[PATCH v6 0/2] gpio: dwapb: add gpio-signaled acpi event support for power button

[PATCH v6 0/2] gpio: dwapb: add gpio-signaled acpi event support for power button

[qiujiang]

This patchset adds gpio-signaled acpi events support for power button on hisilicon
D02 board.

The two patches respectively:
        - convert device node to fwnode
        - add gpio-signaled acpi event support

   This patchset is based on
   https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
   branch "devel"

Changes v5 -> v6:
   - merge patch 2~3 to one patch
   - small fixed from Alan's suggestion
   - fixed subject title reference commit history

Changes v4 -> v5:
   - split into three patchs
   - add Andy's ACKs
   
Changes v3 -> v4:
   - re-organize this two patchs by Andy's suggestion

Changes v2 -> v3:
   - fixed the build error reported by Kbuild test robot

Changes v1 -> v2: 
   - rebase to branch "devel" of Linus Walleij's repository
   - split in two patch as suggested by Andy S
   - add Mika's ACKs

qiujiang (2):
  gpio: dwapb: convert device node to fwnode
  gpio: dwapb: add gpio-signaled acpi event support

 drivers/gpio/gpio-dwapb.c                | 69 ++++++++++++++++++++------------
 drivers/mfd/intel_quark_i2c_gpio.c       |  2 +-
 include/linux/platform_data/gpio-dwapb.h |  2 +-
 3 files changed, 46 insertions(+), 27 deletions(-)

-- 
1.9.1

[PATCH v6 1/2] gpio: dwapb: convert device node to fwnode

[qiujiang]

This patch converts device node to fwnode for dwapb driver,
so as to provide a unified node for DT and ACPI bindings.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: qiujiang <qiujiang@huawei.com>
---
 drivers/gpio/gpio-dwapb.c                | 48 +++++++++++++++-----------------
 drivers/mfd/intel_quark_i2c_gpio.c       |  2 +-
 include/linux/platform_data/gpio-dwapb.h |  2 +-
 3 files changed, 25 insertions(+), 27 deletions(-)

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 597de1e..3498393 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -22,6 +22,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/spinlock.h>
 #include <linux/platform_data/gpio-dwapb.h>
 #include <linux/slab.h>
@@ -290,14 +291,14 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
 				 struct dwapb_port_property *pp)
 {
 	struct gpio_chip *gc = &port->gc;
-	struct device_node *node = pp->node;
+	struct fwnode_handle  *fwnode = pp->fwnode;
 	struct irq_chip_generic	*irq_gc = NULL;
 	unsigned int hwirq, ngpio = gc->ngpio;
 	struct irq_chip_type *ct;
 	int err, i;
 
-	gpio->domain = irq_domain_add_linear(node, ngpio,
-					     &irq_generic_chip_ops, gpio);
+	gpio->domain = irq_domain_create_linear(fwnode, ngpio,
+						 &irq_generic_chip_ops, gpio);
 	if (!gpio->domain)
 		return;
 
@@ -415,7 +416,8 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 	}
 
 #ifdef CONFIG_OF_GPIO
-	port->gc.of_node = pp->node;
+	port->gc.of_node = is_of_node(pp->fwnode) ?
+		to_of_node(pp->fwnode) : NULL;
 #endif
 	port->gc.ngpio = pp->ngpio;
 	port->gc.base = pp->gpio_base;
@@ -447,19 +449,15 @@ static void dwapb_gpio_unregister(struct dwapb_gpio *gpio)
 }
 
 static struct dwapb_platform_data *
-dwapb_gpio_get_pdata_of(struct device *dev)
+dwapb_gpio_get_pdata(struct device *dev)
 {
-	struct device_node *node, *port_np;
+	struct fwnode_handle *fwnode;
 	struct dwapb_platform_data *pdata;
 	struct dwapb_port_property *pp;
 	int nports;
 	int i;
 
-	node = dev->of_node;
-	if (!IS_ENABLED(CONFIG_OF_GPIO) || !node)
-		return ERR_PTR(-ENODEV);
-
-	nports = of_get_child_count(node);
+	nports = device_get_child_node_count(dev);
 	if (nports == 0)
 		return ERR_PTR(-ENODEV);
 
