_port *port = &s->p[offset / 4].port;
 
 	max310x_port_update(port, MAX310X_GPIODATA_REG, 1 << (offset % 4),
@@ -1183,7 +1183,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
 	s->gpio.base		= -1;
 	s->gpio.ngpio		= devtype->nr * 4;
 	s->gpio.can_sleep	= 1;
-	ret = gpiochip_add(&s->gpio);
+	ret = gpiochip_add_data(&s->gpio, s);
 	if (ret)
 		goto out_uart;
 #endif
-- 
2.4.3


             reply	other threads:[~2015-12-09 13:50 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-09 13:50 Linus Walleij [this message]
2016-02-07  7:20 ` [PATCH 173/182] serial: max310x: use gpiochip data pointer Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1449669016-6882-1-git-send-email-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=acourbot@nvidia.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=johan@kernel.org \
    --cc=jslaby@suse.com \
    --cc=linux-gpio@vger.kernel.org \
    --cc=mpa@pengutronix.de \
    --cc=mwelling@ieee.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).