[PATCH v7 0/3] Enable X-Gene standby GPIO as interrupt controller

[PATCH v7 0/3] Enable X-Gene standby GPIO as interrupt controller

[Quan Nguyen]

V7 Changes:
	- Update Documentation
V6 Changes:
        - Remove redundant irq_ack and irq_shutdown entries
V5 Changes:
        - Add optional properties to describe HW specifics
        - Use irq_create_fwspec_mapping() instead of low level functions
        - Move gpiochip_lock_as_irq() to activate method
        - Remove redundant checks
        - Add optional HW properties description to DT binding document
        - Update "interrupts" property description in DT binding document.
V4 Changes:
        - Convert to hierarchical irq domain
V3 Changes:
        - Picking up from version 2 of "Y Vo <yvo@apm.com>"
        - Get HW resource information from DT
        - Avoid keeping parent IRQ controller
V2 Changes:
        - Support X-Gene standby GPIO as an interrupt controller.

Quan Nguyen (3):
  gpio: xgene: Enable X-Gene standby GPIO as interrupt controller
  Documentation: gpio: Update description for X-Gene standby GPIO
    controller DTS binding
  arm64: dts: Update X-Gene standby GPIO controller DTS entries

 .../devicetree/bindings/gpio/gpio-xgene-sb.txt     |  47 +++-
 arch/arm64/boot/dts/apm/apm-storm.dtsi             |   3 +
 drivers/gpio/gpio-xgene-sb.c                       | 265 ++++++++++++++++++---
 3 files changed, 276 insertions(+), 39 deletions(-)

-- 
1.7.12.4

[PATCH v7 1/3] gpio: xgene: Enable X-Gene standby GPIO as interrupt controller

[Quan Nguyen]

Enable X-Gene standby GPIO controller as interrupt controller to provide
its own resources. This avoids ambiguity where GIC interrupt resource is
use as X-Gene standby GPIO interrupt resource in user driver.

Signed-off-by: Y Vo <yvo@apm.com>
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
 drivers/gpio/gpio-xgene-sb.c | 265 +++++++++++++++++++++++++++++++++++++------
 1 file changed, 233 insertions(+), 32 deletions(-)

diff --git a/drivers/gpio/gpio-xgene-sb.c b/drivers/gpio/gpio-xgene-sb.c
index 282004d..b993b86 100644
--- a/drivers/gpio/gpio-xgene-sb.c
+++ b/drivers/gpio/gpio-xgene-sb.c
@@ -2,8 +2,9 @@
  * AppliedMicro X-Gene SoC GPIO-Standby Driver
  *
  * Copyright (c) 2014, Applied Micro Circuits Corporation
- * Author: 	Tin Huynh <tnhuynh@apm.com>.
- * 		Y Vo <yvo@apm.com>.
+ * Author:	Tin Huynh <tnhuynh@apm.com>.
+ *		Y Vo <yvo@apm.com>.
+ *		Quan Nguyen <qnguyen@apm.com>.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -28,9 +29,14 @@
 
 #include "gpiolib.h"
 
-#define XGENE_MAX_GPIO_DS		22
-#define XGENE_MAX_GPIO_DS_IRQ		6
+/* Common property names */
+#define XGENE_NIRQ_PROPERTY		"apm,nr-irqs"
+#define XGENE_NGPIO_PROPERTY		"apm,nr-gpios"
+#define XGENE_IRQ_START_PROPERTY	"apm,irq-start"
 
+#define XGENE_DFLT_MAX_NGPIO		22
+#define XGENE_DFLT_MAX_NIRQ		6
+#define XGENE_DFLT_IRQ_START_PIN	8
 #define GPIO_MASK(x)			(1U << ((x) % 32))
 
 #define MPA_GPIO_INT_LVL		0x0290
@@ -39,19 +45,32 @@
 #define MPA_GPIO_IN_ADDR 		0x02a4
 #define MPA_GPIO_SEL_LO 		0x0294
 
