From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <gnurou@gmail.com>, Vignesh R <vigneshr@ti.com>,
Yong Li <yong.b.li@intel.com>,
Geert Uytterhoeven <geert+renesas@glider.be>
Cc: linux-gpio <linux-gpio@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 5/5] gpio: pca953x: refactor pca953x_read_regs()
Date: Wed, 07 Sep 2016 14:35:57 +0300 [thread overview]
Message-ID: <1473248157.11323.39.camel@linux.intel.com> (raw)
In-Reply-To: <1473240297-19881-6-git-send-email-bgolaszewski@baylibre.com>
On Wed, 2016-09-07 at 11:24 +0200, Bartosz Golaszewski wrote:
> Avoid the unnecessary if-else in pca953x_read_regs() by spltting the
> routine into smaller, specialized functions and calling the right one
> via a function pointer held in struct pca953x.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
> drivers/gpio/gpio-pca953x.c | 55 ++++++++++++++++++++++++++++++++--
> -----------
> 1 file changed, 39 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
> index 00bb2ea..e417c42 100644
> --- a/drivers/gpio/gpio-pca953x.c
> +++ b/drivers/gpio/gpio-pca953x.c
> @@ -134,6 +134,7 @@ struct pca953x_chip {
> const struct pca953x_offset *offset;
>
> int (*write_regs)(struct pca953x_chip *, int, u8 *);
> + int (*read_regs)(struct pca953x_chip *, int, u8 *);
> };
>
> static int pca953x_read_single(struct pca953x_chip *chip, int reg,
> u32 *val,
> @@ -219,24 +220,41 @@ static int pca953x_write_regs(struct
> pca953x_chip *chip, int reg, u8 *val)
> return 0;
> }
>
> -static int pca953x_read_regs(struct pca953x_chip *chip, int reg, u8
> *val)
> +static int pca953x_read_regs_8(struct pca953x_chip *chip, int reg, u8
> *val)
> {
> int ret;
>
> - if (chip->gpio_chip.ngpio <= 8) {
> - ret = i2c_smbus_read_byte_data(chip->client, reg);
> - *val = ret;
> - } else if (chip->gpio_chip.ngpio >= 24) {
> - int bank_shift = fls((chip->gpio_chip.ngpio - 1) /
> BANK_SZ);
> + ret = i2c_smbus_read_byte_data(chip->client, reg);
> + *val = ret;
>
> - ret = i2c_smbus_read_i2c_block_data(chip->client,
> - (reg << bank_shift) |
> REG_ADDR_AI,
> - NBANK(chip), val);
> - } else {
> - ret = i2c_smbus_read_word_data(chip->client, reg <<
> 1);
> - val[0] = (u16)ret & 0xFF;
> - val[1] = (u16)ret >> 8;
> - }
> + return ret;
> +}
> +
> +static int pca953x_read_regs_16(struct pca953x_chip *chip, int reg,
> u8 *val)
> +{
> + int ret;
> +
> + ret = i2c_smbus_read_word_data(chip->client, reg << 1);
> + val[0] = (u16)ret & 0xFF;
> + val[1] = (u16)ret >> 8;
> +
> + return ret;
> +}
> +
> +static int pca953x_read_regs_24(struct pca953x_chip *chip, int reg,
> u8 *val)
> +{
> + int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
> +
> + return i2c_smbus_read_i2c_block_data(chip->client,
> + (reg << bank_shift) |
> REG_ADDR_AI,
> + NBANK(chip), val);
> +}
> +
> +static int pca953x_read_regs(struct pca953x_chip *chip, int reg, u8
> *val)
> +{
> + int ret;
> +
> + ret = chip->read_regs(chip, reg, val);
> if (ret < 0) {
> dev_err(&chip->client->dev, "failed reading
> register\n");
> return ret;
> @@ -766,10 +784,15 @@ static int pca953x_probe(struct i2c_client
> *client,
> */
> pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
>
> - if (chip->gpio_chip.ngpio <= 8)
> + if (chip->gpio_chip.ngpio <= 8) {
> chip->write_regs = pca953x_write_regs_8;
> - else if (chip->gpio_chip.ngpio >= 24)
> + chip->read_regs = pca953x_read_regs_8;
> + } else if (chip->gpio_chip.ngpio >= 24) {
> chip->write_regs = pca953x_write_regs_24;
> + chip->read_regs = pca953x_read_regs_24;
> + } else {
> + chip->read_regs = pca953x_read_regs_16;
> + }
For sake of consolidation stuff can we move write_regs_16 variants here?
It might require to refactor patch 3 as well
>
> if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE)
> ret = device_pca953x_init(chip, invert);
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
next prev parent reply other threads:[~2016-09-07 11:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-07 9:24 [PATCH v2 0/5] gpio: pca953x: code refactoring Bartosz Golaszewski
2016-09-07 9:24 ` [PATCH v2 1/5] gpio: pca953x: coding style fixes Bartosz Golaszewski
2016-09-07 11:17 ` Andy Shevchenko
2016-09-07 9:24 ` [PATCH v2 2/5] gpio: pca953x: code shrink Bartosz Golaszewski
2016-09-07 9:24 ` [PATCH v2 3/5] gpio: pca953x: refactor pca953x_write_regs() Bartosz Golaszewski
2016-09-07 9:24 ` [PATCH v2 4/5] gpio: pca953x: remove an unused variable Bartosz Golaszewski
2016-09-07 11:36 ` Andy Shevchenko
2016-09-07 11:40 ` Bartosz Golaszewski
2016-09-07 12:17 ` Andy Shevchenko
2016-09-07 9:24 ` [PATCH v2 5/5] gpio: pca953x: refactor pca953x_read_regs() Bartosz Golaszewski
2016-09-07 11:35 ` Andy Shevchenko [this message]
2016-09-07 11:36 ` [PATCH v2 0/5] gpio: pca953x: code refactoring Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473248157.11323.39.camel@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=bgolaszewski@baylibre.com \
--cc=geert+renesas@glider.be \
--cc=gnurou@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vigneshr@ti.com \
--cc=yong.b.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).