linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: linux-gpio@vger.kernel.org, Johan Hovold <johan@kernel.org>,
	Alexandre Courbot <acourbot@nvidia.com>,
	Michael Welling <mwelling@ieee.org>,
	Markus Pargmann <mpa@pengutronix.de>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Bard Liao <bardliao@realtek.com>,
	Oder Chiou <oder_chiou@realtek.com>,
	alsa-devel@alsa-project.org
Subject: [PATCH 176/182] ASoC: rt5677: use gpiochip data pointer
Date: Wed,  9 Dec 2015 14:51:19 +0100	[thread overview]
Message-ID: <1449669079-7119-1-git-send-email-linus.walleij@linaro.org> (raw)

This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: Bard Liao <bardliao@realtek.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Liam/Mark: please ACK this so I can merge it into the GPIO tree.
---
 sound/soc/codecs/rt5677.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index 1f590b5a6718..89dda8962c7c 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -4500,14 +4500,9 @@ static int rt5677_set_bias_level(struct snd_soc_codec *codec,
 }
 
 #ifdef CONFIG_GPIOLIB
-static inline struct rt5677_priv *gpio_to_rt5677(struct gpio_chip *chip)
-{
-	return container_of(chip, struct rt5677_priv, gpio_chip);
-}
-
 static void rt5677_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	struct rt5677_priv *rt5677 = gpio_to_rt5677(chip);
+	struct rt5677_priv *rt5677 = gpiochip_get_data(chip);
 
 	switch (offset) {
 	case RT5677_GPIO1 ... RT5677_GPIO5:
@@ -4528,7 +4523,7 @@ static void rt5677_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 static int rt5677_gpio_direction_out(struct gpio_chip *chip,
 				     unsigned offset, int value)
 {
-	struct rt5677_priv *rt5677 = gpio_to_rt5677(chip);
+	struct rt5677_priv *rt5677 = gpiochip_get_data(chip);
 
 	switch (offset) {
 	case RT5677_GPIO1 ... RT5677_GPIO5:
@@ -4552,7 +4547,7 @@ static int rt5677_gpio_direction_out(struct gpio_chip *chip,
 
 static int rt5677_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct rt5677_priv *rt5677 = gpio_to_rt5677(chip);
+	struct rt5677_priv *rt5677 = gpiochip_get_data(chip);
 	int value, ret;
 
 	ret = regmap_read(rt5677->regmap, RT5677_GPIO_ST, &value);
@@ -4564,7 +4559,7 @@ static int rt5677_gpio_get(struct gpio_chip *chip, unsigned offset)
 
 static int rt5677_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
 {
-	struct rt5677_priv *rt5677 = gpio_to_rt5677(chip);
+	struct rt5677_priv *rt5677 = gpiochip_get_data(chip);
 
 	switch (offset) {
 	case RT5677_GPIO1 ... RT5677_GPIO5:
@@ -4618,7 +4613,7 @@ static void rt5677_gpio_config(struct rt5677_priv *rt5677, unsigned offset,
 
 static int rt5677_to_irq(struct gpio_chip *chip, unsigned offset)
 {
-	struct rt5677_priv *rt5677 = gpio_to_rt5677(chip);
+	struct rt5677_priv *rt5677 = gpiochip_get_data(chip);
 	struct regmap_irq_chip_data *data = rt5677->irq_data;
 	int irq;
 
@@ -4677,7 +4672,7 @@ static void rt5677_init_gpio(struct i2c_client *i2c)
 	rt5677->gpio_chip.parent = &i2c->dev;
 	rt5677->gpio_chip.base = -1;
 
-	ret = gpiochip_add(&rt5677->gpio_chip);
+	ret = gpiochip_add_data(&rt5677->gpio_chip, rt5677);
 	if (ret != 0)
 		dev_err(&i2c->dev, "Failed to add GPIOs: %d\n", ret);
 }
-- 
2.4.3


             reply	other threads:[~2015-12-09 13:51 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-09 13:51 Linus Walleij [this message]
2015-12-12 22:48 ` [PATCH 176/182] ASoC: rt5677: use gpiochip data pointer Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1449669079-7119-1-git-send-email-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=acourbot@nvidia.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=bardliao@realtek.com \
    --cc=broonie@kernel.org \
    --cc=johan@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-gpio@vger.kernel.org \
    --cc=mpa@pengutronix.de \
    --cc=mwelling@ieee.org \
    --cc=oder_chiou@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).