@@ -474,21 +472,19 @@ dwapb_gpio_get_pdata_of(struct device *dev)
 	pdata->nports = nports;
 
 	i = 0;
-	for_each_child_of_node(node, port_np) {
+	device_for_each_child_node(dev, fwnode)  {
 		pp = &pdata->properties[i++];
-		pp->node = port_np;
+		pp->fwnode = fwnode;
 
-		if (of_property_read_u32(port_np, "reg", &pp->idx) ||
+		if (fwnode_property_read_u32(fwnode, "reg", &pp->idx) ||
 		    pp->idx >= DWAPB_MAX_PORTS) {
-			dev_err(dev, "missing/invalid port index for %s\n",
-				port_np->full_name);
+			dev_err(dev, "missing/invalid port index\n");
 			return ERR_PTR(-EINVAL);
 		}
 
-		if (of_property_read_u32(port_np, "snps,nr-gpios",
+		if (fwnode_property_read_u32(fwnode, "snps,nr-gpios",
 					 &pp->ngpio)) {
-			dev_info(dev, "failed to get number of gpios for %s\n",
-				 port_np->full_name);
+			dev_info(dev, "failed to get number of gpios\n");
 			pp->ngpio = 32;
 		}
 
@@ -496,18 +492,20 @@ dwapb_gpio_get_pdata_of(struct device *dev)
 		 * Only port A can provide interrupts in all configurations of
 		 * the IP.
 		 */
-		if (pp->idx == 0 &&
-		    of_property_read_bool(port_np, "interrupt-controller")) {
-			pp->irq = irq_of_parse_and_map(port_np, 0);
+		if (dev->of_node && pp->idx == 0 &&
+			fwnode_property_read_bool(fwnode,
+						  "interrupt-controller")) {
+			pp->irq = irq_of_parse_and_map(to_of_node(fwnode), 0);
 			if (!pp->irq) {
 				dev_warn(dev, "no irq for bank %s\n",
-					 port_np->full_name);
+					 to_of_node(fwnode)->full_name);
 			}
 		}
 
 		pp->irq_shared	= false;
 		pp->gpio_base	= -1;
-		pp->name	= port_np->full_name;
+		if (dev->of_node)
+			pp->name = to_of_node(fwnode)->full_name;
 	}
 
 	return pdata;
@@ -523,7 +521,7 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
 	struct dwapb_platform_data *pdata = dev_get_platdata(dev);
 
 	if (!pdata) {
-		pdata = dwapb_gpio_get_pdata_of(dev);
+		pdata = dwapb_gpio_get_pdata(dev);
 		if (IS_ERR(pdata))
 			return PTR_ERR(pdata);
 	}
diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c
index bdc5e27..958ed26 100644
--- a/drivers/mfd/intel_quark_i2c_gpio.c
+++ b/drivers/mfd/intel_quark_i2c_gpio.c
@@ -219,7 +219,7 @@ static int intel_quark_gpio_setup(struct pci_dev *pdev, struct mfd_cell *cell)
 		return -ENOMEM;
 
 	/* Set the properties for portA */
-	pdata->properties->node		= NULL;
+	pdata->properties->fwnode	= NULL;
 	pdata->properties->name		= "intel-quark-x1000-gpio-portA";
 	pdata->properties->idx		= 0;
 	pdata->properties->ngpio	= INTEL_QUARK_MFD_NGPIO;
diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h
index 28702c8..c5bd1f2 100644
--- a/include/linux/platform_data/gpio-dwapb.h
+++ b/include/linux/platform_data/gpio-dwapb.h
@@ -15,7 +15,7 @@
 #define GPIO_DW_APB_H
 
 struct dwapb_port_property {
-	struct device_node *node;
+	struct fwnode_handle *fwnode;
 	const char	*name;
 	unsigned int	idx;
 	unsigned int	ngpio;
-- 
1.9.1

[PATCH v6 2/2] gpio: dwapb: add gpio-signaled acpi event support

[qiujiang]

This patch adds gpio-signaled acpi event support. It is used for
power button on hisilicon D02 board, an arm64 platform.

