From: Chen-Yu Tsai <wens@csie.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Chen-Yu Tsai <wens@wens.tw>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Rob Herring <robh+dt@kernel.org>,
linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Chen-Yu Tsai <wens@csie.org>
Subject: [PATCH resend] pinctrl: sunxi: Add A80 special pin controller
Date: Thu, 17 Dec 2015 00:39:42 +0800 [thread overview]
Message-ID: <1450283982-25295-1-git-send-email-wens@csie.org> (raw)
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Like the previous designs, the A80 has a special pin controller for the
critical pins, like the PMIC bus.
Add a driver for this controller.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[wens: Add A80 compatible strings to bindings doc; fix pin function
names based on v1.3 datasheet; constify of_device_id table]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
---
Linus, can we have this one included for 4.5?
Thanks
---
.../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 2 +
drivers/pinctrl/sunxi/Kconfig | 5 +
drivers/pinctrl/sunxi/Makefile | 1 +
drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c | 181 +++++++++++++++++++++
4 files changed, 189 insertions(+)
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index b321b26780dc..b3b6c2f210d7 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -18,6 +18,8 @@ Required properties:
"allwinner,sun8i-a23-r-pinctrl"
"allwinner,sun8i-a33-pinctrl"
"allwinner,sun8i-a83t-pinctrl"
+ "allwinner,sun9i-a80-pinctrl"
+ "allwinner,sun9i-a80-r-pinctrl"
- reg: Should contain the register physical address and length for the
pin controller.
diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index e68fd951129a..0252b3fa41ce 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -55,4 +55,9 @@ config PINCTRL_SUN9I_A80
def_bool MACH_SUN9I
select PINCTRL_SUNXI_COMMON
+config PINCTRL_SUN9I_A80_R
+ def_bool MACH_SUN9I
+ depends on RESET_CONTROLLER
+ select PINCTRL_SUNXI_COMMON
+
endif
diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
index e08029034510..0b4b827f314b 100644
--- a/drivers/pinctrl/sunxi/Makefile
+++ b/drivers/pinctrl/sunxi/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o
obj-$(CONFIG_PINCTRL_SUN8I_A33) += pinctrl-sun8i-a33.o
obj-$(CONFIG_PINCTRL_SUN8I_A83T) += pinctrl-sun8i-a83t.o
obj-$(CONFIG_PINCTRL_SUN9I_A80) += pinctrl-sun9i-a80.o
+obj-$(CONFIG_PINCTRL_SUN9I_A80_R) += pinctrl-sun9i-a80-r.o
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c
new file mode 100644
index 000000000000..42547ffa20a8
--- /dev/null
+++ b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c
@@ -0,0 +1,181 @@
+/*
+ * Allwinner A80 SoCs special pins pinctrl driver.
+ *
+ * Copyright (C) 2014 Maxime Ripard
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/reset.h>
+
+#include "pinctrl-sunxi.h"
+
+static const struct sunxi_desc_pin sun9i_a80_r_pins[] = {
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 0),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "s_uart"), /* TX */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* PL_EINT0 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 1),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "s_uart"), /* RX */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)), /* PL_EINT1 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 2),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "s_jtag"), /* TMS */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)), /* PL_EINT2 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 3),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "s_jtag"), /* TCK */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)), /* PL_EINT3 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 4),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "s_jtag"), /* TDO */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)), /* PL_EINT4 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 5),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "s_jtag"), /* TDI */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)), /* PL_EINT5 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 6),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "s_cir_rx"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)), /* PL_EINT6 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 7),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "1wire"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)), /* PL_EINT7 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 8),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_ps2"), /* SCK1 */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)), /* PL_EINT8 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 9),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_ps2"), /* SDA1 */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)), /* PL_EINT9 */
+
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(M, 0),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 0)), /* PM_EINT0 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(M, 1),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 1)), /* PM_EINT1 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(M, 2),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 2)), /* PM_EINT2 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(M, 3),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 3)), /* PM_EINT3 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(M, 4),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "s_i2s1"), /* LRCKR */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 4)), /* PM_EINT4 */
+
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(M, 8),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "s_i2c1"), /* SCK */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 8)), /* PM_EINT8 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(M, 9),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "s_i2c1"), /* SDA */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 9)), /* PM_EINT9 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(M, 10),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_i2s0"), /* MCLK */
+ SUNXI_FUNCTION(0x3, "s_i2s1")), /* MCLK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(M, 11),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_i2s0"), /* BCLK */
+ SUNXI_FUNCTION(0x3, "s_i2s1")), /* BCLK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(M, 12),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_i2s0"), /* LRCK */
+ SUNXI_FUNCTION(0x3, "s_i2s1")), /* LRCK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(M, 13),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_i2s0"), /* DIN */
+ SUNXI_FUNCTION(0x3, "s_i2s1")), /* DIN */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(M, 14),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_i2s0"), /* DOUT */
+ SUNXI_FUNCTION(0x3, "s_i2s1")), /* DOUT */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(M, 15),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 15)), /* PM_EINT15 */
+
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(N, 0),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_i2c0"), /* SCK */
+ SUNXI_FUNCTION(0x3, "s_rsb")), /* SCK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(N, 1),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_i2c0"), /* SDA */
+ SUNXI_FUNCTION(0x3, "s_rsb")), /* SDA */
+};
+
+static const struct sunxi_pinctrl_desc sun9i_a80_r_pinctrl_data = {
+ .pins = sun9i_a80_r_pins,
+ .npins = ARRAY_SIZE(sun9i_a80_r_pins),
+ .pin_base = PL_BASE,
+ .irq_banks = 2,
+};
+
+static int sun9i_a80_r_pinctrl_probe(struct platform_device *pdev)
+{
+ return sunxi_pinctrl_init(pdev,
+ &sun9i_a80_r_pinctrl_data);
+}
+
+static const struct of_device_id sun9i_a80_r_pinctrl_match[] = {
+ { .compatible = "allwinner,sun9i-a80-r-pinctrl", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sun9i_a80_r_pinctrl_match);
+
+static struct platform_driver sun9i_a80_r_pinctrl_driver = {
+ .probe = sun9i_a80_r_pinctrl_probe,
+ .driver = {
+ .name = "sun9i-a80-r-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = sun9i_a80_r_pinctrl_match,
+ },
+};
+module_platform_driver(sun9i_a80_r_pinctrl_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
+MODULE_DESCRIPTION("Allwinner A80 R_PIO pinctrl driver");
+MODULE_LICENSE("GPL");
--
2.6.4
next reply other threads:[~2015-12-16 16:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-16 16:39 Chen-Yu Tsai [this message]
2015-12-22 9:29 ` [PATCH resend] pinctrl: sunxi: Add A80 special pin controller Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450283982-25295-1-git-send-email-wens@csie.org \
--to=wens@csie.org \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=wens@wens.tw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).