+#define GPIO_INT_LEVEL_H	0x000001
+#define GPIO_INT_LEVEL_L	0x000000
+
 /**
  * struct xgene_gpio_sb - GPIO-Standby private data structure.
  * @gc:				memory-mapped GPIO controllers.
- * @irq:			Mapping GPIO pins and interrupt number
- * nirq:			Number of GPIO pins that supports interrupt
+ * @regs:			GPIO register base offset
+ * @irq_domain:			GPIO interrupt domain
+ * @irq_start:			GPIO pin that start support interrupt
+ * @nirq:			Number of GPIO pins that supports interrupt
+ * @parent_irq_base:		Start parent HWIRQ
  */
 struct xgene_gpio_sb {
 	struct gpio_chip	gc;
-	u32 *irq;
-	u32 nirq;
+	void __iomem		*regs;
+	struct irq_domain	*irq_domain;
+	u16			irq_start;
+	u16			nirq;
+	u16			parent_irq_base;
 };
 
-static void xgene_gpio_set_bit(struct gpio_chip *gc, void __iomem *reg, u32 gpio, int val)
+#define HWIRQ_TO_GPIO(priv, hwirq) ((hwirq) + (priv)->irq_start)
+#define GPIO_TO_HWIRQ(priv, gpio) ((gpio) - (priv)->irq_start)
+
+static void xgene_gpio_set_bit(struct gpio_chip *gc,
+				void __iomem *reg, u32 gpio, int val)
 {
 	u32 data;
 
@@ -63,23 +82,170 @@ static void xgene_gpio_set_bit(struct gpio_chip *gc, void __iomem *reg, u32 gpio
 	gc->write_reg(reg, data);
 }
 
-static int apm_gpio_sb_to_irq(struct gpio_chip *gc, u32 gpio)
+static int xgene_gpio_sb_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct xgene_gpio_sb *priv = irq_data_get_irq_chip_data(d);
+	int gpio = HWIRQ_TO_GPIO(priv, d->hwirq);
+	int lvl_type = GPIO_INT_LEVEL_H;
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_LEVEL_HIGH:
+		lvl_type = GPIO_INT_LEVEL_H;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_LEVEL_LOW:
+		lvl_type = GPIO_INT_LEVEL_L;
+		break;
+	default:
+		break;
+	}
+
+	xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO,
+			gpio * 2, 1);
+	xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_INT_LVL,
+			d->hwirq, lvl_type);
+
+	/* Propagate IRQ type setting to parent */
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		return irq_chip_set_type_parent(d, IRQ_TYPE_EDGE_RISING);
+	else
+		return irq_chip_set_type_parent(d, IRQ_TYPE_LEVEL_HIGH);
+}
+
+static struct irq_chip xgene_gpio_sb_irq_chip = {
+	.name           = "sbgpio",
+	.irq_eoi	= irq_chip_eoi_parent,
+	.irq_mask       = irq_chip_mask_parent,
+	.irq_unmask     = irq_chip_unmask_parent,
+	.irq_set_type   = xgene_gpio_sb_irq_set_type,
+};
+
+static int xgene_gpio_sb_to_irq(struct gpio_chip *gc, u32 gpio)
 {
 	struct xgene_gpio_sb *priv = gpiochip_get_data(gc);
+	struct irq_fwspec fwspec;
+
+	if ((gpio < priv->irq_start) ||
+			(gpio > HWIRQ_TO_GPIO(priv, priv->nirq)))
+		return -ENXIO;
+
+	if (gc->parent->of_node)
+		fwspec.fwnode = of_node_to_fwnode(gc->parent->of_node);
+	else
+		fwspec.fwnode = gc->parent->fwnode;
+	fwspec.param_count = 2;
+	fwspec.param[0] = GPIO_TO_HWIRQ(priv, gpio);
+	fwspec.param[1] = IRQ_TYPE_NONE;
+	return irq_create_fwspec_mapping(&fwspec);
+}
+
+static void xgene_gpio_sb_domain_activate(struct irq_domain *d,
+		struct irq_data *irq_data)
+{
+	struct xgene_gpio_sb *priv = d->host_data;
+	u32 gpio = HWIRQ_TO_GPIO(priv, irq_data->hwirq);
+
+	if (gpiochip_lock_as_irq(&priv->gc, gpio)) {
+		dev_err(priv->gc.parent,
+		"Unable to configure XGene GPIO standby pin %d as IRQ\n",
+				gpio);
+		return;
+	}
+
+	xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO,
+			gpio * 2, 1);
+}
+
+static void xgene_gpio_sb_domain_deactivate(struct irq_domain *d,
+		struct irq_data *irq_data)
+{
+	struct xgene_gpio_sb *priv = d->host_data;
+	u32 gpio = HWIRQ_TO_GPIO(priv, irq_data->hwirq);
+
+	gpiochip_unlock_as_irq(&priv->gc, gpio);
+	xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO,
+			gpio * 2, 0);
+}
+
+static int xgene_gpio_sb_domain_translate(struct irq_domain *d,
+		struct irq_fwspec *fwspec,
+		unsigned long *hwirq,
+		unsigned int *type)
+{
+	struct xgene_gpio_sb *priv = d->host_data;
 