Corresponding DSDT file is defined as follows:
 Device(GPI0) {
        Name(_HID, "HISI0181")
	Name(_ADR, 0)
        Name(_UID, 0)

	Name (_CRS, ResourceTemplate ()  {
		Memory32Fixed (ReadWrite, 0x802e0000, 0x10000)
		Interrupt (ResourceConsumer, Level, ActiveHigh,
		Exclusive,,,)  {344}
	})

	Device(PRTa) {
		Name (_DSD, Package () {
		Package () {
			Package () {"reg",0},
			Package () {"snps,nr-gpios",32},
			}
		})
	}

	Name (_AEI, ResourceTemplate () {
		GpioInt(Edge, ActiveLow, ExclusiveAndWake,
		PullUp, , " \\_SB.GPI0") {8}
	})

	Method (_E08, 0x0, NotSerialized) {
		Notify (\_SB.PWRB, 0x80)
	}
}

Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: qiujiang <qiujiang@huawei.com>
---
 drivers/gpio/gpio-dwapb.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 3498393..f52adc9 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -7,6 +7,7 @@
  *
  * All enquiries to support@picochip.com
  */
+#include <linux/acpi.h>
 #include <linux/gpio/driver.h>
 /* FIXME: for gpio_get_value(), replace this with direct register read */
 #include <linux/gpio.h>
@@ -27,6 +28,8 @@
 #include <linux/platform_data/gpio-dwapb.h>
 #include <linux/slab.h>
 
+#include "gpiolib.h"
+
 #define GPIO_SWPORTA_DR		0x00
 #define GPIO_SWPORTA_DDR	0x04
 #define GPIO_SWPORTB_DR		0x0c
@@ -436,6 +439,10 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 	else
 		port->is_registered = true;
 
+	/* Add GPIO-signaled ACPI event support */
+	if (pp->irq)
+		acpi_gpiochip_request_interrupts(&port->gc);
+
 	return err;
 }
 
@@ -502,10 +509,17 @@ dwapb_gpio_get_pdata(struct device *dev)
 			}
 		}
 
+		if (has_acpi_companion(dev) && pp->idx == 0)
+			pp->irq = platform_get_irq(to_platform_device(dev), 0);
+
 		pp->irq_shared	= false;
 		pp->gpio_base	= -1;
+
 		if (dev->of_node)
 			pp->name = to_of_node(fwnode)->full_name;
+
+		if (has_acpi_companion(dev))
+			pp->name = acpi_dev_name(to_acpi_device_node(fwnode));
 	}
 
 	return pdata;
@@ -578,6 +592,12 @@ static const struct of_device_id dwapb_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, dwapb_of_match);
 
+static const struct acpi_device_id dwapb_acpi_match[] = {
+	{"HISI0181", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, dwapb_acpi_match);
+
 #ifdef CONFIG_PM_SLEEP
 static int dwapb_gpio_suspend(struct device *dev)
 {
@@ -672,6 +692,7 @@ static struct platform_driver dwapb_gpio_driver = {
 		.name	= "gpio-dwapb",
 		.pm	= &dwapb_gpio_pm_ops,
 		.of_match_table = of_match_ptr(dwapb_of_match),
+		.acpi_match_table = ACPI_PTR(dwapb_acpi_match),
 	},
 	.probe		= dwapb_gpio_probe,
 	.remove		= dwapb_gpio_remove,
-- 
1.9.1

Re: [PATCH v6 1/2] gpio: dwapb: convert device node to fwnode

[Alan Tull]

On Fri, Mar 25, 2016 at 9:31 PM, qiujiang <qiujiang@huawei.com> wrote:

> -               if (pp->idx == 0 &&
> -                   of_property_read_bool(port_np, "interrupt-controller")) {
> -                       pp->irq = irq_of_parse_and_map(port_np, 0);
> +               if (dev->of_node && pp->idx == 0 &&
> +                       fwnode_property_read_bool(fwnode,
> +                                                 "interrupt-controller")) {
> +                       pp->irq = irq_of_parse_and_map(to_of_node(fwnode), 0);
>                         if (!pp->irq) {
>                                 dev_warn(dev, "no irq for bank %s\n",
> -                                        port_np->full_name);
> +                                        to_of_node(fwnode)->full_name);
>                         }
>                 }
>
>                 pp->irq_shared  = false;
>                 pp->gpio_base   = -1;
> -               pp->name        = port_np->full_name;
> +               if (dev->of_node)
> +                       pp->name = to_of_node(fwnode)->full_name;

Hi Jiang,

I tested lightly on a CycloneV and it worked fine (with device tree).

