linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] extend documentation for gpiod_set_array() functions
@ 2015-03-05 13:36 Rojhalat Ibrahim
  2015-03-09 16:39 ` Linus Walleij
  0 siblings, 1 reply; 2+ messages in thread
From: Rojhalat Ibrahim @ 2015-03-05 13:36 UTC (permalink / raw)
  To: linux-gpio@vger.kernel.org
  Cc: Linus Walleij, Alexandre Courbot, Alexandre Courbot

Extend the documentation for the gpiod_set_array() functions and elaborate
a bit on possible use cases.

Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
---
 Documentation/gpio/consumer.txt | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
index d29a972..c21c131 100644
--- a/Documentation/gpio/consumer.txt
+++ b/Documentation/gpio/consumer.txt
@@ -259,6 +259,26 @@ GPIOs belonging to the same bank or chip simultaneously if supported by the
 corresponding chip driver. In that case a significantly improved performance
 can be expected. If simultaneous setting is not possible the GPIOs will be set
 sequentially.
+
+The gpiod_set_array() functions take three arguments:
+	* array_size	- the number of array elements
+	* desc_array	- an array of GPIO descriptors
+	* value_array	- an array of values to assign to the GPIOs
+
+The descriptor array can be obtained using the gpiod_get_array() function
+or one of its variants. If the group of descriptors returned by that function
+matches the desired group of GPIOs, those GPIOs can be set by simply using
+the struct gpio_descs returned by gpiod_get_array():
+
+	struct gpio_descs *my_gpio_descs = gpiod_get_array(...);
+	gpiod_set_array(my_gpio_descs->ndescs, my_gpio_descs->desc,
+			my_gpio_values);
+
+It is also possible to set a completely arbitrary array of descriptors. The
+descriptors may be obtained using any combination of gpiod_get() and
+gpiod_get_array(). Afterwards the array of descriptors has to be setup
+manually before it can be used with gpiod_set_array().
+
 Note that for optimal performance GPIOs belonging to the same chip should be
 contiguous within the array of descriptors.
 
-- 
2.0.5



^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2015-03-09 16:39 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-03-05 13:36 [PATCH] extend documentation for gpiod_set_array() functions Rojhalat Ibrahim
2015-03-09 16:39 ` Linus Walleij

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).