-	if (priv->irq[gpio])
-		return priv->irq[gpio];
+	if ((fwspec->param_count != 2) ||
+		(fwspec->param[0] >= priv->nirq))
+		return -EINVAL;
+	*hwirq = fwspec->param[0];
+	*type = fwspec->param[1];
+	return 0;
+}
+
+static int xgene_gpio_sb_domain_alloc(struct irq_domain *domain,
+					unsigned int virq,
+					unsigned int nr_irqs, void *data)
+{
+	struct irq_fwspec *fwspec = data;
+	struct irq_fwspec parent_fwspec;
+	struct xgene_gpio_sb *priv = domain->host_data;
+	irq_hw_number_t hwirq;
+	unsigned int i;
+
+	hwirq = fwspec->param[0];
+	for (i = 0; i < nr_irqs; i++)
+		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+				&xgene_gpio_sb_irq_chip, priv);
+
+	parent_fwspec.fwnode = domain->parent->fwnode;
+	if (is_of_node(parent_fwspec.fwnode)) {
+		parent_fwspec.param_count = 3;
+		parent_fwspec.param[0] = 0;/* SPI */
+		/* Skip SGIs and PPIs*/
+		parent_fwspec.param[1] = hwirq + priv->parent_irq_base - 32;
+		parent_fwspec.param[2] = fwspec->param[1];
+	} else if (is_fwnode_irqchip(parent_fwspec.fwnode)) {
+		parent_fwspec.param_count = 2;
+		parent_fwspec.param[0] = hwirq + priv->parent_irq_base;
+		parent_fwspec.param[1] = fwspec->param[1];
+	} else
+		return -EINVAL;
+
+	return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
+			&parent_fwspec);
+}
+
+static void xgene_gpio_sb_domain_free(struct irq_domain *domain,
+		unsigned int virq,
+		unsigned int nr_irqs)
+{
+	struct irq_data *d;
+	unsigned int i;
 
-	return -ENXIO;
+	for (i = 0; i < nr_irqs; i++) {
+		d = irq_domain_get_irq_data(domain, virq + i);
+		irq_domain_reset_irq_data(d);
+	}
 }
 
+static const struct irq_domain_ops xgene_gpio_sb_domain_ops = {
+	.translate      = xgene_gpio_sb_domain_translate,
+	.alloc          = xgene_gpio_sb_domain_alloc,
+	.free           = xgene_gpio_sb_domain_free,
+	.activate	= xgene_gpio_sb_domain_activate,
+	.deactivate	= xgene_gpio_sb_domain_deactivate,
+};
+
 static int xgene_gpio_sb_probe(struct platform_device *pdev)
 {
 	struct xgene_gpio_sb *priv;
-	u32 ret, i;
-	u32 default_lines[] = {0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D};
+	u32 ret;
 	struct resource *res;
 	void __iomem *regs;
+	struct irq_domain *parent_domain = NULL;
+	struct fwnode_handle *fwnode;
+	u32 val32;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -90,6 +256,18 @@ static int xgene_gpio_sb_probe(struct platform_device *pdev)
 	if (IS_ERR(regs))
 		return PTR_ERR(regs);
 