One suggestion for both patches: you could remove name from struct
dwapb_port_property and get rid of pp->name and nobody would miss it.
All it is used for is some dev_err's so the device info gets printed
anyway.  For example (if I leave the irq out of the DT)

gpio-dwapb ff708000.gpio: no irq for bank /soc/gpio@ff708000/gpio-controller@0

is redundant.  The only additional info here from the name is the port
index.  That could be added to the messages without having to get the
name through the two property/of methods.

Alan

Re: [PATCH v6 1/2] gpio: dwapb: convert device node to fwnode

[Andy Shevchenko]

On Tue, Mar 29, 2016 at 7:30 PM, Alan Tull <delicious.quinoa@gmail.com> wrote:
> On Fri, Mar 25, 2016 at 9:31 PM, qiujiang <qiujiang@huawei.com> wrote:
>
>> -               if (pp->idx == 0 &&
>> -                   of_property_read_bool(port_np, "interrupt-controller")) {
>> -                       pp->irq = irq_of_parse_and_map(port_np, 0);
>> +               if (dev->of_node && pp->idx == 0 &&
>> +                       fwnode_property_read_bool(fwnode,
>> +                                                 "interrupt-controller")) {
>> +                       pp->irq = irq_of_parse_and_map(to_of_node(fwnode), 0);
>>                         if (!pp->irq) {
>>                                 dev_warn(dev, "no irq for bank %s\n",
>> -                                        port_np->full_name);
>> +                                        to_of_node(fwnode)->full_name);
>>                         }
>>                 }
>>
>>                 pp->irq_shared  = false;
>>                 pp->gpio_base   = -1;
>> -               pp->name        = port_np->full_name;
>> +               if (dev->of_node)
>> +                       pp->name = to_of_node(fwnode)->full_name;
>
> Hi Jiang,
>
> I tested lightly on a CycloneV and it worked fine (with device tree).
>
> One suggestion for both patches: you could remove name from struct
> dwapb_port_property and get rid of pp->name and nobody would miss it.
> All it is used for is some dev_err's so the device info gets printed
> anyway.  For example (if I leave the irq out of the DT)
>
> gpio-dwapb ff708000.gpio: no irq for bank /soc/gpio@ff708000/gpio-controller@0
>
> is redundant.  The only additional info here from the name is the port
> index.  That could be added to the messages without having to get the
> name through the two property/of methods.
>

Good suggestion! That'll make patches and code cleaner.

Perhaps separate prepended  patch?

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v6 2/2] gpio: dwapb: add gpio-signaled acpi event support

[Andy Shevchenko]

On Sat, Mar 26, 2016 at 4:31 AM, qiujiang <qiujiang@huawei.com> wrote:
> This patch adds gpio-signaled acpi event support. It is used for
> power button on hisilicon D02 board, an arm64 platform.

Yes, looks good, my tag stays.

> @@ -502,10 +509,17 @@ dwapb_gpio_get_pdata(struct device *dev)
>                         }
>                 }
>
> +               if (has_acpi_companion(dev) && pp->idx == 0)
> +                       pp->irq = platform_get_irq(to_platform_device(dev), 0);
> +

>                 pp->irq_shared  = false;
>                 pp->gpio_base   = -1;


> +
>                 if (dev->of_node)
>                         pp->name = to_of_node(fwnode)->full_name;

This change doesn't belong the patch, though it should gone with the
two lines of pp->name assignment as per Alan's suggestion to get rid
of pp->name completely.

> +
> +               if (has_acpi_companion(dev))
> +                       pp->name = acpi_dev_name(to_acpi_device_node(fwnode));

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v6 1/2] gpio: dwapb: convert device node to fwnode

[Jiang Qiu]

