From: Linus Walleij <linus.walleij@linaro.org>
To: linux-gpio@vger.kernel.org, Alexandre Courbot <acourbot@nvidia.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH] gpio: tc3589x: use BIT() macro
Date: Tue, 5 Apr 2016 15:10:55 +0200 [thread overview]
Message-ID: <1459861855-1975-1-git-send-email-linus.walleij@linaro.org> (raw)
This switch to use BIT(n) instead of (1 << n) which is less
to the point. Most GPIO drivers do this to avoid mistakes.
Also switch from using <linux/gpio.h> to the apropriate
<linux/gpio/driver.h> include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/gpio/gpio-tc3589x.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c
index 4f566e6b81f1..3d84bae89067 100644
--- a/drivers/gpio/gpio-tc3589x.c
+++ b/drivers/gpio/gpio-tc3589x.c
@@ -10,10 +10,11 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
#include <linux/of.h>
#include <linux/interrupt.h>
#include <linux/mfd/tc3589x.h>
+#include <linux/bitops.h>
/*
* These registers are modified under the irq bus lock and cached to avoid
@@ -39,7 +40,7 @@ static int tc3589x_gpio_get(struct gpio_chip *chip, unsigned offset)
struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(chip);
struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
u8 reg = TC3589x_GPIODATA0 + (offset / 8) * 2;
- u8 mask = 1 << (offset % 8);
+ u8 mask = BIT(offset % 8);
int ret;
ret = tc3589x_reg_read(tc3589x, reg);
@@ -55,7 +56,7 @@ static void tc3589x_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
u8 reg = TC3589x_GPIODATA0 + (offset / 8) * 2;
unsigned pos = offset % 8;
- u8 data[] = {!!val << pos, 1 << pos};
+ u8 data[] = {!!val << pos, BIT(pos)};
tc3589x_block_write(tc3589x, reg, ARRAY_SIZE(data), data);
}
@@ -70,7 +71,7 @@ static int tc3589x_gpio_direction_output(struct gpio_chip *chip,
tc3589x_gpio_set(chip, offset, val);
- return tc3589x_set_bits(tc3589x, reg, 1 << pos, 1 << pos);
+ return tc3589x_set_bits(tc3589x, reg, BIT(pos), BIT(pos));
}
static int tc3589x_gpio_direction_input(struct gpio_chip *chip,
@@ -100,7 +101,7 @@ static int tc3589x_gpio_irq_set_type(struct irq_data *d, unsigned int type)
struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(gc);
int offset = d->hwirq;
int regoffset = offset / 8;
- int mask = 1 << (offset % 8);
+ int mask = BIT(offset % 8);
if (type == IRQ_TYPE_EDGE_BOTH) {
tc3589x_gpio->regs[REG_IBE][regoffset] |= mask;
@@ -165,7 +166,7 @@ static void tc3589x_gpio_irq_mask(struct irq_data *d)
struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(gc);
int offset = d->hwirq;
int regoffset = offset / 8;
- int mask = 1 << (offset % 8);
+ int mask = BIT(offset % 8);
tc3589x_gpio->regs[REG_IE][regoffset] &= ~mask;
}
@@ -176,7 +177,7 @@ static void tc3589x_gpio_irq_unmask(struct irq_data *d)
struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(gc);
int offset = d->hwirq;
int regoffset = offset / 8;
- int mask = 1 << (offset % 8);
+ int mask = BIT(offset % 8);
tc3589x_gpio->regs[REG_IE][regoffset] |= mask;
}
--
2.4.3
next reply other threads:[~2016-04-05 13:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-05 13:10 Linus Walleij [this message]
2016-04-05 13:52 ` [PATCH] gpio: tc3589x: use BIT() macro Bjorn Andersson
2016-04-05 14:59 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459861855-1975-1-git-send-email-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=acourbot@nvidia.com \
--cc=linux-gpio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).