From: Caesar Wang <wxt@rock-chips.com>
To: linus.walleij@linaro.org, heiko@sntech.de
Cc: linux-rockchip@lists.infradead.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org, Caesar Wang <wxt@rock-chips.com>
Subject: [RESEND PATCH] pinctrl: rockchip: add support the get_direction
Date: Mon, 14 Mar 2016 14:01:19 +0800 [thread overview]
Message-ID: <1457935279-7881-1-git-send-email-wxt@rock-chips.com> (raw)
This patch adds the get_direction to support the gpio
interface.
The gpio direction is not used on rockchip platform when use the gpio
debugfs.
Tested on kylin board. (RK3036 SoCs)
The repro steps:
$/sys/class/gpio/
echo 53 > export
$/sys/class/gpio/gpio53# cat direction
in
In general, the gpio53 should be out value, but the direction is the
default value 'in', since the get_direction didn't supported in rockchip
pinctrl.
So, we should add this patch to support it.
Reported-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-gpio@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
---
Changes in RESEND:
- Remove the change-id
drivers/pinctrl/pinctrl-rockchip.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index bf032b9..f22a186 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -1208,6 +1208,18 @@ static int rockchip_pmx_set(struct pinctrl_dev *pctldev, unsigned selector,
return 0;
}
+static int rockchip_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+ struct rockchip_pin_bank *bank = gpiochip_get_data(chip);
+ int pin;
+ u32 data;
+
+ pin = offset - chip->base;
+ data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
+
+ return !!(data & BIT(pin));
+}
+
/*
* The calls to gpio_direction_output() and gpio_direction_input()
* leads to this function call (via the pinctrl_gpio_direction_{input|output}()
@@ -1741,6 +1753,7 @@ static const struct gpio_chip rockchip_gpiolib_chip = {
.free = gpiochip_generic_free,
.set = rockchip_gpio_set,
.get = rockchip_gpio_get,
+ .get_direction = rockchip_gpio_get_direction,
.direction_input = rockchip_gpio_direction_input,
.direction_output = rockchip_gpio_direction_output,
.to_irq = rockchip_gpio_to_irq,
--
1.9.1
next reply other threads:[~2016-03-14 6:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-14 6:01 Caesar Wang [this message]
2016-03-14 22:36 ` [RESEND PATCH] pinctrl: rockchip: add support the get_direction Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457935279-7881-1-git-send-email-wxt@rock-chips.com \
--to=wxt@rock-chips.com \
--cc=heiko@sntech.de \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).