+	priv->regs = regs;
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret > 0) {
+		priv->parent_irq_base = irq_get_irq_data(ret)->hwirq;
+		parent_domain = irq_get_irq_data(ret)->domain;
+	}
+	if (!parent_domain) {
+		dev_err(&pdev->dev, "unable to obtain parent domain\n");
+		return -ENODEV;
+	}
+
 	ret = bgpio_init(&priv->gc, &pdev->dev, 4,
 			regs + MPA_GPIO_IN_ADDR,
 			regs + MPA_GPIO_OUT_ADDR, NULL,
@@ -97,30 +275,51 @@ static int xgene_gpio_sb_probe(struct platform_device *pdev)
         if (ret)
                 return ret;
 
-	priv->gc.to_irq = apm_gpio_sb_to_irq;
-	priv->gc.ngpio = XGENE_MAX_GPIO_DS;
+	priv->gc.to_irq = xgene_gpio_sb_to_irq;
 
-	priv->nirq = XGENE_MAX_GPIO_DS_IRQ;
+	/* Retrieve start irq pin, use default if property not found */
+	priv->irq_start = XGENE_DFLT_IRQ_START_PIN;
+	if (!device_property_read_u32(&pdev->dev,
+					XGENE_IRQ_START_PROPERTY, &val32))
+		priv->irq_start = val32;
 
-	priv->irq = devm_kzalloc(&pdev->dev, sizeof(u32) * XGENE_MAX_GPIO_DS,
-				   GFP_KERNEL);
-	if (!priv->irq)
-		return -ENOMEM;
+	/* Retrieve number irqs, use default if property not found */
+	priv->nirq = XGENE_DFLT_MAX_NIRQ;
+	if (!device_property_read_u32(&pdev->dev, XGENE_NIRQ_PROPERTY, &val32))
+		priv->nirq = val32;
 
-	for (i = 0; i < priv->nirq; i++) {
-		priv->irq[default_lines[i]] = platform_get_irq(pdev, i);
-		xgene_gpio_set_bit(&priv->gc, regs + MPA_GPIO_SEL_LO,
-                                   default_lines[i] * 2, 1);
-		xgene_gpio_set_bit(&priv->gc, regs + MPA_GPIO_INT_LVL, i, 1);
-	}
+	/* Retrieve number gpio, use default if property not found */
+	priv->gc.ngpio = XGENE_DFLT_MAX_NGPIO;
+	if (!device_property_read_u32(&pdev->dev, XGENE_NGPIO_PROPERTY, &val32))
+		priv->gc.ngpio = val32;
+
+	dev_info(&pdev->dev, "Support %d gpios, %d irqs start from pin %d\n",
+			priv->gc.ngpio, priv->nirq, priv->irq_start);
 
 	platform_set_drvdata(pdev, priv);
 
-	ret = gpiochip_add_data(&priv->gc, priv);
-	if (ret)
-		dev_err(&pdev->dev, "failed to register X-Gene GPIO Standby driver\n");
+	if (pdev->dev.of_node)
+		fwnode = of_node_to_fwnode(pdev->dev.of_node);
 	else
-		dev_info(&pdev->dev, "X-Gene GPIO Standby driver registered\n");
+		fwnode = pdev->dev.fwnode;
+
+	priv->irq_domain = irq_domain_create_hierarchy(parent_domain,
+					0, priv->nirq, fwnode,
+					&xgene_gpio_sb_domain_ops, priv);
+	if (!priv->irq_domain)
+		return -ENODEV;
+
+	priv->gc.irqdomain = priv->irq_domain;
+
+	ret = gpiochip_add_data(&priv->gc, priv);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"failed to register X-Gene GPIO Standby driver\n");
+		irq_domain_remove(priv->irq_domain);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "X-Gene GPIO Standby driver registered\n");
 
 	if (priv->nirq > 0) {
 		/* Register interrupt handlers for gpio signaled acpi events */
@@ -138,6 +337,8 @@ static int xgene_gpio_sb_remove(struct platform_device *pdev)
 		acpi_gpiochip_free_interrupts(&priv->gc);
 	}
 
+	irq_domain_remove(priv->irq_domain);
+
 	gpiochip_remove(&priv->gc);
 	return 0;
 }
-- 
1.7.12.4

Re: [PATCH v7 1/3] gpio: xgene: Enable X-Gene standby GPIO as interrupt controller

[Linus Walleij]

On Wed, Feb 17, 2016 at 2:15 PM, Quan Nguyen <qnguyen@apm.com> wrote:

> Enable X-Gene standby GPIO controller as interrupt controller to provide
> its own resources. This avoids ambiguity where GIC interrupt resource is
> use as X-Gene standby GPIO interrupt resource in user driver.
>
> Signed-off-by: Y Vo <yvo@apm.com>
> Signed-off-by: Quan Nguyen <qnguyen@apm.com>
> Acked-by: Marc Zyngier <marc.zyngier@arm.com>

Sweet! Patch applied.

