From: Bai Ping <ping.bai@nxp.com>
To: shawnguo@kernel.org, mturquette@baylibre.com,
sboyd@codeaurora.org, robh+dt@kernel.org, mark.rutland@arm.com,
linus.walleij@linaro.org
Cc: devicetree@vger.kernel.org, kernel@pengutronix.de,
daniel.lezcano@linaro.org, linux-gpio@vger.kernel.org,
p.zabel@pengutronix.de, jacky.baip@gmail.com,
fabio.estevam@nxp.com, tglx@linutronix.de,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/12] Add basic code support for imx6sll
Date: Tue, 27 Dec 2016 17:47:38 +0800 [thread overview]
Message-ID: <1482832070-22668-1-git-send-email-ping.bai@nxp.com> (raw)
The i.MX 6SoloLiteLite application processors are NXP's
latest additions to a growing family of multimedia-focused
products offering high-performance processing optimized for
lowest power consumption. The i.MX 6SoloLiteLite processors
feature NXP's advanced implementation of the ARM Cortex-A9 core,
which can be interfaced with LPDDR3 and LPDDR2 DRAM memory devices.
i.MX6SLL is a new SOC of the i.MX6 family, shares many common modules,
so most of the MSL code can be resued from i.MX6 serious SOC.
change for V2:
- address comments in dts and dtsi from Fabio.
- split the doc update into two patch, fix typo.
- address comments in clock driver, add necessary 'const'qualifier.
Bai Ping (12):
ARM: imx: Add basic msl support for imx6sll
driver: clocksource: add gpt timer for imx6sll
Document: dt: binding: imx: update clock doc for imx6sll
driver: clk: imx: Add clock driver for imx6sll
Document: dt: binding: imx: update pinctrl doc for imx6sll
driver: pinctrl: imx: Add pinctrl driver support for imx6sll
ARM: dts: imx: Add basic dtsi for imx6sll
ARM: dts: imx: Add imx6sll EVK board dts support
ARM: debug: Add low level debug support for imx6sll
ARM: imx: Add suspend/resume support for imx6sll
ARM: imx: correct i.mx6sll dram io low power mode
ARM: configs: enable imx6sll support in defconfig
.../devicetree/bindings/clock/imx6sll-clock.txt | 37 +
.../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 +
arch/arm/Kconfig.debug | 9 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx6sll-evk.dts | 474 +++++++++++
arch/arm/boot/dts/imx6sll-pinfunc.h | 882 +++++++++++++++++++++
arch/arm/boot/dts/imx6sll.dtsi | 843 ++++++++++++++++++++
arch/arm/configs/imx_v6_v7_defconfig | 1 +
arch/arm/include/debug/imx-uart.h | 10 +
arch/arm/mach-imx/Kconfig | 8 +
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/cpu.c | 3 +
arch/arm/mach-imx/cpuidle-imx6sl.c | 7 +-
arch/arm/mach-imx/gpc.c | 8 +
arch/arm/mach-imx/mach-imx6sl.c | 10 +-
arch/arm/mach-imx/mxc.h | 6 +
arch/arm/mach-imx/pm-imx6.c | 49 +-
arch/arm/mach-imx/suspend-imx6.S | 29 +-
drivers/clk/imx/Makefile | 1 +
drivers/clk/imx/clk-imx6sll.c | 369 +++++++++
drivers/clocksource/timer-imx-gpt.c | 1 +
drivers/pinctrl/freescale/Kconfig | 7 +
drivers/pinctrl/freescale/Makefile | 1 +
drivers/pinctrl/freescale/pinctrl-imx6sll.c | 385 +++++++++
include/dt-bindings/clock/imx6sll-clock.h | 204 +++++
25 files changed, 3352 insertions(+), 32 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