在 2016/3/30 19:38, Andy Shevchenko 写道:
> On Tue, Mar 29, 2016 at 7:30 PM, Alan Tull <delicious.quinoa@gmail.com> wrote:
>> On Fri, Mar 25, 2016 at 9:31 PM, qiujiang <qiujiang@huawei.com> wrote:
>>
>>> -               if (pp->idx == 0 &&
>>> -                   of_property_read_bool(port_np, "interrupt-controller")) {
>>> -                       pp->irq = irq_of_parse_and_map(port_np, 0);
>>> +               if (dev->of_node && pp->idx == 0 &&
>>> +                       fwnode_property_read_bool(fwnode,
>>> +                                                 "interrupt-controller")) {
>>> +                       pp->irq = irq_of_parse_and_map(to_of_node(fwnode), 0);
>>>                         if (!pp->irq) {
>>>                                 dev_warn(dev, "no irq for bank %s\n",
>>> -                                        port_np->full_name);
>>> +                                        to_of_node(fwnode)->full_name);
>>>                         }
>>>                 }
>>>
>>>                 pp->irq_shared  = false;
>>>                 pp->gpio_base   = -1;
>>> -               pp->name        = port_np->full_name;
>>> +               if (dev->of_node)
>>> +                       pp->name = to_of_node(fwnode)->full_name;
>>
>> Hi Jiang,
>>
>> I tested lightly on a CycloneV and it worked fine (with device tree).
>>
>> One suggestion for both patches: you could remove name from struct
>> dwapb_port_property and get rid of pp->name and nobody would miss it.
>> All it is used for is some dev_err's so the device info gets printed
>> anyway.  For example (if I leave the irq out of the DT)
>>
>> gpio-dwapb ff708000.gpio: no irq for bank /soc/gpio@ff708000/gpio-controller@0
>>
>> is redundant.  The only additional info here from the name is the port
>> index.  That could be added to the messages without having to get the
>> name through the two property/of methods.
>>
> 
> Good suggestion! That'll make patches and code cleaner.
> 
> Perhaps separate prepended  patch?
> 
Hi Alan/Andy,

It sounds good, I will follow this suggestion and do a test. But, what's the
"separate prepended patch" mean?

Thanks, Jiang

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v6 2/2] gpio: dwapb: add gpio-signaled acpi event support

[Jiang Qiu]

在 2016/3/30 19:41, Andy Shevchenko 写道:
> On Sat, Mar 26, 2016 at 4:31 AM, qiujiang <qiujiang@huawei.com> wrote:
>> This patch adds gpio-signaled acpi event support. It is used for
>> power button on hisilicon D02 board, an arm64 platform.
> 
> Yes, looks good, my tag stays.
> 
>> @@ -502,10 +509,17 @@ dwapb_gpio_get_pdata(struct device *dev)
>>                         }
>>                 }
>>
>> +               if (has_acpi_companion(dev) && pp->idx == 0)
>> +                       pp->irq = platform_get_irq(to_platform_device(dev), 0);
>> +
> 
>>                 pp->irq_shared  = false;
>>                 pp->gpio_base   = -1;
> 
> 
>> +
>>                 if (dev->of_node)
>>                         pp->name = to_of_node(fwnode)->full_name;
> 
> This change doesn't belong the patch, though it should gone with the
> two lines of pp->name assignment as per Alan's suggestion to get rid
> of pp->name completely.

Agree, I plan to take Alan's suggestion, thank you.

> 
>> +
>> +               if (has_acpi_companion(dev))
>> +                       pp->name = acpi_dev_name(to_acpi_device_node(fwnode));
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v6 1/2] gpio: dwapb: convert device node to fwnode

[Andy Shevchenko]

On Thu, Mar 31, 2016 at 3:51 AM, Jiang Qiu <qiujiang@huawei.com> wrote:
> 在 2016/3/30 19:38, Andy Shevchenko 写道:

>>> One suggestion for both patches: you could remove name from struct
>>> dwapb_port_property and get rid of pp->name and nobody would miss it.
>>> All it is used for is some dev_err's so the device info gets printed
>>> anyway.  For example (if I leave the irq out of the DT)
>>>
>>> gpio-dwapb ff708000.gpio: no irq for bank /soc/gpio@ff708000/gpio-controller@0
>>>
>>> is redundant.  The only additional info here from the name is the port
>>> index.  That could be added to the messages without having to get the
>>> name through the two property/of methods.
>>>
>>
>> Good suggestion! That'll make patches and code cleaner.
>>
>> Perhaps separate prepended  patch?
>>
> Hi Alan/Andy,
>
> It sounds good, I will follow this suggestion and do a test. But, what's the
> "separate prepended patch" mean?

Preparatory patch which goes first in the series.

-- 
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html