Yours,
Linus Walleij

Re: [PATCH v7 1/3] gpio: xgene: Enable X-Gene standby GPIO as interrupt controller

[Quan Nguyen]

Thanks Linus and Marc.

On Fri, Feb 19, 2016 at 4:11 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Wed, Feb 17, 2016 at 2:15 PM, Quan Nguyen <qnguyen@apm.com> wrote:
>
>> Enable X-Gene standby GPIO controller as interrupt controller to provide
>> its own resources. This avoids ambiguity where GIC interrupt resource is
>> use as X-Gene standby GPIO interrupt resource in user driver.
>>
>> Signed-off-by: Y Vo <yvo@apm.com>
>> Signed-off-by: Quan Nguyen <qnguyen@apm.com>
>> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
>
> Sweet! Patch applied.
>
> Yours,
> Linus Walleij

[PATCH v7 2/3] Documentation: gpio: Update description for X-Gene standby GPIO controller DTS binding

[Quan Nguyen]

Update description for X-Gene standby GPIO controller DTS binding to
support GPIO line configuration as input, output or external IRQ pin.

Signed-off-by: Y Vo <yvo-qTEPVZfXA3Y@public.gmane.org>
Signed-off-by: Quan Nguyen <qnguyen-qTEPVZfXA3Y@public.gmane.org>
---
 .../devicetree/bindings/gpio/gpio-xgene-sb.txt     | 47 ++++++++++++++++++----
 1 file changed, 40 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
index dae1300..5490c1d 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
@@ -1,10 +1,20 @@
 APM X-Gene Standby GPIO controller bindings
 
-This is a gpio controller in the standby domain.
-
-There are 20 GPIO pins from 0..21. There is no GPIO_DS14 or GPIO_DS15,
-only GPIO_DS8..GPIO_DS13 support interrupts. The IRQ mapping
-is currently 1-to-1 on interrupts 0x28 thru 0x2d.
+This is a gpio controller in the standby domain. It also supports interrupt in
+some particular pins which are sourced to its parent interrupt controller
+as diagram below:
+                            +-----------------+
+                            | X-Gene standby  |
+                            | GPIO controller +------ GPIO_0
++------------+              |                 | ...
+| Parent IRQ | EXT_INT_0    |                 +------ GPIO_8/EXT_INT_0
+| controller | (SPI40)      |                 | ...
+| (GICv2)    +--------------+                 +------ GPIO_[N+8]/EXT_INT_N
+|            |   ...        |                 |
+|            | EXT_INT_N    |                 +------ GPIO_[N+9]
+|            | (SPI[40 + N])|                 | ...
+|            +--------------+                 +------ GPIO_MAX
++------------+              +-----------------+
 
 Required properties:
 - compatible: "apm,xgene-gpio-sb" for the X-Gene Standby GPIO controller
@@ -15,10 +25,18 @@ Required properties:
 		0 = active high
 		1 = active low
 - gpio-controller: Marks the device node as a GPIO controller.
-- interrupts: Shall contain exactly 6 interrupts.
+- interrupts: The EXT_INT_0 parent interrupt resource must be listed first.
+- interrupt-parent: Phandle of the parent interrupt controller.
+- interrupt-cells: Should be two.
+       - first cell is 0-N coresponding for EXT_INT_0 to EXT_INT_N.
+       - second cell is used to specify flags.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- apm,nr-gpios: Optional, specify number of gpios pin.
+- apm,nr-irqs: Optional, specify number of interrupt pins.
+- apm,irq-start: Optional, specify lowest gpio pin support interrupt.
 
