From: Nava kishore Manne <nava.manne@xilinx.com>
To: linus.walleij@linaro.org, gnurou@gmail.com,
michal.simek@xilinx.com, soren.brinkmann@xilinx.com,
linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Nava kishore Manne <nava.manne@xilinx.com>,
Nava kishore Manne <navam@xilinx.com>
Subject: [PATCH v3] gpio: Added zynq specific check for special pins on bank zero
Date: Fri, 23 Sep 2016 16:56:58 +0530 [thread overview]
Message-ID: <1474630018-9986-1-git-send-email-navam@xilinx.com> (raw)
From: Nava kishore Manne <nava.manne@xilinx.com>
This patch adds zynq specific check for bank 0 pins 7 and 8
are special and cannot be used as inputs
Signed-off-by: Nava kishore Manne <navam@xilinx.com>
Reported-by: Jonas Karlsson <Jonas.d.karlsson@gmail.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
---
Changes for v3:
-Fixed some minor comments.
Changes for v2:
-Removed un-used quirks for zynqmp.
drivers/gpio/gpio-zynq.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index e72794e..6b4d10d 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -96,6 +96,9 @@
/* GPIO upper 16 bit mask */
#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000
+/* For GPIO quirks */
+#define ZYNQ_GPIO_QUIRK_FOO BIT(0)
+
/**
* struct zynq_gpio - gpio device private data structure
* @chip: instance of the gpio_chip
@@ -122,6 +125,7 @@ struct zynq_gpio {
*/
struct zynq_platform_data {
const char *label;
+ u32 quirks;
u16 ngpio;
int max_bank;
int bank_min[ZYNQMP_GPIO_MAX_BANK];
@@ -238,13 +242,19 @@ static void zynq_gpio_set_value(struct gpio_chip *chip, unsigned int pin,
static int zynq_gpio_dir_in(struct gpio_chip *chip, unsigned int pin)
{
u32 reg;
+ bool is_zynq_gpio;
unsigned int bank_num, bank_pin_num;
struct zynq_gpio *gpio = gpiochip_get_data(chip);
+ is_zynq_gpio = gpio->p_data->quirks & ZYNQ_GPIO_QUIRK_FOO;
zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio);
- /* bank 0 pins 7 and 8 are special and cannot be used as inputs */
- if (bank_num == 0 && (bank_pin_num == 7 || bank_pin_num == 8))
+ /*
+ * On zynq bank 0 pins 7 and 8 are special and cannot be used
+ * as inputs.
+ */
+ if (is_zynq_gpio && bank_num == 0 &&
+ (bank_pin_num == 7 || bank_pin_num == 8))
return -EINVAL;
/* clear the bit in direction mode reg to set the pin as input */
@@ -627,6 +637,7 @@ static const struct zynq_platform_data zynqmp_gpio_def = {
static const struct zynq_platform_data zynq_gpio_def = {
.label = "zynq_gpio",
+ .quirks = ZYNQ_GPIO_QUIRK_FOO,
.ngpio = ZYNQ_GPIO_NR_GPIOS,
.max_bank = ZYNQ_GPIO_MAX_BANK,
.bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(),
--
2.1.2
next reply other threads:[~2016-09-23 11:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-23 11:26 Nava kishore Manne [this message]
2016-09-23 13:27 ` [PATCH v3] gpio: Added zynq specific check for special pins on bank zero Linus Walleij
2016-09-24 15:18 ` Vesa Jääskeläinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474630018-9986-1-git-send-email-navam@xilinx.com \
--to=nava.manne@xilinx.com \
--cc=gnurou@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=navam@xilinx.com \
--cc=soren.brinkmann@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).