From: Maxime Coquelin <mcoquelin.stm32@gmail.com>
To: patrice.chotard@st.com, Linus Walleij <linus.walleij@linaro.org>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
linux-gpio@vger.kernel.org, arnd@arndb.de
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, afaerber@suse.de,
devicetree@vger.kernel.org,
Daniel Thompson <daniel.thompson@linaro.org>,
bruherrera@gmail.com
Subject: [PATCH v4 6/9] ARM: dts: Add pinctrl node to STM32F429
Date: Thu, 14 Jan 2016 13:16:32 +0100 [thread overview]
Message-ID: <1452773795-24216-7-git-send-email-mcoquelin.stm32@gmail.com> (raw)
In-Reply-To: <1452773795-24216-1-git-send-email-mcoquelin.stm32@gmail.com>
The STM32F429 MCU has 11 GPIO banks, with 16 pins per bank.
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
arch/arm/boot/dts/stm32f429.dtsi | 97 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 5e1e234..62d2b3d 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -46,6 +46,7 @@
*/
#include "armv7-m.dtsi"
+#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
/ {
clocks {
@@ -168,6 +169,102 @@
status = "disabled";
};
+ pin-controller {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32f429-pinctrl";
+ ranges = <0 0x40020000 0x3000>;
+ pins-are-numbered;
+
+ gpioa: gpio@40020000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc 0 256>;
+ st,bank-name = "GPIOA";
+ };
+
+ gpiob: gpio@40020400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x400 0x400>;
+ clocks = <&rcc 0 257>;
+ st,bank-name = "GPIOB";
+ };
+
+ gpioc: gpio@40020800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x800 0x400>;
+ clocks = <&rcc 0 258>;
+ st,bank-name = "GPIOC";
+ };
+
+ gpiod: gpio@40020c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0xc00 0x400>;
+ clocks = <&rcc 0 259>;
+ st,bank-name = "GPIOD";
+ };
+
+ gpioe: gpio@40021000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc 0 260>;
+ st,bank-name = "GPIOE";
+ };
+
+ gpiof: gpio@40021400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1400 0x400>;
+ clocks = <&rcc 0 261>;
+ st,bank-name = "GPIOF";
+ };
+
+ gpiog: gpio@40021800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1800 0x400>;
+ clocks = <&rcc 0 262>;
+ st,bank-name = "GPIOG";
+ };
+
+ gpioh: gpio@40021c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1c00 0x400>;
+ clocks = <&rcc 0 263>;
+ st,bank-name = "GPIOH";
+ };
+
+ gpioi: gpio@40022000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc 0 264>;
+ st,bank-name = "GPIOI";
+ };
+
+ gpioj: gpio@40022400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2400 0x400>;
+ clocks = <&rcc 0 265>;
+ st,bank-name = "GPIOJ";
+ };
+
+ gpiok: gpio@40022800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2800 0x400>;
+ clocks = <&rcc 0 266>;
+ st,bank-name = "GPIOK";
+ };
+ };
+
rcc: rcc@40023810 {
#clock-cells = <2>;
compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
--
1.9.1
next prev parent reply other threads:[~2016-01-14 12:16 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-14 12:16 [PATCH v4 0/9] Add STM32 pinctrl/GPIO driver Maxime Coquelin
2016-01-14 12:16 ` [PATCH v4 1/9] ARM: Kconfig: Introduce MACH_STM32F429 flag Maxime Coquelin
2016-01-14 12:16 ` [PATCH v4 2/9] Documentation: dt-bindings: Document STM32 pinctrl driver DT bindings Maxime Coquelin
2016-01-15 2:59 ` Rob Herring
2016-01-27 13:18 ` Linus Walleij
2016-01-14 12:16 ` [PATCH v4 3/9] includes: dt-bindings: Add STM32F429 pinctrl " Maxime Coquelin
2016-01-14 12:16 ` [PATCH v4 4/9] pinctrl: Add STM32 MCUs support Maxime Coquelin
[not found] ` <1452773795-24216-5-git-send-email-mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-01-27 13:16 ` Linus Walleij
2016-02-01 10:21 ` Arnd Bergmann
2016-02-01 10:39 ` Maxime Coquelin
2016-02-01 12:09 ` Maxime Coquelin
2016-02-13 14:48 ` Linus Walleij
2016-02-13 17:14 ` Maxime Coquelin
2016-01-14 12:16 ` [PATCH v4 5/9] ARM: mach-stm32: Select pinctrl Maxime Coquelin
2016-01-14 12:16 ` Maxime Coquelin [this message]
2016-01-14 12:16 ` [PATCH v4 7/9] ARM: dts: Add USART1 pin config to STM32F429 boards Maxime Coquelin
2016-01-14 12:16 ` [PATCH v4 8/9] ARM: dts: Add leds support " Maxime Coquelin
[not found] ` <1452773795-24216-1-git-send-email-mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-01-14 12:16 ` [PATCH v4 9/9] ARM: config: Enable GPIO Led driver in stm32_defconfig Maxime Coquelin
2016-01-27 13:20 ` [PATCH v4 0/9] Add STM32 pinctrl/GPIO driver Linus Walleij
[not found] ` <CACRpkdYGQ1xObWfka2CN9au6YMGhpu4qcTZpu72bzuJjO38tog-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-01-27 17:00 ` Maxime Coquelin
2016-01-27 20:59 ` Maxime Coquelin
2016-02-05 22:50 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452773795-24216-7-git-send-email-mcoquelin.stm32@gmail.com \
--to=mcoquelin.stm32@gmail.com \
--cc=afaerber@suse.de \
--cc=arnd@arndb.de \
--cc=bruherrera@gmail.com \
--cc=daniel.thompson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=patrice.chotard@st.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).