 Example:
-	sbgpio: sbgpio@17001000 {
+	sbgpio: gpio@17001000{
 		compatible = "apm,xgene-gpio-sb";
 		reg = <0x0 0x17001000 0x0 0x400>;
 		#gpio-cells = <2>;
@@ -29,4 +47,19 @@ Example:
 				<0x0 0x2b 0x1>,
 				<0x0 0x2c 0x1>,
 				<0x0 0x2d 0x1>;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		apm,nr-gpios = <22>;
+		apm,nr-irqs = <6>;
+		apm,irq-start = <8>;
+	};
+
+	testuser {
+		compatible = "example,testuser";
+		/* Use the GPIO_13/EXT_INT_5 line as an active high triggered
+		 * level interrupt
+		 */
+		interrupts = <5 4>;
+		interrupt-parent = <&sbgpio>;
 	};
-- 
1.7.12.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v7 2/3] Documentation: gpio: Update description for X-Gene standby GPIO controller DTS binding

[Linus Walleij]

On Wed, Feb 17, 2016 at 2:15 PM, Quan Nguyen <qnguyen@apm.com> wrote:

> Update description for X-Gene standby GPIO controller DTS binding to
> support GPIO line configuration as input, output or external IRQ pin.
>
> Signed-off-by: Y Vo <yvo@apm.com>
> Signed-off-by: Quan Nguyen <qnguyen@apm.com>

Patch applied. But I cut down the subject line a bit.

Yours,
Linus Walleij

[PATCH v7 3/3] arm64: dts: Update X-Gene standby GPIO controller DTS entries

[Quan Nguyen]

Update APM X-Gene standby GPIO controller DTS entries to enable it
as interrupt controller.

Signed-off-by: Y Vo <yvo@apm.com>
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
---
 arch/arm64/boot/dts/apm/apm-storm.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index fe30f76..0f733da 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -883,6 +883,9 @@
 					<0x0 0x2b 0x1>,
 					<0x0 0x2c 0x1>,
 					<0x0 0x2d 0x1>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
 		};
 
 		rtc: rtc@10510000 {
-- 
1.7.12.4

Re: [PATCH v7 3/3] arm64: dts: Update X-Gene standby GPIO controller DTS entries

[Linus Walleij]

On Wed, Feb 17, 2016 at 2:15 PM, Quan Nguyen <qnguyen@apm.com> wrote:

> Update APM X-Gene standby GPIO controller DTS entries to enable it
> as interrupt controller.
>
> Signed-off-by: Y Vo <yvo@apm.com>
> Signed-off-by: Quan Nguyen <qnguyen@apm.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Please funnel this patch through the ARM SoC tree with all other
DTS files.

Yours,
Linus Walleij

Re: [PATCH v7 3/3] arm64: dts: Update X-Gene standby GPIO controller DTS entries

[Quan Nguyen]

On Fri, Feb 19, 2016 at 4:14 PM, Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> On Wed, Feb 17, 2016 at 2:15 PM, Quan Nguyen <qnguyen-qTEPVZfXA3Y@public.gmane.org> wrote:
>
>> Update APM X-Gene standby GPIO controller DTS entries to enable it
>> as interrupt controller.
>>
>> Signed-off-by: Y Vo <yvo-qTEPVZfXA3Y@public.gmane.org>
>> Signed-off-by: Quan Nguyen <qnguyen-qTEPVZfXA3Y@public.gmane.org>
>
> Reviewed-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>
> Please funnel this patch through the ARM SoC tree with all other
> DTS files.

Let me do it and resend.

Thanks,
-- Quan
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v7 3/3] arm64: dts: Update X-Gene standby GPIO controller DTS entries

[Loc Ho]

Hi Quan,

On Fri, Feb 19, 2016 at 5:47 AM, Quan Nguyen <qnguyen@apm.com> wrote:
> On Fri, Feb 19, 2016 at 4:14 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
>> On Wed, Feb 17, 2016 at 2:15 PM, Quan Nguyen <qnguyen@apm.com> wrote:
>>
>>> Update APM X-Gene standby GPIO controller DTS entries to enable it
>>> as interrupt controller.
>>>
>>> Signed-off-by: Y Vo <yvo@apm.com>
>>> Signed-off-by: Quan Nguyen <qnguyen@apm.com>
>>
>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>>
>> Please funnel this patch through the ARM SoC tree with all other
>> DTS files.
>
> Let me do it and resend.

Duc will pull  this into xgene-next GIT for Olof to pull.

-Loc