From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jerome Brunet Subject: [PATCH v2 2/9] dt-bindings: interrupt-controller: add DT binding for meson GPIO interrupt controller Date: Wed, 19 Oct 2016 17:21:13 +0200 Message-ID: <1476890480-8884-3-git-send-email-jbrunet@baylibre.com> References: <1476890480-8884-1-git-send-email-jbrunet@baylibre.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <1476890480-8884-1-git-send-email-jbrunet@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org To: Carlo Caione , Kevin Hilman , Thomas Gleixner , Jason Cooper , Marc Zyngier , Rob Herring Cc: Jerome Brunet , linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Linus Walleij , Catalin Marinas , Will Deacon , Russell King List-Id: linux-gpio@vger.kernel.org This commit adds the device tree bindings description for Amlogic's GPIO interrupt controller available on the meson8, meson8b and gxbb SoC families Signed-off-by: Jerome Brunet --- Rob, I did not include the Ack you gave for the RFC as bindings have slightly changed. Only the interrupt property has be removed following a discussion I had with Marc .../amlogic,meson-gpio-intc.txt | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt new file mode 100644 index 000000000000..2464d9a0865d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt @@ -0,0 +1,31 @@ +Amlogic meson GPIO interrupt controller + +Meson SoCs contains an interrupt controller which is able watch the SoC pads +and generate an interrupt on edges or level. The controller is essentially a +256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge +or level and polarity. We don’t expose all 256 mux inputs because the +documentation shows that upper part is not mapped to any pad. The actual number +of interrupt exposed depends on the SoC. + +Required properties: + +- compatible : should be either + "amlogic,meson8-gpio-intc” for meson8 SoCs (AML7826MX) or + “amlogic,meson8b-gpio-intc” for meson8b SoCs (S805) or + “amlogic,meson-gxbb-gpio-intc” for GXBB SoCs (S905) +- interrupt-parent : a phandle to the GIC the interrupts are routed to. + Usually this is provided at the root level of the device tree as it is + common to most of the SoC +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 2. + +Example: + +gpio_interrupt: interrupt-controller@9880 { + compatible = "amlogic,meson-gxbb-gpio-intc"; + reg = <0x0 0x9880 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; +}; -- 2.7.4