create mode 100644 arch/arm/boot/dts/imx6sll-evk.dts
create mode 100644 arch/arm/boot/dts/imx6sll-pinfunc.h
create mode 100644 arch/arm/boot/dts/imx6sll.dtsi
create mode 100644 drivers/clk/imx/clk-imx6sll.c
create mode 100644 drivers/pinctrl/freescale/pinctrl-imx6sll.c
create mode 100644 include/dt-bindings/clock/imx6sll-clock.h
--
1.9.1
next reply other threads:[~2016-12-27 9:47 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-27 9:47 Bai Ping [this message]
2016-12-27 9:47 ` [PATCH v2 01/12] ARM: imx: Add basic msl support for imx6sll Bai Ping
2016-12-27 9:47 ` [PATCH v2 02/12] driver: clocksource: add gpt timer " Bai Ping
2017-01-09 10:30 ` Daniel Lezcano
2016-12-27 9:47 ` [PATCH v2 03/12] Document: dt: binding: imx: update clock doc " Bai Ping
2017-01-03 17:48 ` Rob Herring
2016-12-27 9:47 ` [PATCH v2 04/12] driver: clk: imx: Add clock driver " Bai Ping
[not found] ` <1482832070-22668-5-git-send-email-ping.bai-3arQi8VN3Tc@public.gmane.org>
2017-01-03 17:49 ` Rob Herring
2017-01-10 0:37 ` Stephen Boyd
[not found] ` <20170110003753.GM17126-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-10 3:18 ` Jacky Bai
2017-01-12 22:05 ` Stephen Boyd
2017-01-13 3:04 ` Jacky Bai
2017-01-21 1:00 ` Stephen Boyd
2017-01-22 2:14 ` Jacky Bai
2016-12-27 9:47 ` [PATCH v2 05/12] Document: dt: binding: imx: update pinctrl doc " Bai Ping
2016-12-27 12:59 ` Linus Walleij
2017-01-09 2:32 ` Jacky Bai
[not found] ` <AM3PR04MB5304992095753B761E66A9A87640-f56W/S9L6NRDGcFijYBXZgfhPeD8jYilXA4E9RH9d+qIuWR1G4zioA@public.gmane.org>
2017-01-11 14:33 ` Linus Walleij
2017-01-12 2:57 ` Jacky Bai
2017-01-13 15:22 ` Linus Walleij
2017-01-17 6:35 ` Jacky Bai
2017-01-18 12:24 ` Linus Walleij
2017-01-23 6:04 ` Shawn Guo
2017-01-23 7:17 ` Jacky Bai
2017-01-26 14:05 ` Linus Walleij
2017-02-16 7:51 ` Dong Aisheng
2017-02-24 9:02 ` Dong Aisheng
2017-03-14 13:54 ` Linus Walleij
2017-03-15 14:05 ` Dong Aisheng
2016-12-27 9:47 ` [PATCH v2 06/12] driver: pinctrl: imx: Add pinctrl driver support " Bai Ping
2016-12-27 13:01 ` Linus Walleij
2017-01-03 1:00 ` Jacky Bai
2016-12-27 9:47 ` [PATCH v2 07/12] ARM: dts: imx: Add basic dtsi " Bai Ping
2016-12-27 9:47 ` [PATCH v2 08/12] ARM: dts: imx: Add imx6sll EVK board dts support Bai Ping
2016-12-27 9:47 ` [PATCH v2 09/12] ARM: debug: Add low level debug support for imx6sll Bai Ping
2016-12-27 9:47 ` [PATCH v2 10/12] ARM: imx: Add suspend/resume " Bai Ping
2016-12-27 9:47 ` [PATCH v2 11/12] ARM: imx: correct i.mx6sll dram io low power mode Bai Ping
2016-12-27 9:47 ` [PATCH v2 12/12] ARM: configs: enable imx6sll support in defconfig Bai Ping
2017-01-23 6:10 ` [PATCH v2 00/12] Add basic code support for imx6sll Shawn Guo
2017-01-23 7:18 ` Jacky Bai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1482832070-22668-1-git-send-email-ping.bai@nxp.com \
--to=ping.bai@nxp.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=jacky.baip@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=shawnguo@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).